Product Overview
This manual provides essential information for the proper use and care of your SIKAI CASE Silicone Protective Cover, designed specifically for the Anker Prime Power Bank 20,000mAh 200W. The case offers robust protection against dust and scratches, while enhancing functionality with integrated storage slots and a 1/4-inch screw hole for versatile mounting options.
Image: SIKAI CASE Silicone Case installed on an Anker Prime Power Bank.
Compatibility
This silicone case is precisely molded for a perfect fit with the Anker Prime 20,000mAh 200W Power Bank (Model A1336). Please verify your power bank model before installation to ensure proper fit and functionality. It is not compatible with other Anker Prime Power Bank models such as the 27,650mAh 250W, 24,000mAh 737, or 12,000mAh 130W versions.
Image: A compatibility chart illustrating that the SIKAI CASE is designed exclusively for the Anker Prime 20,000mAh 200W Power Bank, with other models marked as incompatible.
Key Features
- Enhanced Protection: Made from soft, dustproof silicone, this lightweight case provides robust protection against scratches, minor impacts, and daily wear without adding significant bulk.
- Flip-Open Design for Charging: The bottom part of the case features a detachable design, allowing you to easily unfold it for charging on a compatible charging base or fold it back for full protection.
- Integrated Storage: Equipped with dedicated slots for TF/SM cards and a SIM pin, ensuring your small accessories are always with your power bank.
- 1/4-inch Screw Hole: A built-in 1/4-inch screw hole allows for mounting the power bank on camera tripods or other compatible accessories, ideal for camera charging during time-lapse photography or live streaming.
- Unobstructed Access: Precision molding ensures all ports, buttons, and the display screen remain fully accessible and visible.
Image: The flip-open design of the silicone case, allowing the Anker Prime Power Bank to be placed on a charging base without removing the entire case.
Image: Close-up view highlighting the thick silicone material and ribbed texture designed for shock absorption and enhanced grip.
Image: A detailed view of the case's back, showing dedicated slots for TF/SIM cards, a SIM pin, and a 1/4-inch screw hole for mounting.
Image: The Anker Prime Power Bank, protected by the SIKAI CASE, is shown mounted on a camera tripod, demonstrating the utility of the 1/4-inch screw hole for photography setups.
Setup & Installation
To install the SIKAI CASE Silicone Cover onto your Anker Prime Power Bank 20,000mAh 200W, follow these steps:
- Ensure your power bank is clean and free of debris.
- Gently stretch the silicone case and slide the power bank into it, starting from one end.
- Align the cutouts for the screen, buttons, and ports carefully. The silicone is flexible, allowing for a snug fit.
- For charging on a base, locate the flip-open section at the bottom of the case and unfold it to expose the charging contacts.
Video: A demonstration of installing the SIKAI CASE Silicone Cover onto the Anker Prime Power Bank, highlighting the flexible material and precise fit.
Operating Instructions
Once installed, the SIKAI CASE allows full functionality of your Anker Prime Power Bank:
- Screen Visibility: The case is designed with a precise cutout to ensure the power bank's display screen is fully visible for monitoring charging status and other information.
- Port Access: All USB-C and USB-A ports are easily accessible for connecting your devices.
- Button Functionality: The power button and any other control buttons are covered by responsive silicone, allowing normal operation.
- Charging Base Compatibility: When using an Anker charging base, simply unfold the bottom flap of the silicone case to expose the power bank's charging contacts.
Image: The Anker Prime Power Bank in its SIKAI CASE, positioned on a charging base with the bottom flap of the case unfolded to allow charging.
Image: A person holding the Anker Prime Power Bank in its SIKAI CASE, showing the exposed bottom for easy inspection at airport security, ensuring compliance with travel regulations.
Maintenance & Care
To ensure the longevity and appearance of your SIKAI CASE Silicone Cover, please follow these maintenance guidelines:
- Cleaning: Wipe the silicone case with a damp cloth to remove dust or smudges. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the case in a cool, dry place away from direct sunlight or extreme temperatures to prevent material degradation.
- Avoid Sharp Objects: While durable, silicone can be punctured or cut by sharp objects. Handle with care to prevent damage.
Troubleshooting
- Case difficult to install/remove: The silicone is designed for a snug fit. Apply gentle, even pressure when installing or removing. Over time, the material may become slightly more flexible.
- Interference with charging base: Ensure the bottom flap of the case is fully unfolded and the power bank's charging contacts are completely exposed and making proper connection with the base.
- Screen visibility issues: Check that the power bank is correctly seated within the case and the screen cutout is perfectly aligned.
Specifications
| Product Dimensions | 5.1 x 2.36 x 2.36 inches |
| Item Weight | 3.2 ounces |
| Material | Silicone |
| Color | Gray |
| Special Feature | Lightweight, TF/SM card slot, SIM pin storage, 1/4-inch nut hole |
| Compatible Devices | Anker Prime Power Bank 20,000mAh 200W (Model A1336) |
Warranty & Support
Warranty and specific support information for the SIKAI CASE Silicone Cover is not provided in this manual. For details regarding warranty coverage, returns, or technical assistance, please refer to the official SIKAI CASE website or contact their customer support directly.
