Introduction
Thank you for choosing the Greenworks 60V 20" Brushless Cordless Pole Hedge Trimmer. This tool is designed for efficient and precise trimming of hedges and shrubs, offering the power of gas-powered tools without the associated noise, fumes, or maintenance. Its brushless motor ensures superior performance and extended runtime. The 20-inch dual-action, laser-cut blades can handle branches up to 1.2 inches thick, and the 7.5 ft MAX extension allows for easy reach to tall hedges. This manual provides essential information for safe assembly, operation, and maintenance of your hedge trimmer.
Image: The Greenworks 60V 20" Brushless Cordless Pole Hedge Trimmer, showing its full assembly with battery attached.
Important Safety Information
Always read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Personal Safety: Always wear eye protection (safety glasses), hearing protection, and heavy-duty gloves when operating the hedge trimmer. Wear long pants and sturdy footwear. Do not operate while barefoot or wearing open-toed sandals.
- Work Area Safety: Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool.
- Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Battery Pack Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs. When battery pack is not in use, keep it away from other metal objects.
- Hedge Trimmer Specific Safety: Keep all parts of the body away from the cutter blade. Do not attempt to remove cut material or hold material to be cut when blades are moving. Ensure the switch is off before clearing jammed material.
- Maintenance: Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Package Contents
Carefully unpack all items and ensure you have received the following:
- Greenworks 60V 20" Brushless Cordless Pole Hedge Trimmer (Model PH60L210)
- 2.0 Ah Lithium-Ion Battery
- Battery Charger
- Blade Sheath
- Operator's Manual (this document)
Inspect the tool for any damage that may have occurred during shipping. Do not discard the packing material until you have carefully inspected the tool and operated it satisfactorily.
Image: The included Greenworks 2.0 Ah Lithium-Ion battery and its dedicated charger.
Setup and Assembly
Before assembly, ensure the battery is removed from the tool.
- Charging the Battery:
- Connect the charger to a standard power outlet.
- Slide the battery pack into the charger. The indicator light on the charger will show the charging status.
- Allow the battery to fully charge before first use. A full charge typically takes 40 minutes.
- Assembling the Pole Sections:
- Align the arrow on the upper pole section with the arrow on the lower pole section.
- Push the sections together until they click securely into place. Ensure the locking mechanism is engaged.
- To extend the pole, loosen the locking collar, pull the pole to the desired length (up to 7.5 ft MAX extension), and tighten the collar securely.
- Attaching the Battery:
- Align the ribs on the battery with the grooves in the tool's battery port.
- Slide the battery into the tool until it locks into place. Ensure it is firmly seated.
- To remove, press the battery release button and slide the battery out.
Image: A detailed diagram illustrating the key components of the Greenworks 60V Pole Hedge Trimmer, including the easy trigger start, over-molded wrap-around handle, 7.5 ft MAX extension, 7-position articulating head, brushless motor, 3200 SPM cutting speed, and 20" dual-action laser-cut steel blades with 1.2" cut capacity.
Operating Instructions
Always ensure you are wearing appropriate personal protective equipment before operating the hedge trimmer.
- Starting the Trimmer:
- Ensure the battery is securely installed.
- Grip the main handle and the auxiliary handle firmly.
- Press and hold the safety lock-out button, then squeeze the trigger switch to start the trimmer.
- Release the safety lock-out button once the trimmer starts.
- Stopping the Trimmer:
- Release the trigger switch. The blades will stop quickly.
- Adjusting the Articulating Head:
- Ensure the trimmer is OFF and the battery is removed before adjusting the head.
- Locate the head adjustment button/lever.
- Press the button/lever and adjust the cutting head to one of the 7 available positions.
- Release the button/lever and ensure the head locks securely into place before use. This allows for precise cuts at various angles.
- Trimming Techniques:
- Horizontal Trimming: Hold the trimmer with the blades slightly angled (5-10 degrees) towards the direction of cut. Move the trimmer smoothly and evenly along the top of the hedge.
