OCOOPA IP56 Waterproof Rechargeable Hand Warmer (Model UT3201) Instruction Manual

Introduction

Thank you for choosing the OCOOPA IP56 Waterproof Rechargeable Hand Warmer. This device is engineered for durability and performance in challenging outdoor conditions, providing warmth, portable power, and illumination. It features a robust 10,000mAh battery, multiple heat settings including an extra heat mode, a built-in flashlight, and power bank functionality. This manual provides essential information for safe and effective use of your hand warmer.

Image: The OCOOPA IP56 Waterproof Rechargeable Hand Warmer, showcasing its water-resistant design with water splashing over its black, rugged exterior. A wrist strap is attached.

Package Contents

Please ensure all items are present in your package:

• 1 x OCOOPA 10000mAh Hand Warmer (Model UT3201)
• 1 x Flannel Bag
• 1 x USB-C Charging Cable
• 1 x User Manual
• 1 x Wrist Strap

Image: The OCOOPA UT4 Extreme hand warmer, its packaging, flannel bag, USB cable, user manual, and wrist strap are neatly arranged on a wooden surface.

Setup

Initial Charging

Before first use, fully charge your OCOOPA Hand Warmer. Connect the provided USB-C cable to the device's charging port and to a compatible USB power adapter (not included). The LED indicators will show charging progress. A full charge typically takes approximately 3 hours with a 9V 2A adapter or 6 hours with a 5V 2A adapter.

Image: The OCOOPA hand warmer connected via a USB-C cable, with text indicating 18W quick recharging and charging times for different adapters.

Attaching the Wrist Strap

Thread the included wrist strap through the designated loop on the hand warmer. This provides a secure way to carry the device and prevents accidental drops, especially during outdoor activities.

Operating Instructions

Power On/Off & Heat Settings

1. To Power On: Long press the main power button (located on the front surface) for 3 seconds. The LED indicators will light up, and the device will begin heating on the lowest setting.
2. To Adjust Heat Level: Short press the main power button to cycle through the 3 standard heat settings:
   • Level 1 (Gentle): Approximately 37-42°C (99-108°F) - Up to 16 hours of warmth.
   • Level 2 (Medium): Approximately 43-47°C (109-117°F) - Up to 12 hours of warmth.
   • Level 3 (High): Approximately 48-53°C (118-127°F) - Up to 9 hours of warmth.
3. Extra Heat Mode: Long press the side button (marked with a rocket icon) to activate the extra heat mode. This provides a burst of heat up to 58°C (137°F) and warms up 40% faster, lasting up to 6 hours. This mode is ideal for extremely cold conditions.
4. To Power Off: Long press the main power button for 3 seconds until the LED indicators turn off.

Image: A person hiking in a mountainous landscape, with an inset showing the hand warmer's side button for activating the extra heat mode, which offers 40% faster heating.

Image: A hand holding the OCOOPA hand warmer, displaying the various heat settings (Gentle, Medium, High, Extra Heat Mode) and their corresponding battery life durations (16hrs, 12hrs, 9hrs, 6hrs).

Flashlight Function

The hand warmer includes a built-in flashlight for convenience and emergencies.

• To Turn On/Off: Short press the side button (marked with a rocket icon) to activate the flashlight. Short press again to cycle through modes: steady light, strobe (SOS), and off.

Video: A seller demonstrating the OCOOPA hand warmer's features, including the flashlight function and heat settings. The video highlights its utility in various outdoor scenarios.

Power Bank Function

Utilize the hand warmer's 10,000mAh battery to charge your other electronic devices.

• To Charge External Devices: Open the protective flap on the side to reveal the USB-A output port and USB-C input/output port. Connect your device using an appropriate charging cable. The hand warmer supports PD & QC fast charging, delivering up to 22.5W output.
• Battery Level Indicator: Double-click the main power button to check the current battery level via the blue LED indicators.

Image: The OCOOPA hand warmer connected to and charging an iPhone, an iPad, and a drone, emphasizing its 22.5W fast charging power bank feature.

Video: A seller providing a detailed review and live demo of the OCOOPA IP56 Waterproof Hand Warmer, showcasing its various functions including the power bank feature and different heat settings.

Maintenance

Cleaning

Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the charging port cover is securely closed before cleaning or exposing to water.

Storage

Store the hand warmer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the device to approximately 50% every 3 months to maintain battery health.

Troubleshooting

• Device not heating: Ensure the device is powered on and has sufficient battery charge. Cycle through heat settings to confirm functionality.
• Device not charging: Check the USB-C cable and power adapter for damage. Ensure the cable is securely connected to both the hand warmer and the power source.
• Flashlight not working: Ensure the device is powered on and the side button is pressed correctly to activate the flashlight.
• External device not charging: Verify the hand warmer has enough battery. Ensure the charging cable for the external device is functional and correctly connected to the hand warmer's output port.

Specifications

Warranty and Support

The OCOOPA IP56 Waterproof Rechargeable Hand Warmer comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or any inquiries, please refer to the contact information provided in the included User Manual or visit the official OCOOPA website.

The product is UL certified for safety (UL File Number: E535516), ensuring high quality and reliability.