Introduction
Thank you for choosing the Linkind StarRay Solar Outdoor Spotlights. This manual provides detailed instructions for the safe and efficient use of your new solar lights. These spotlights are designed for outdoor use, featuring motion detection, three lighting modes, and a warm white light output of 3000K and 1000 lumens. Their IP67 rating ensures durability in various weather conditions.
Safety Instructions
- Ensure the solar panel receives direct sunlight for optimal charging.
- Do not attempt to disassemble or modify the product. This may void the warranty and pose safety risks.
- Keep the product away from fire or extreme heat sources.
- Do not immerse the product in water for extended periods, despite its IP67 rating.
- Handle the ground stake and wall mount components carefully during installation to avoid injury.
- Dispose of the battery responsibly according to local regulations.
Package Contents
Please check the package to ensure all components are present:
- 4 x Linkind StarRay Solar Outdoor Spotlights
- 4 x Ground Stakes
- 4 x Wall Mount Brackets
- Mounting Screws and Wall Plugs (for wall installation)
- User Manual (this document)
Image: Four Linkind StarRay solar outdoor spotlights, showing the main unit and the ground stake attachment. This illustrates the complete product package.
Product Features
- High Brightness: Equipped with 22 LED beads, delivering up to 1000 lumens of 3000K warm white light.
- Advanced Optical Lenses: Enhanced lenses for a wider and more intense spot range.
- Motion Detection: Integrated motion sensor with a detection range of 3-8 meters and a 120° angle.
- Three Lighting Modes:
- Mode 1 (Continuous Dim): Low light output continuously throughout the night. Motion detection is inactive.
- Mode 2 (Dim to Bright): Low light output, brightens to 100% for 20 seconds upon motion detection, then returns to low light.
- Mode 3 (Off to Bright): Light is off, brightens to 100% for 20 seconds upon motion detection, then turns off.
- Durable Construction: IP67 waterproof, frostproof, and heatproof rating for all-weather performance.
- 2-in-1 Installation: Can be installed in the ground using a stake or mounted on a wall.
- Adjustable Angle: Vertical 180° and horizontal 360° rotation for precise light direction.
- Energy Efficient: Solar-powered with a high conversion rate (22%) for charging during the day and automatic illumination at night.
Image: A close-up view of the spotlight head, highlighting the 22 LED beads and unique optical lenses. Text indicates 1000 lumens output compared to 200 lumens from other lights.
Image: A visual representation of the three operational modes: 1) All night dim light, 2) Dim light that brightens with motion, and 3) Light off that brightens with motion.
Image: A person walking with a dog, demonstrating the 3-8 meter detection distance and 120° detection angle of the motion sensor.
Image: Examples of the spotlights in use, illuminating garden stairs, a poolside area, and a fence, showcasing their versatility in different outdoor settings.
Setup and Installation
The Linkind StarRay Solar Spotlights offer two installation methods:
Method 1: Ground Installation
- Attach the ground stake to the bottom of the spotlight unit. Ensure it is securely fastened.
- Choose a location in your garden or yard where the solar panel will receive at least 6-8 hours of direct sunlight daily.
- Insert the ground stake firmly into the soil.
- Adjust the angle of the solar panel and the light head to your desired position. The light head can rotate 360° horizontally and 180° vertically.
Method 2: Wall Mounting
- Attach the wall mount bracket to the bottom of the spotlight unit.
- Select a suitable wall location that receives ample direct sunlight for the solar panel.
- Mark the positions for drilling holes using the bracket as a template.
- Drill holes and insert wall plugs.
- Secure the spotlight unit to the wall using the provided screws.
- Adjust the angle of the solar panel and the light head for optimal lighting and charging.
Image: Depicts the two installation methods: one spotlight installed in the ground and another mounted on a fence, illustrating versatility.
Operating Instructions
The spotlight has a power button, usually located on the back or underside of the main light unit. Press this button to cycle through the three operating modes:
- First Press: Activates Mode 1 (Continuous Dim Light). The light will stay at a low brightness throughout the night.
- Second Press: Activates Mode 2 (Dim to Bright with Motion). The light will be dim, then brighten to 100% for 20 seconds when motion is detected, returning to dim.
- Third Press: Activates Mode 3 (Off to Bright with Motion). The light will be off, then brighten to 100% for 20 seconds when motion is detected, returning to off.
- Fourth Press: Turns the light OFF.
The light will automatically charge during the day and activate its selected mode at dusk.
Image: Illustrates the solar panel charging during daylight hours with a 22% conversion rate, and the light activating at night upon motion detection (a dog walking).
Maintenance
- Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
- Obstructions: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel.
- Battery: The integrated AA lithium battery is designed for long-term use. If the light performance significantly degrades over time, consider replacing the battery with a compatible rechargeable AA lithium battery, if accessible and recommended by the manufacturer.
- Winter Care: In regions with heavy snow, clear snow from the solar panel to allow charging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient sunlight for charging. Battery depleted. Switch is OFF. | Ensure the solar panel is in direct sunlight for 6-8 hours. Turn the switch ON. Check for obstructions. |
| Light duration is short. | Insufficient charging. Solar panel is dirty. | Relocate the light to a sunnier spot. Clean the solar panel. |
| Motion sensor not working. | Light is in Mode 1 (Continuous Dim). Sensor is obstructed. | Switch to Mode 2 or 3. Ensure the sensor is clear of obstructions. |
| Light is dim or flickers. | Low battery charge. Faulty LED. | Allow for full day charging. If problem persists, contact customer support. |
Specifications
| Brand | Linkind |
| Model Number | 810175710075 |
| Light Source | 22 LED beads |
| Luminous Flux | 1000 Lumens |
| Color Temperature | 3000K (Warm White) |
| Motion Detection Range | 3-8 meters |
| Motion Detection Angle | 120° |
| Lighting Angle | 90° |
| Adjustable Angle | Vertical 180°, Horizontal 360° |
| Waterproof Rating | IP67 |
| Power Source | Solar Powered |
| Battery | 1 AA rechargeable battery (included) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions (L x W x H) | 13 x 31 x 17 cm (5.1 x 12.2 x 6.7 inches) |
| Item Weight | 1.16 Kilograms (2.56 lbs) |
Image: A spotlight being hit by water, demonstrating its IP67 rating for waterproof, frostproof, and heatproof durability.
Image: Technical diagram displaying the product dimensions, 360°/180° adjustable angle, motion sensor location, and PET surface layer of the solar panel.
Warranty and Support
Specific warranty information was not provided in the product details. For warranty claims or technical support, please contact Linkind customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for any warranty-related inquiries.
For further assistance, you may visit the Linkind Brand Store.
