KKB 4G LTE Cellular Solar Security Camera G110 User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KKB 4G LTE Cellular Solar Security Camera (Model G110). This camera is designed for outdoor surveillance in locations without Wi-Fi access, utilizing a 4G LTE cellular network for connectivity and solar power for continuous operation. It features 2K HD video, color night vision, 355° pan and 90° tilt functionality, PIR motion detection, and two-way audio communication.

Image 1.1: Overview of the KKB G110 4G LTE Cellular Solar Security Camera.

2. What's in the Box

Please verify that all components are present before proceeding with installation:

• KKB 4G LTE Security Camera
• Solar Panel
• User Manual (this document)
• Installation Accessories (screws, wall anchors, mounting bracket)

3. Setup Guide

3.1 Initial Charging

Before first use, fully charge the camera's built-in 10400 mAh battery using a standard 5V USB charger (not included) for approximately 8-10 hours. The solar panel will maintain the charge after initial setup.

3.2 SIM Card and Micro SD Card Installation

The camera comes with a built-in, non-replaceable SIM card that supports AT&T, T-Mobile, and Verizon 4G cellular networks. No physical SIM card insertion is required for cellular connectivity.

To enable local video storage, insert a Micro SD card (up to 128GB, not included) into the designated slot. Ensure the chip faces upwards. A Micro SD card is required for recording and playback without a cloud subscription.

Image 3.1: Camera button and slot introduction. Note the built-in SIM card is not user-accessible.

3.3 App Download and Account Creation

1. Download the "iCam365" app from your smartphone's app store (iOS or Android).
2. Register for a new account and log in.
3. Follow the in-app instructions to add your camera. This typically involves scanning a QR code on the camera or manually entering its ID.

3.4 Mounting the Camera and Solar Panel

Choose a mounting location that provides a clear view of the area you wish to monitor and receives ample direct sunlight for the solar panel. The camera is IP66 waterproof, suitable for outdoor use.

1. Attach the mounting bracket to a wall or sturdy surface using the provided screws and wall anchors.
2. Secure the camera to the mounting bracket.
3. Mount the solar panel in a location that maximizes sun exposure throughout the day. Connect the solar panel cable to the camera's charging port.
4. Adjust the camera's angle to cover the desired surveillance area. The camera offers 355° pan and 90° tilt capabilities, which can be controlled via the app after setup.

Image 3.2: Example of camera and solar panel outdoor installation.

Image 3.3: Illustrates the camera's pan and tilt range.

4. Operating Instructions

4.1 Live View and Playback

Open the iCam365 app and select your camera to access the live video feed. You can pan and tilt the camera remotely using the controls within the app. Recorded footage stored on the Micro SD card or cloud (if subscribed) can be accessed via the playback function.

4.2 Two-Way Audio

The camera supports two-way audio. Tap the microphone icon in the app to speak through the camera's speaker, and listen to audio from the camera's microphone.

Image 4.1: Demonstrating two-way audio communication.

4.3 PIR Motion Detection and Alerts

The camera features a Passive Infrared (PIR) sensor for detecting human and animal motion. When motion is detected, the camera will record an event and send a push notification to your smartphone via the iCam365 app.

• Adjust motion detection sensitivity in the app settings to minimize false alerts.
• Set up activity zones to focus detection on specific areas.

Image 4.2: Motion detection alert notification on a smartphone.

4.4 Night Vision Modes

The camera offers both 2K color night vision and infrared night vision. Color night vision is activated in low-light conditions with the built-in spotlight, while infrared night vision provides clear black-and-white footage in complete darkness.

Image 4.3: Comparison of color and infrared night vision capabilities.

4.5 Cellular Data Plan

The camera requires an active cellular data plan for remote access and notifications. 300MB of prepaid data is included for initial use. Data plans can be renewed within the iCam365 app. Available plans are:

• 1 month: $14.9 USD
• 6 months: $79.9 USD
• 12 months: $149.9 USD

Ensure your data plan is active to maintain full functionality of the camera.

Image 4.4: KKB cellular data plan options.

5. Maintenance

• Solar Panel Cleaning: Periodically clean the solar panel surface with a soft, damp cloth to ensure optimal sunlight absorption and charging efficiency.
• Battery Health: While the solar panel provides continuous power, extreme weather conditions or prolonged periods of low sunlight may affect battery levels. Monitor battery status via the app.
• Firmware Updates: Check the iCam365 app regularly for firmware updates to ensure your camera has the latest features and security enhancements.

6. Troubleshooting

6.1 Camera Not Connecting to Network

• Ensure the camera's built-in SIM card has an active data plan. Check your subscription status in the iCam365 app.
• Verify that the camera is in an area with sufficient 4G LTE cellular coverage (AT&T, T-Mobile, Verizon).
• Try restarting the camera by pressing and holding the power button.
• Perform a factory reset by pressing and holding the reset button if issues persist. Note that this will revert settings to default.

6.2 Motion Detection Issues

• Too many false alerts: Adjust the PIR sensitivity settings in the app. Reduce sensitivity for areas with frequent non-human movement (e.g., trees swaying, small animals).
• No alerts: Ensure PIR detection is enabled in the app. Check the camera's field of view and ensure no obstructions are blocking the sensor. Increase sensitivity if necessary.

6.3 Battery Not Charging

• Ensure the solar panel is clean and free from dirt or debris.
• Verify the solar panel is positioned to receive maximum direct sunlight throughout the day.
• Check the connection cable between the solar panel and the camera for any damage or loose connections.
• If the battery is completely depleted, it may require initial charging via a USB power adapter before the solar panel can effectively maintain it.

Image 6.1: Solar panel providing power to the camera.

6.4 Camera Rotation (Pan/Tilt) Not Working

• Ensure the camera has sufficient power.
• Check for any physical obstructions that might be preventing movement.
• Restart the camera and the iCam365 app.
• If the issue persists, a factory reset might be necessary.

7. Specifications

Image 7.1: IP66 waterproof rating and temperature tolerance.

8. Warranty and Support

KKB products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or contact KKB customer support.

Customer Support:

For technical assistance or inquiries, please contact KKB customer support through the iCam365 app's online contact feature or via email. KKB offers 7x24 hours professional technical support.

Image 8.1: KKB customer support information.