GIOTOHUN Cat Fountain User Manual

1. Introduction

Thank you for choosing the GIOTOHUN Cat Fountain. This manual provides essential information for the proper setup, operation, and maintenance of your new pet water fountain. Please read these instructions carefully before use to ensure optimal performance and the well-being of your pet.

Figure 1: GIOTOHUN Cat Fountain with included 16 filters (8 carbon, 8 foam).

2. Product Features

• 2L (64oz) Capacity: Provides 4-6 days of drinking water for an average adult cat, reducing refill frequency.
• Triple Filtration System: Utilizes activated carbon, high-density cotton, and a sponge filter to remove impurities, odors, and soften water.
• Built-in LED Light: A translucent water tank with an LED light allows for easy monitoring of water levels, especially in low light conditions.
• Dual Water Flow Modes: Offers both faucet and fountain modes to cater to different pet preferences and encourage increased water intake.
• Ultra-Quiet Operation: Designed for minimal noise output, ensuring a peaceful environment for both pets and owners.

Figure 2: The 2L capacity of the cat fountain, providing sufficient water for several days.

Figure 3: Illustration of the multi-layer filtration system, including cotton, activated carbon, and sponge layers.

3. Setup Instructions

1. Rinse Filters: Before first use, soak the carbon filter in water for 3-5 minutes to remove any toner residue. Rinse all filter components thoroughly under running water.
2. Assemble Pump: Attach the sponge filter to the pump.
3. Place Pump: Position the pump securely at the bottom of the water tank.
4. Insert Filter: Insert the main filter (flat side up) into the designated slot in the lid.
5. Fill Water Tank: Fill the water tank with clean water up to the 'MAX' line indicated on the translucent tank.
6. Attach Lid: Securely place the lid onto the water tank.
7. Connect Power: Plug the AC adapter into a power outlet.

Figure 4: Step-by-step guide for installing the filter and sponge.

Figure 5: Important step of rinsing and soaking the filter before initial operation.

4. Operating Instructions

Once assembled and filled, the fountain will begin circulating water. The built-in LED light will illuminate, allowing you to easily monitor the water level. The fountain offers two water flow modes: a gentle fountain flow and a faucet-like stream. These modes are designed to entice pets to drink more water, supporting their kidney health.

Figure 6: A cat enjoying the flowing water from the fountain's faucet mode.

5. Maintenance

Regular cleaning and filter replacement are crucial for maintaining water quality and extending the life of your fountain.

5.1 Cleaning

• The fountain has a detachable design, making its parts removable for convenient cleaning.
• Clean the water tank, lid, and pump regularly with mild soap and water. Rinse thoroughly to remove all soap residue.

5.2 Filter Replacement

• The carbon filter should be changed every 2-4 weeks to ensure optimal filtration and fresh water.
• The foam filter on the pump should also be checked and cleaned regularly, and replaced if heavily soiled or damaged.

Figure 7: Dimensions of the carbon and foam filters for replacement purposes.

6. Troubleshooting

• No Water Flow: Check if the pump is properly installed and submerged. Ensure the power adapter is securely plugged in. Clean the pump and filters for any blockages.
• Reduced Water Flow: This often indicates a clogged filter or pump. Clean or replace the filters and pump as per maintenance instructions.
• Excessive Noise: Ensure the water level is above the minimum mark. Clean the pump impeller and housing, as debris can cause noise.
• LED Light Not Working: Verify the power connection. If the light remains off, contact customer support.

7. Specifications

8. Warranty and Support

For any issues or replacement parts, please contact GIOTOHUN customer service. Refer to the product packaging or the official GIOTOHUN store on Amazon for specific warranty details and contact information.

Visit the GIOTOHUN Store for additional products and support.