MOOKA PR1 Air Filter
Contents
Mooka PR1 Air Purifier Replacement Filter Instruction Manual
Model: PR1 Air Filter
Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Mooka PR1 Air Purifier Replacement Filter. Please read these instructions carefully before use to ensure optimal performance and longevity of your filter.

Image: Mooka PR1 Air Purifier Replacement Filter in its packaging, showing the 3-in-1 HEPA H13 Activated Carbon filter.
Setup and Installation
Follow these steps to correctly install the Mooka PR1 Replacement Filter into your air purifier.
- Unpack the Filter: Carefully remove the new filter from its plastic packaging. The filter must be removed from its protective plastic bag before installation.
- Access the Filter Compartment: Turn off and unplug the air purifier. Locate the air inlet cover, typically at the bottom or side of the unit. Open the cover to access the filter compartment.
- Remove Old Filter: Gently pull out the used filter from the air purifier. Dispose of the old filter responsibly.
- Insert New Filter: Place the new Mooka PR1 Replacement Filter into the compartment, ensuring it fits securely.
- Close Compartment: Reattach the air inlet cover, ensuring it is properly sealed.
- Power On: Plug in the air purifier and turn it on.
- Reset Filter Indicator: After replacing the filter, press and hold the 'Filter Reset' button on the control panel for 3 seconds to reset the filter life indicator.

Image: Visual guide for inserting the Mooka PR1 filter into the air purifier unit.
Video: This video demonstrates the unboxing and setup process for the Mooka PR1 Air Purifier, including filter installation and initial power-on steps.
Operating the Air Purifier (Filter-Related Functions)
The Mooka PR1 Air Purifier features a control panel with various settings that interact with the filter system.
Control Panel Overview

Image: Close-up of the air purifier's control panel, highlighting buttons for Filter Reset, Timer, Child Lock, and Power.

Image: Close-up of the air purifier's control panel, highlighting buttons for Fan Speed, Sleep Mode, Display Off, and Pet Mode.
Key Functions:
- Filter Reset: After replacing the filter, press and hold this button for 3 seconds to reset the filter life indicator.
- Fan Speed (1F, 2F, 3F, Auto, Pet): Adjusts the fan speed. Higher speeds increase air purification rate. The 'Auto' mode adjusts speed based on detected air quality. 'Pet Mode' operates at maximum speed to address pet-related odors and dander.
- Sleep Mode: Activates the lowest fan speed and turns off the display for quiet operation during sleep.
- Timer (2H, 5H, 8H): Sets the air purifier to operate for a specified duration before automatically turning off.
- Child Lock: Press and hold for 3-5 seconds to activate or deactivate. When active, other buttons cannot be operated, preventing accidental changes.
- Aroma Function: Open the small cover on the control panel and add essential oils to the aroma pad to diffuse fragrance into the room. For first use, moisten the pad with more essential oil.
Maintenance
Regular maintenance of the washable pre-filter is crucial for extending the life of your H13 HEPA filter and maintaining optimal air purification performance.
Cleaning the Washable Pre-Filter:
- Remove Pre-Filter: Turn off and unplug the air purifier. Open the filter compartment and carefully detach the white pre-filter layer from the main filter element. The pre-filter is typically attached with Velcro.
- Rinse: Rinse the pre-filter under running water to remove accumulated dust, pet hair, and other large particles. Alternatively, use a vacuum cleaner to clean it.
- Air Dry: Allow the pre-filter to air dry completely before reattaching it to the main filter. Ensure it is thoroughly dry to prevent mold or mildew growth.
- Reattach: Once dry, reattach the pre-filter to the main filter element, ensuring it is securely fastened.
- Reinstall Filter: Place the assembled filter back into the air purifier and close the compartment cover.

Image: A visual guide demonstrating the process of removing and rinsing the washable pre-filter under running water.
Video: This video provides detailed cleaning tips for the Mooka PR1 washable pre-filter, showing how to remove, wash, and reattach it.
Filter Replacement Schedule:
The H13 True HEPA filter should be replaced every 3-6 months for optimal purification, depending on usage and air quality. The air purifier features a filter replacement reminder light that will illuminate when a replacement is due.
It is recommended to use official MOOKA replacement filters to ensure compatibility and performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Filter Replacement Indicator Light On | Filter has reached the end of its service life. | Replace the filter with a new Mooka PR1 Replacement Filter and reset the indicator by pressing and holding the 'Filter Reset' button for 3 seconds. |
| Reduced Airflow or Purification Efficiency | Clogged pre-filter or main filter. | Clean the washable pre-filter. If the issue persists, replace the main H13 HEPA filter. |
| Unpleasant Odor from Air Purifier | Saturated activated carbon filter or dirty pre-filter. | Clean the washable pre-filter. If the odor persists, replace the main H13 HEPA filter, as the activated carbon layer may be full. |
| Air Purifier Not Turning On | Power connection issue or filter not installed correctly. | Ensure the power adapter is securely connected. Verify the filter is correctly installed and the compartment cover is closed. |
Specifications
| Feature | Detail |
|---|---|
| Brand | MOOKA |
| Model Info | PR1 Air Filter |
| Item Weight | 1.06 pounds (0.48 Kilograms) |
| Product Dimensions | 11.41 x 10.75 x 1.18 inches (28.98 x 27.31 x 3.00 cm) |
| Material Type | H13 HEPA Filter |
| MERV Rating | 13 |
| Compatible Devices | Air Purifier |
| Number of Items | 1 |
| Included Components | Air Purifier Filter |

Image: Mooka PR1 filter showing its physical dimensions in centimeters and inches.

Image: Illustration highlighting the superior odor-absorbing capabilities of the activated carbon filter compared to standard carbon cotton cloth, indicating extended lifespan.
Warranty Information
For specific warranty details regarding your Mooka PR1 Air Purifier Replacement Filter, please refer to the documentation included with your original air purifier unit or visit the official MOOKA website. General warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Customer Support
If you encounter any issues or have questions regarding your Mooka PR1 Air Purifier Replacement Filter, please contact MOOKA customer support. Contact information can typically be found on the product packaging, the official MOOKA website, or through your retailer.
For additional resources and product information, visit the MOOKA Store on Amazon.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.