LiTime L12V100-100-OBM-BT-4-A100
Contents
LiTime 12V 100Ah Electric Outboard Motor LiFePO4 Battery User Manual
Model: L12V100-100-OBM-BT-4-A100
1. Introduction
This manual provides essential information for the safe and efficient use of your LiTime 12V 100Ah LiFePO4 Battery. This battery is specifically designed for electric outboard motors, trolling motors, and other marine applications, offering high capacity, long cycle life, and integrated low-temperature protection. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your battery.

Image 1.1: LiTime 12V 100Ah LiFePO4 Battery with Bluetooth monitoring capabilities.
2. Safety Information
Always adhere to safety guidelines when handling and operating batteries. Failure to do so may result in injury or damage to equipment.
- Do not short-circuit the battery terminals.
- Do not immerse the battery in water or expose it to excessive moisture.
- Avoid dropping, puncturing, or crushing the battery.
- Use only compatible chargers designed for LiFePO4 batteries.
- Ensure proper ventilation during charging and operation.
- Keep the battery away from heat sources, open flames, and flammable materials.
- Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling the battery.
- This battery is for energy storage applications only. It is not suitable for starting batteries, golf carts, or jacks.

Image 2.1: The battery adheres to ABYC-compliant installation standards for marine safety.
3. Product Overview
3.1 Key Features
- High Discharge Capability: Designed for electric outboard motors, handling 500A/1S surges and 1.5C continuous discharge for 3 minutes.
- Scalable Power: Supports up to 5P5S configuration for a maximum output of 32kWh, powering motors up to 51HP.
- Bluetooth Connectivity: Monitor voltage, current, and battery health in real-time via a smartphone application.
- Smart Low-Temperature Protection: Automatically stops charging below 0°C (32°F) and stops discharging below -20°C (-4°F) to prevent damage and extend lifespan.
- Durability: EV-grade cells provide 4,000 to 15,000 deep cycles, lasting over 10 years. IP65 waterproof and dustproof rating ensures resilience in harsh marine environments.
- Integrated BMS: Built-in 100A Battery Management System protects against over-charge, over-discharge, over-current, over-temperature, low-temperature, and short-circuit conditions.
3.2 What's in the Box
- 1 x LiTime 12V 100Ah Bluetooth OBM LiFePO4 Battery
- 1 x Quick Start Guide
- 1 x Product Manual
- 2 x Terminal Posts
- 2 x Isolation Caps
- 2 x Gaskets

Image 3.1: Included items in the product package.
4. Specifications
| Specification | Value |
|---|---|
| Brand | LiTime |
| Model | L12V100-100-OBM-BT-4-A100 |
| Nominal Voltage | 12V |
| Capacity | 100Ah |
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Built-in BMS | 100A |
| Max. Continuous Discharge Current | 100A |
| Peak Discharge Current | 500A (1 second) |
| Low Temperature Protection | Charging Off < 0°C (32°F), Discharging Off < -20°C (-4°F) |
| Cycle Life | 4,000-15,000 cycles |
| Lifespan | 10+ years |
| Waterproof Rating | IP65 |
| Dimensions (L x W x H) | 13 x 6.77 x 8.5 inches |
| Weight | 22.6 pounds |
| Terminal Type | M8 |
5. Setup & Installation
5.1 Initial Activation
Before first use or after the battery has been switched off, activate the Bluetooth function by charging the battery with a lithium-activation or MPPT charger. This step is crucial for the battery to become operational and for Bluetooth connectivity.
5.2 Connecting Batteries (Series-Parallel)
The LiTime 12V 100Ah battery supports series and parallel connections for increased voltage or capacity. For series-parallel connections, all batteries must be identical (same brand, type, voltage, capacity, and BMS) and purchased within one month to ensure balanced performance and safety. The battery supports up to a 5P5S setup.

Image 5.1: Example of a LiTime battery connected to an electric outboard motor, demonstrating a potential setup for increased thrust.
5.3 Terminal Connections
When attaching ring terminals (OT terminals) directly with screws, ensure that the thickness of the terminals is less than 2mm. Always add gaskets for a secure lock attachment to prevent loosening and overheating. Ensure all connections are tight and secure to prevent arcing and ensure efficient power transfer.