- Vertical Trimming: Hold the trimmer vertically and sweep the blades in an arc motion from bottom to top, or top to bottom, depending on the desired finish.
- Cutting Thick Branches: The trimmer can cut branches up to 1.2 inches thick. For thicker branches, use a slow, steady motion, allowing the blades to work through the material. Do not force the tool.
- Reaching Tall Hedges: Utilize the 7.5 ft extension feature to reach high areas without the need for a ladder. Maintain a stable stance and keep both hands on the tool.
Image: A man demonstrating the use of the Greenworks Pole Hedge Trimmer to trim a hedge, highlighting its runtime (up to 45 minutes), power (27 CC gas engine equivalent), and quick recharge time (40 minutes).
Image: A man using the Greenworks Pole Hedge Trimmer to reach and trim the top of a tall hedge, demonstrating the 7.5-foot extension capability.
Image: A man using the Greenworks Pole Hedge Trimmer to trim a low hedge, showcasing the 7-position pivoting head for achieving a perfect cut at any angle.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your tool. Always remove the battery before performing any maintenance.
- Blade Cleaning: After each use, clean the blades with a stiff brush to remove debris. Apply a light machine oil or blade lubricant to the blades to prevent rust and ensure smooth operation.
- Blade Sharpening: If the blades become dull, they can be sharpened by a qualified service technician. Do not attempt to sharpen them yourself unless you have the proper tools and experience.
- General Cleaning: Wipe down the tool's exterior with a damp cloth. Do not use strong detergents or solvents. Keep ventilation openings free of debris to prevent overheating.
- Battery Care: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Do not store the battery in a discharged state for extended periods.
- Storage: When not in use, store the hedge trimmer in a dry, secure location, out of reach of children. Always attach the blade sheath to protect the blades and prevent accidental injury.
Image: A woman using the Greenworks Pole Hedge Trimmer, illustrating the benefit of zero maintenance, meaning no oil, no filters, no belts, and no fumes are required for operation.
Troubleshooting
If you encounter issues with your hedge trimmer, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not start. | Battery not charged or improperly installed. Safety lock-out not engaged before trigger. | Ensure battery is fully charged and correctly inserted. Press safety lock-out button before squeezing trigger. |
| Blades are dull or jammed. | Debris caught in blades. Blades require sharpening. | Remove battery, then carefully clear any debris. If blades are dull, have them professionally sharpened. |
| Reduced cutting performance. | Dull blades. Overloading the tool. | Sharpen blades. Do not force the tool through thick material; take smaller passes. |
| Tool stops during operation. | Battery is low. Overload protection activated. | Recharge the battery. Reduce the load on the tool; allow it to cool down if it overheats. |
If the problem persists after attempting these solutions, contact Greenworks customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Greenworks |
| Model Number | PH60L210 |
| Power Source | Battery Powered (60V Lithium-Ion) |
| Blade Length | 20 Inches |
| Cutting Capacity | Up to 1.2 Inches |
| Speed | 3400 SPM (Strokes Per Minute) |
| Extension Length | Up to 7.5 ft MAX |
| Item Weight | 9.3 Pounds |
| Battery Included | 2.0 Ah Lithium-Ion |
| Charger Included | Yes (3-Amp) |
Warranty and Support
This Greenworks 60V 20" Brushless Cordless Pole Hedge Trimmer (Model PH60L210) is backed by a 4-year limited tool and battery warranty. This warranty covers defects in materials and workmanship from the date of purchase.
For warranty claims, technical support, or to order replacement parts, please contact Greenworks customer service. Keep your proof of purchase for warranty validation.
Greenworks Customer Service:
- Refer to the Greenworks official website for the most current contact information.
- Online support resources may also be available.
Image: The Greenworks logo indicating a 4-year warranty for both the tool and battery.
