Introduction
Thank you for choosing the GeyouLux 24W 3CCT LED Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new wall light. Please read these instructions carefully before use and retain them for future reference.
This versatile LED wall light is designed for both indoor and outdoor use, featuring an IP65 waterproof rating, adjustable beam angles, and three selectable color temperatures. The integrated motion sensor enhances energy efficiency and convenience.
Safety Instructions
- Always disconnect power at the main circuit breaker before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with all local electrical codes and regulations.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
- Avoid looking directly into the LED light source when it is illuminated, as this may cause eye strain.
- The IP65 rating ensures protection against dust and low-pressure water jets. Do not submerge the fixture in water.
Product Components
Please check that all components are present before installation:
- GeyouLux 24W 3CCT LED Wall Light (Model GE-506)
- Mounting Bracket
- Screws and Wall Plugs
- User Manual
Specifications
| Parameter | Value |
|---|---|
| Brand | GeyouLux |
| Model | GE-506 |
| Power Consumption | 24W |
| LED Quantity | 192 LEDs |
| Luminous Flux | 3500LM |
| Color Temperature (CCT) | 3000K (Warm White), 4000K (Neutral White), 6000K (Cold White) - Adjustable |
| Material | Aluminum |
| Waterproof Rating | IP65 |
| Motion Sensor Range | 3-10 meters |
| Motion Sensor Timer | 5 seconds - 12 minutes (adjustable) |
| Beam Angle Adjustment | 240° Vertical, 60° Left/Right Horizontal |
| Color Rendering Index (CRI) | >80 |
| Dimensions (approx.) | 17cm (W) x 12.3cm (D) x 17.5cm (H) |
For detailed product data, refer to the official EU EPREL database: https://eprel.ec.europa.eu/qr/2044218
Image: Product dimensions and key specifications including material, LED count, power, and CCT.
Image: EU Energy Label for GeyouLux GE-506, showing energy efficiency class E and 24 kWh/1000h consumption.
Setup and Installation
This section provides general guidance. Professional installation is recommended.
- Preparation: Ensure the power supply to the installation area is turned off at the circuit breaker. Gather necessary tools (screwdriver, drill, wire strippers, etc.).
- Mounting Location: Choose a suitable location on a wall, ensuring it is flat and stable. Consider the desired light coverage and motion sensor range.
- Install Mounting Bracket: Use the mounting bracket as a template to mark drilling points on the wall. Drill holes and insert wall plugs. Secure the mounting bracket to the wall with screws.
- Electrical Connection: Connect the household electrical wires to the corresponding terminals on the light fixture. Ensure proper polarity (Live, Neutral, Ground) as per local wiring codes. Use appropriate waterproof connectors if installing outdoors.
- Attach Fixture: Carefully attach the light fixture to the mounting bracket, ensuring all wires are securely tucked away and not pinched. Secure the fixture with any provided screws or fasteners.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: Examples of the GeyouLux wall light installed on exterior walls, patios, and indoor stairwells, demonstrating its versatile application.
Operating Instructions
1. Motion Sensor Settings
The wall light features an adjustable motion sensor with two main settings:
- Time Adjustment: This dial controls how long the light stays on after motion is detected. You can set the duration from 5 seconds to 12 minutes. Rotate the dial towards the '+' symbol for a longer duration, and towards '-' for a shorter duration.
- Light-sensitive Setting (LUX): This dial determines the ambient light level at which the motion sensor becomes active. Rotate towards the 'sun' symbol for the light to operate both day and night. Rotate towards the 'moon' symbol for the light to operate only at night or in darkness.
2. Operating Modes
The light supports two operating modes:
- Motion Sensor Mode: In this default mode, the light automatically turns on when motion is detected within its range (3-10 meters) and turns off after the set time delay once no further motion is detected.
- Always-on Mode: To activate this mode, quickly press the wall switch twice consecutively within 2 seconds (OFF-ON-OFF-ON). The wall light will blink 3 times to confirm entry into the always-on mode. To exit this mode and return to motion sensor mode, simply turn the light off and then on again normally.
Image: Illustration of the motion sensor's 3-10 meter detection range and 120° angle, along with detailed views of the time and light-sensitive adjustment dials and explanations of the motion sensor and always-on modes.
3. Color Temperature Adjustment
The light offers three color temperature options (3000K, 4000K, 6000K) to suit different preferences and environments. This setting is typically adjusted during installation of the back panel using a dedicated switch or rotary wheel.
- 3000K Warm White: Provides a cozy and inviting ambiance.
- 4000K Neutral White: Offers a balanced and natural light, suitable for general illumination.
- 6000K Cold White: Delivers a bright and crisp light, ideal for task lighting or modern aesthetics.
Image: Visual representation of the three adjustable color temperatures (3000K Warm White, 4000K Neutral White, 6000K Cold White) and the location of the color temperature selection button.
4. Beam Angle Adjustment
The light fixture allows for flexible adjustment of the light beam direction:
- Vertical Rotation: The light panel can be rotated up to 240° vertically.
- Horizontal Rotation: The light panel can be rotated up to 60° to the left and right horizontally.
Adjust the light panel manually to achieve your desired illumination angle.
Image: Illustrations demonstrating the 240° vertical and 60° left and right horizontal rotation capabilities of the light panel, allowing for precise beam angle adjustment.
Maintenance
To ensure the longevity and optimal performance of your GeyouLux LED Wall Light, follow these simple maintenance guidelines:
- Cleaning: Periodically clean the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Regularly inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
- No User-Serviceable Parts: The LED light source is integrated and not replaceable by the user. Do not attempt to open the fixture.
Image: Demonstrates the IP65 waterproof rating and the fixture's resistance to both heat and cold, highlighting its durability in various weather conditions.
Troubleshooting
If you encounter issues with your GeyouLux LED Wall Light, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Motion sensor settings incorrect. Ambient light too high (LUX setting). | Check circuit breaker and wiring connections. Adjust motion sensor 'Time' and 'LUX' dials. Ensure 'LUX' setting is appropriate for desired operation (e.g., 'moon' for night-only). |
| Light stays on continuously. | Always-on mode activated. Constant motion detected. Motion sensor faulty. | Turn the light off and on normally to exit always-on mode. Adjust sensor position or sensitivity to avoid unwanted triggers. Contact customer support if the issue persists. |
| Light flickers or makes noise. | Loose wiring connection. Incompatible dimmer switch (not designed for dimming). Product defect. | Ensure all electrical connections are secure (power off first). This product is designed for stable light output with no flickering or noise. If this occurs, contact customer support. |
Image: Illustrates the product's features of no flickering and no noise, ensuring a stable light source for eye protection.
Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. GeyouLux is committed to providing quality products and customer satisfaction.
For technical support, product inquiries, or assistance with installation, please contact GeyouLux customer service through the retailer's platform or the official GeyouLux website.