Image 5.2: Illustration of correct terminal attachment using gaskets to prevent loosening and overheating.
6. Operating Instructions
6.1 Bluetooth App Monitoring
The LiTime battery features integrated Bluetooth 5.0, allowing you to monitor its status in real-time using a dedicated smartphone application. Download the LiTime app from your device's app store. Once installed, open the app, and it will automatically connect to your battery (after initial activation). You can view critical data such as voltage, current, State of Charge (SOC), temperature, and remaining capacity.
- Real-time SOC: View the current charge level.
- Power Status: Monitor charge/discharge/idle state.
- Voltage & Current: See live electrical readings.
- Temperature: Track battery temperature for optimal performance.
- Life Cycles: Keep track of battery usage.

Image 6.1: Monitoring battery status in real-time using the LiTime Bluetooth app.
6.2 Low-Temperature Protection
The battery's intelligent BMS includes low-temperature protection to safeguard the cells and extend their lifespan:
- Charging Cut-off: Charging will automatically stop when the battery temperature drops below 0°C (32°F). Charging will resume when the temperature rises above 5°C (41°F).
- Discharging Cut-off: Discharging will automatically stop when the battery temperature drops below -20°C (-4°F).
This feature prevents irreversible damage to the battery cells that can occur when charging or discharging at extreme cold temperatures.

Image 6.2: Visual representation of the battery's low-temperature protection thresholds for charging and discharging.
6.3 Motor Compatibility
The LiTime 12V 100Ah LiFePO4 battery is compatible with a wide range of electric outboard motors and trolling motors, including brands like Orqeedo, ePropulsion, Yamaha, and Mercury. It supports 24V-60V electric outboard motors (Max. 5S) and 30-70lb trolling motors. It is also suitable for powering 12V fishing electronics.

Image 6.3: The LiTime battery provides power for various electric boat applications, including trolling motors and fishing electronics.
7. Charging
To charge your LiTime 12V 100Ah LiFePO4 battery, use a compatible LiFePO4 charger. Recommended charging methods include:
- LiFePO4 Charger: A 14.6V 20A LiFePO4 charger can fully charge the battery in approximately 5 hours.
- Solar Panel + MPPT Controller: A solar panel with a minimum output of 400W on a sunny day, connected via an MPPT charge controller, can also charge the battery.
- Alternator + 40A DC-DC Charger: Charging from a vehicle alternator with a 40A DC-DC charger takes approximately 2.5 hours.
- Generator + 14.6V 20A Charger: A generator combined with a 14.6V 20A charger can charge the battery in about 5 hours.
Always ensure the charger's voltage and current settings are appropriate for LiFePO4 batteries to prevent damage.

Image 7.1: Different methods for charging the LiTime LiFePO4 battery, including dedicated chargers, solar, alternator, and generator setups.
8. Maintenance
Proper maintenance ensures the longevity and performance of your LiTime battery.
- Regular Inspection: Periodically check battery terminals for corrosion or loose connections. Clean terminals as needed.
- Storage: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC) and stored in a cool, dry place. Avoid extreme temperatures.
- Cleaning: The IP65 rating indicates protection against dust and water jets. Clean the battery exterior with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Self-Discharge: LiFePO4 batteries have a low self-discharge rate (approximately ≤ 2% per month), minimizing capacity loss during storage.

Image 8.1: The battery's IP65 rating ensures protection against water and dust, making it suitable for marine environments.
9. Troubleshooting
If you encounter issues with your LiTime battery, refer to the following common troubleshooting steps:
- Battery Not Activating: Ensure the battery has been charged with a lithium-activation/MPPT charger for initial activation.
- No Power Output: Check all cable connections for tightness and proper polarity. Verify that the battery is sufficiently charged. The BMS may have triggered a protection mode (e.g., low voltage, over-current).
- Bluetooth Connectivity Issues: Ensure the battery is activated and within range of your smartphone. Restart the app and your phone's Bluetooth.
- Charging Stops Unexpectedly: Check the battery temperature. If it's below 0°C (32°F), the low-temperature charging protection is active. Charging will resume when the temperature rises.
- Reduced Performance: Ensure the battery is fully charged. Check for any error codes or warnings in the Bluetooth app.
For persistent issues or advanced troubleshooting, please contact LiTime customer support.
10. Warranty & Support
LiTime offers a 5-year service warranty for this product. For any technical assistance, warranty claims, or support inquiries, please contact LiTime customer service. Our team provides 24-hour prompt response and has over 10 years of expertise in RV and off-grid power solutions.
- Customer Service: Refer to the contact information provided in your Quick Start Guide or on the official LiTime website.
- Local Warehouses: LiTime maintains local warehouses in the US for efficient service and support.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.