1. Introduction
Thank you for choosing the Mackie Thump210 10" 1400W Compact Powered Loudspeaker. This manual provides essential information for the safe and efficient operation of your new audio equipment. The Thump210 is designed for robust performance, featuring a 10-inch woofer, 1-inch compression driver, and 1400W Class-D amplification, making it suitable for various applications including mobile PA systems, DJ performances, and live sound.
2. Important Safety Information
- Power Source: Connect the loudspeaker only to the specified power supply as indicated on the unit.
- Ventilation: Ensure adequate ventilation around the unit. Do not block ventilation openings.
- Water and Moisture: Do not expose the unit to rain or moisture. Do not use near water.
- Heat: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Cables: Protect the power cord from being walked on or pinched. Do not use damaged power cords.
- Servicing: Refer all servicing to qualified service personnel. Do not attempt to service the unit yourself.
- Mounting: When mounting on a pole, ensure the pole is stable and capable of supporting the loudspeaker's weight.
3. Package Contents
Upon unpacking your Mackie Thump210, please ensure all items are present:
- Mackie Thump210 Powered Loudspeaker
- IEC Power Cable
- Quick Start Guide
4. Key Features
- High Power Output: 1400W Class-D amplification for room-filling sound.
- Integrated Mixer: Built-in 2-channel mixer with two combo TRS/XLR input jacks and an 1/8" stereo line in.
- Feedback Eliminator: Instantly prevents microphone feedback during performances.
- Music Ducking Mode: Automatically lowers Channel 2 volume when speaking into a microphone on Channel 1.
- Versatile Voicing Modes: Optimized EQ presets for Music, Live, Club, and Monitor applications.
- Outdoor Mode: Applies additional EQ to boost frequencies for clear sound in open-air environments.
- Bluetooth Connectivity: Allows wireless audio streaming and linking of two Thump210 speakers for true wireless stereo (TWS).
- Durable Construction: Lightweight and Built-Like-A-Tank design for reliability.
5. Product Overview: Controls and Connections
Familiarize yourself with the rear panel controls and connections of your Thump210 loudspeaker.
Image: Rear panel diagram of the Mackie Thump210, illustrating the various inputs, outputs, and control knobs.
- 1400W Class D Amplifier: The internal power amplification system.
- Mic/Line Switch: Selects input sensitivity for microphone or line-level signals.
- Input Gain: Adjusts the input level for each channel.
- Feedback Eliminator: Button to activate the feedback suppression feature.
- Music Ducking Mode: Button to activate the music ducking feature.
- Main Volume: Controls the overall output volume of the loudspeaker.
- XLR Thru Output: Sends the mixed audio signal to another loudspeaker or device.
- 1/8" Input: Stereo input for connecting smartphones or media players.
- XLR/TRS Inputs: Combo jacks for connecting microphones, instruments, or line-level devices.
- Standard Pole Mount, Monitor Wedge: Integrated mounting options for flexible placement.
6. Setup
6.1 Placement Options
The Thump210 offers versatile placement options:
- Pole Mounting: Use the integrated pole mount socket (10) to elevate the speaker for optimal sound dispersion.
- Floor/Stage Monitor: The cabinet design allows the speaker to be placed on its side as a stage monitor.
- Stand-Alone: Place the speaker on a flat, stable surface.
Image: A Mackie Thump210 loudspeaker mounted on a pole, showcasing its powerful output.
6.2 Power Connection
Connect the provided IEC power cable to the AC input on the rear panel of the loudspeaker, then plug it into a suitable power outlet.
6.3 Initial Power On
Once connected to power, turn on the loudspeaker using the power switch located on the rear panel. The power LED on the front of the speaker will illuminate.
7. Operating Instructions
7.1 Connecting Audio Sources
The Thump210 features a 2-channel mixer for connecting various audio devices:
- XLR/TRS Inputs (9): Connect microphones, guitars, keyboards, or other line-level devices using XLR or 1/4" TRS cables. Use the Mic/Line switch (2) to select the appropriate input sensitivity for each channel.
- 1/8" Stereo Line In (8): Connect a smartphone, tablet, or media player using a 1/8" stereo cable.
7.2 Adjusting Volume and Gain
- Input Gain (3): Adjust the individual gain knobs for Channel 1 and Channel 2 to set the input level for each connected device. Monitor the signal indicators to avoid clipping.
- Main Volume (6): Use the Main Volume knob to control the overall output level of the loudspeaker.
7.3 Voicing Modes
Select from four optimized voicing modes to tailor the loudspeaker's sound for your application:
- Music: Ideal for general music playback.
- Live: Optimized for live vocal and instrument performances.
- Club: Provides enhanced bass and treble for DJ sets and dance music.
- Monitor: Tailored for stage monitoring, reducing low-end rumble.
7.4 Special Features
- Outdoor Mode: Activate this mode when using the loudspeaker in outdoor environments to compensate for sound loss and ensure clear projection.
- Music Ducking Mode (5): Press the Music Ducking button to automatically lower the volume of Channel 2 whenever a signal is detected on Channel 1 (e.g., a microphone for announcements). This allows for clear speech over background music.
- Feedback Eliminator (4): Engage the Feedback Eliminator button to automatically detect and suppress unwanted microphone feedback, ensuring a clean audio output.
Image: A person using a microphone with the Thump210, demonstrating the Music Ducking feature.
Image: A close-up view of the Feedback Eliminator button on the Thump210's control panel.
7.5 Bluetooth Connectivity
The Thump210 supports Bluetooth for wireless audio streaming and linking:
- Pairing: Activate Bluetooth on your device and press the 'PAIR' button on the loudspeaker's rear panel. Select 'Thump210' from your device's Bluetooth list to connect.
- Linking (TWS): To create a true wireless stereo setup, pair your device to one Thump210, then press the 'LINK' button on both speakers to connect them wirelessly.
8. Maintenance
- Cleaning: Clean the exterior of the loudspeaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect power cables and connections for any signs of damage.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power switch off; Outlet not working. | Check power cable connections; Turn power switch on; Test outlet with another device. |
| No sound output | Input gain too low; Main volume too low; Incorrect input selected; Damaged audio cable. | Increase input gain and main volume; Verify correct input selection; Test with a different audio cable. |
| Feedback (squealing sound) | Microphone too close to speaker; High gain settings. | Activate Feedback Eliminator; Reposition microphone; Reduce input gain. |
| Bluetooth not connecting | Speaker not in pairing mode; Device out of range; Interference. | Press 'PAIR' button; Move device closer to speaker; Reduce other wireless activity. |
10. Specifications
- Speaker Type: Powered Loudspeaker
- Woofer Diameter: 10 Inches
- Speaker Maximum Output Power: 1400 Watts
- Frequency Response: 23 KHz
- Connectivity Technology: Auxiliary, Bluetooth, XLR
- Audio Output Mode: Stereo
- Control Method: Touch
- Material: Metal, Plastic
- Color: Black
- Product Dimensions: 12.8"D x 13"W x 22.4"H
- Item Weight: 29.7 Pounds
- Model Name: Thump210
- Manufacturer: Mackie
- UPC: 810128261319
11. Warranty and Support
Your Mackie Thump210 Loudspeaker comes with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Mackie website. For technical support, service, or replacement parts, please contact Mackie customer service.
