Motobilt Steering Wheel Center Cap Instruction Manual

1. Introduction

Thank you for choosing the Motobilt Steering Wheel Center Cap. This precision-engineered accessory is designed to enhance the appearance of your vehicle's interior, specifically tailored for 5-bolt pattern Joe's Racing Steering Wheels. Crafted with quality and durability in mind, this center cap adds a distinctive detail to your steering system.

This manual provides essential information for the proper installation, care, and understanding of your new center cap. Please read it thoroughly before proceeding with installation or use.

2. Product Features

• Perfect Fit: Tailored specifically for 5-bolt pattern steering wheels used on Joe's Racing Steering Wheels.
• Proudly Made in the USA: Quality crafted in-house with laser-cut aluminum.
• Powder Coated Finish: Durable black powder coating for enhanced aesthetics and protection.
• Laser Etched Graphics: Features the Motobilt Classic Logo, with other graphic versions and a blank option available separately.
• Compact and Lightweight: Designed to add minimal weight and bulk to your steering system.

3. Installation Guide

The Motobilt Steering Wheel Center Cap is designed for straightforward installation. Please note that button head bolts are not included with this kit. Due to the variety of steering wheel options and adapters available, it is recommended that the installer source the specific hardware suitable for their application. A stainless button head bolt is recommended for optimal appearance.

3.1. Required Tools (Not Included)

• Appropriate size button head bolts (quantity of 5, suitable for your steering wheel's thread pitch and length).
• Hex key or wrench compatible with your chosen bolts.

3.2. Installation Steps

1. Ensure your vehicle's steering wheel is clean and free of debris.
2. Align the Motobilt Steering Wheel Center Cap with the 5 bolt holes on your Joe's Racing Steering Wheel.
3. Insert the appropriate button head bolts through the center cap and into the steering wheel's mounting points.
4. Hand-tighten all bolts initially to ensure proper alignment.
5. Using your hex key or wrench, gradually tighten each bolt in a star pattern to ensure even pressure and a secure fit. Do not overtighten.
6. Verify that the center cap is firmly seated and does not wobble.

Figure 1: Front view of the Motobilt Steering Wheel Center Cap with Classic Logo.

Figure 2: Another perspective of the Motobilt Steering Wheel Center Cap, highlighting its texture and bolt holes.

4. Operation

Once properly installed, the Motobilt Steering Wheel Center Cap functions as a static cosmetic and protective cover for the center of your steering wheel. It requires no active operation. Its primary purpose is to enhance the aesthetic appeal of your vehicle's interior and cover the steering wheel's central mounting area.

5. Maintenance and Care

To maintain the appearance and longevity of your Motobilt Steering Wheel Center Cap, follow these simple care instructions:

• Cleaning: Use a soft, damp cloth to wipe down the surface. For stubborn dirt, a mild automotive interior cleaner can be used. Avoid abrasive cleaners or harsh chemicals, as these may damage the powder-coated finish or laser-etched graphics.
• Inspection: Periodically check the mounting bolts to ensure they remain securely tightened. Vibrations from driving can sometimes cause bolts to loosen over time.
• Avoid Impact: While durable, direct impact or sharp objects can scratch or chip the finish.

6. Troubleshooting

This section addresses common issues you might encounter with your steering wheel center cap.

6.1. Center Cap Feels Loose After Installation

• Cause: Bolts may not be sufficiently tightened, or an incorrect bolt size/type was used.
• Solution: Re-check all mounting bolts and tighten them evenly in a star pattern. Ensure the bolts are the correct length and thread pitch for your steering wheel. If the issue persists, consult with a professional installer.

6.2. Scratches or Damage to Finish

• Cause: Accidental impact, abrasive cleaning, or contact with sharp objects.
• Solution: Minor scratches on the powder coat may be touched up with a suitable black automotive paint pen. For significant damage, replacement of the center cap may be necessary.

7. Specifications

8. Support and Contact

For further assistance, technical support, or inquiries regarding your Motobilt Steering Wheel Center Cap, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.

Manufacturer: Motobilt

Seller: Baja Racing Supply (as per product listing)

Please have your product model number (MTB-MB2182) and purchase date ready when contacting support.