1. Product Overview
The CLATINA Cynthia Leather Home Office Desk Chair is designed for comfort and functionality in various settings, including home offices, studies, and bedrooms. It features a mid-back design, upholstered leather, golden legs, and swivel wheels for smooth movement.
Image: Front view of the CLATINA Cynthia Leather Home Office Desk Chair, showcasing its green upholstery and golden metal frame.
2. Setup and Assembly
Your CLATINA Cynthia chair includes all necessary components and instructions for assembly. Please follow the provided assembly guide carefully to ensure proper setup.
- Unpack all components and verify against the parts list in the separate assembly instructions.
- Assemble the chair base, including the casters (wheels) and gas lift cylinder.
- Attach the seat and backrest components as directed.
- Secure the armrests to the chair.
For visual guidance on assembly and features, please refer to the video below:
Video: Demonstrates the assembly process and key adjustable features of the CLATINA Leather Home Office Desk Chair, including height adjustment and tilt functionality.
Image: The CLATINA Cynthia chair positioned in a modern home office environment.
3. Operating Instructions
The CLATINA Cynthia chair offers several adjustable features to enhance your comfort and support.
- Adjustable Height: Use the lever located under the seat to adjust the chair's height. Pull the lever up while seated to lower the chair, or pull it up while standing to raise it. Release the lever at your desired height. The seat height is adjustable from approximately 37 to 40 inches.
- Tilt Function: The chair features a tilt mechanism allowing the backrest to recline. Use the lever (often the same as the height adjustment lever, or a separate one) to unlock the tilt. Lean back to recline and push the lever back in to lock the chair in an upright or reclined position. The tilt range is typically between 90 and 105 degrees.
- 360-Degree Swivel and Movement: The chair's seat and wheels allow for full 360-degree rotation and smooth movement across various floor surfaces without scratching.
Image: A diagram illustrating the relaxing reclining feature of the chair, showing a tilt range from 90 to 105 degrees.
Image: An infographic detailing the ergonomic design elements of the chair, such as double-layer lumbar support, padded armrests, and thickened cushion.
4. Maintenance
To ensure the longevity and appearance of your CLATINA Cynthia chair, follow these maintenance guidelines:
- Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the leather.
- Leather Care: The high-quality leather is wear-resistant, waterproof, and scratch-resistant. For best results, periodically wipe the surface to remove dust and spills.
- Caster Maintenance: Regularly check the wheels for any accumulated debris (hair, dust) that might hinder smooth movement. Clean as needed.
- Hardware Check: Periodically inspect all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
Image: A detailed view of the chair's high-density thickened cushion, illustrating its construction with elastic sponge and high-density PU leather for comfort.
5. Troubleshooting
If you encounter any issues with your CLATINA Cynthia chair, consider the following common solutions:
- Difficulty with Assembly: Ensure all parts are correctly oriented and aligned before tightening screws. Some steps may require slight pressure to fit components together. Refer to the assembly instructions for detailed diagrams.
- Chair Not Adjusting Height: Check if the gas lift lever is fully engaged or disengaged. Ensure there are no obstructions preventing the gas lift from functioning.
- Wheels Not Rolling Smoothly: Inspect the casters for any hair, dust, or debris that may be caught in them. Clean the wheels thoroughly. Ensure the chair is on a suitable surface (hard floor recommended).
- Chair Feels Unstable: Verify that all screws and bolts are securely tightened. If the issue persists, re-check the assembly steps.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | CLATINA |
| Model Name | Cynthia |
| Color | Green |
| Product Dimensions | 23.61"D x 19.68"W x 40.55"H |
| Maximum Weight Recommendation | 350 Pounds |
| Material | Metal (Frame), Foam (Fill), Leather (Furniture Finish) |
| Special Features | Adjustable Height, Cushion Availability, Ergonomic, Upholstered Leather, Padded Armrests |
| Back Style | Open Back |
| Tilting | Yes (2 Reclining Positions) |
| Product Care Instructions | Wipe Clean |
| Surface Recommendation | Hard Floor |
Image: A graphic displaying the detailed dimensions and maximum weight capacity of the CLATINA Cynthia chair.
7. Warranty and Support
CLATINA offers a standard return policy of 30 days from the date of purchase. For specific warranty details, claims, or further support, please contact CLATINA customer service directly. Contact information can typically be found on the product packaging or the official CLATINA website.
