Wet Sounds JEEP-JL-LVL1-C Jeep Wrangler Core Audio Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Wet Sounds JEEP-JL-LVL1-C Jeep Wrangler Core Audio Kit. This comprehensive audio system is designed to integrate seamlessly into your 2018-2023 Jeep Wrangler, enhancing your in-vehicle sound experience. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your audio system.

Image 1.1: Overview of the Wet Sounds JEEP-JL-LVL1-C Core Audio Kit components.

2. Safety Information

Adhering to these safety guidelines is crucial for your safety and the proper functioning of the audio system:

• Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or damage.
• Ensure all wiring connections are secure and properly insulated to prevent short circuits and potential fire hazards.
• Do not operate the audio system at excessively high volumes for prolonged periods, as this may cause permanent hearing damage.
• Consult a professional installer if you are unsure about any part of the installation process. Improper installation can lead to damage to the product or vehicle.
• This kit is designed for specific Jeep Wrangler models (2018-2023). While individual components may be water-resistant, the overall kit is not fully waterproof. Avoid direct exposure to water and extreme environmental conditions.

3. Package Contents

Carefully unpack your Wet Sounds JEEP-JL-LVL1-C Core Audio Kit and verify that all components listed below are present:

• 1x JEEP-JL-FSK: JEEP JL Front Speaker, Enclosure and Harness (2018-2023)
• 1x JEEP-JL-RSK: JEEP JL Rear Speaker, Rear Mounting and Harness Kit (2018-2023)
• 1x JEEP-JL-MH: JEEP JL Interior Package Wiring Kit (2018-2023)
• 1x JEEP-JL-SEK: JEEP JL Sub Enclosure Kit (2018-2023)
• 1x JEEP-JL-SMK: JEEP JL Sub Mounting Kit (2018-2023)
• 2x ZERO 6 CS-B: ZERO 6 Black Component Set, Wet Sounds High Output Zero Series™ 6.5” Marine Component Speakers
• 2x ZERO 69 XZ-B: ZERO 69 XZ-B, Wet Sounds High Output Zero Series™ 6x9” Marine Coaxial Speakers - Black
• 2x ZERO 12 S2 XZ-B: ZERO 12 S2 XZ-B, Wet Sounds Zero Series™ 12” Sealed Enclosure Marine Subwoofer - Black
• 1x SYNDX6 DSP OE: Full Range Class-D 1400 Watt 6 CH Amplifier w/ OE connectors
• 1x WWX-FUSE DIST BLOCK: 4-Position ANL Fuse/Ground Block Combo

Image 3.1: Wet Sounds ZERO 12 S2 XZ-B Marine Subwoofers in their enclosures.

Image 3.2: Wet Sounds ZERO 6 CS-B Front Component Speakers.

Image 3.3: Wet Sounds ZERO 69 XZ-B Rear Coaxial Speakers.

4. Setup and Installation

The JEEP-JL-LVL1-C Core Audio Kit is engineered for a factory fit and finish, utilizing plug-and-play wiring harnesses to simplify the installation process. This kit is specifically designed for 2018-2023 Jeep Wrangler models.

4.1. General Installation Notes

• Compatibility: This kit is exclusively designed for 2018-2023 Jeep Wrangler models. Ensure your vehicle falls within this range.
• Wiring: The system features plug-and-play factory-style wiring harnesses. These connect directly to the speakers, amplifier, distribution block, and battery, significantly reducing the need for custom wire cutting and termination.
• Mounting: All mounting plates for speakers and the subwoofer enclosure are precisely engineered to fit into existing factory locations within your Jeep Wrangler.

4.2. Amplifier Installation (SYNDX6 DSP OE)

The SYNDX6 DSP OE amplifier is pre-tuned to deliver 1400 Watts of power to your audio system. It is designed for discreet mounting, typically under the subwoofer enclosure, utilizing pre-drilled locations on the sub mounting plate.

• Locate the designated mounting area for the amplifier, usually adjacent to or beneath the subwoofer enclosure.
• Secure the amplifier using the provided hardware, ensuring it is firmly attached.
• Connect the amplifier to the vehicle's power system via the WWX-FUSE DIST BLOCK and the included 100A mini ANL fuse. Ensure proper polarity.
• Connect the speaker harnesses from the JEEP-JL-MH interior package wiring kit to the corresponding amplifier outputs.

Image 4.1: SYNDX6 DSP OE Amplifier mounted discreetly within the vehicle.

4.3. Speaker and Subwoofer Installation

• Front Speakers (ZERO 6 CS-B): Install the 6.5” component speakers into the JEEP-JL-FSK front speaker enclosures and mount them securely in the factory front speaker locations.
• Rear Speakers (ZERO 69 XZ-B): Install the 6x9” coaxial speakers into the JEEP-JL-RSK rear mounting kit and mount them in the factory rear speaker locations.
• Subwoofers (ZERO 12 S2 XZ-B): Install the 12” sealed enclosure marine subwoofers into the JEEP-JL-SEK and JEEP-JL-SMK kits, securing them in the designated vehicle location, typically in the rear cargo area.

4.4. RGB Lighting Control

The RGB lighting feature for the speakers is integrated into the wiring harness. To control the lighting effects and colors, download and use the ZENGGE app, which is available on both Google Play for Android devices and the Apple App Store for iOS devices.

5. Operating Instructions

Once properly installed, your Wet Sounds audio system will operate in conjunction with your vehicle's existing head unit. The SYNDX6 DSP OE amplifier is pre-tuned for optimal sound performance, eliminating the need for complex manual adjustments.

5.1. Basic Operation

• Turn on your vehicle's ignition and head unit. The audio system will power on automatically with the head unit.
• Adjust volume, balance, and fader settings through your vehicle's head unit as you normally would.
• For RGB lighting control, launch the ZENGGE app on your smartphone and connect to the system.

5.2. Subwoofer Level Control

A dedicated subwoofer level control is included with your kit, providing convenient adjustment of the bass output directly from the driver's seat.

Image 5.1: Dedicated subwoofer level control unit for adjusting bass output.

6. Maintenance

To ensure the longevity and optimal performance of your Wet Sounds audio system, follow these general maintenance guidelines:

• Cleaning: Use a soft, damp cloth to gently clean speaker grilles and enclosures. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which can damage components.
• Connections: Periodically inspect all wiring connections to ensure they remain secure and free from corrosion. Loose connections can lead to intermittent sound or system failure.
• Environmental Protection: While individual components are designed with water resistance (IP65 rating for some), the complete kit is not fully waterproof. Protect the system from direct water exposure, extreme temperatures, and prolonged direct sunlight when possible.

7. Troubleshooting

If you encounter issues with your audio system, refer to the following common problems and their potential solutions:

If these troubleshooting steps do not resolve the issue, please contact Wet Sounds customer support for further assistance.

8. Specifications

Key technical specifications for the Wet Sounds JEEP-JL-LVL1-C Core Audio Kit:

9. Warranty and Support

Wet Sounds products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For detailed warranty information, including terms, conditions, and duration, please refer to the official Wet Sounds website or the warranty card included with your product. Always retain your proof of purchase for any warranty claims.

For technical support, installation assistance, or troubleshooting beyond what is covered in this manual, please visit the Wet Sounds Store on Amazon or their official website. You may also contact their customer service directly for personalized support.