1. Introduction
This manual provides detailed instructions for installing and operating your BRIKSMAX LED Light Kit, specifically designed to enhance the LEGO The Crafting Table (21265) building set. This light kit is intended to illuminate your LEGO model, bringing it to life with vibrant lighting effects. Please note that the LEGO building set is not included with this light kit.
Image 1.1: The BRIKSMAX Light Kit illuminating the LEGO The Crafting Table (21265) model.
2. Package Contents
Before beginning installation, please verify that all components listed below are present in your package. If any items are missing or damaged, please contact customer support.
- LED Light Kit components
- Instruction Manual
- USB Power Cable
Image 2.1: Overview of the BRIKSMAX Light Kit package contents.
3. Setup and Installation
Follow these step-by-step instructions to install the BRIKSMAX Light Kit into your LEGO The Crafting Table (21265) set. It is recommended to have your LEGO set fully assembled before starting the light kit installation.
- Prepare Your LEGO Model: Ensure your LEGO The Crafting Table (21265) model is complete and stable. Some steps may require temporary disassembly of small sections to properly route wires and place lights.
- Refer to the Included Instructions: A detailed, step-by-step instruction guide is provided within the package. This guide will illustrate the precise placement of each LED light and the routing of wires to ensure a clean and integrated look.
- Connect the Lights: Carefully connect the LED light components according to the instruction manual. Pay close attention to the orientation of connectors to avoid damage.
- Route Wires: Neatly tuck and route all wires between LEGO bricks to conceal them as much as possible. This helps maintain the aesthetic integrity of your model.
- Power Connection: Connect the USB power cable to the main control board of the light kit. The kit is USB powered, requiring a 5V DC power source (e.g., a USB wall adapter, power bank, or computer USB port).
Important Note:
- This light kit is designed for the LEGO 21265 set. Ensure your LEGO set is complete before installation, as the light kit does not include additional LEGO bricks.
- Some users have reported needing specific clear or tinted studs for optimal light diffusion, which are not included in the light kit.
Video 3.1: Official BRIKSMAX installation guide for the LEGO The Crafting Table 21265 light kit.
4. Operating Instructions
Once installed, operating your BRIKSMAX Light Kit is straightforward.
- Power On: Connect the USB cable to a compatible 5V DC power source. The lights should illuminate automatically.
- Power Off: Disconnect the USB cable from the power source to turn off the lights.
The light kit is designed to bring your LEGO model to life, highlighting its details and creating an immersive display. The various lights are strategically placed to enhance different elements of The Crafting Table.
Image 4.1: The LEGO The Crafting Table (21265) with the BRIKSMAX Light Kit in 'On' and 'Off' states.
5. Maintenance
To ensure the longevity and optimal performance of your BRIKSMAX Light Kit, follow these maintenance guidelines:
- Cleaning: Gently dust the LED lights and wires with a soft, dry cloth. Avoid using liquid cleaners directly on the electrical components.
- Handling: Handle the wired connections with care to prevent damage. Avoid excessive bending or pulling of wires.
- Storage: If disassembling the light kit for storage, carefully coil wires and store components in a dry, dust-free environment.
6. Troubleshooting
If you encounter any issues with your BRIKSMAX Light Kit, please refer to the following common problems and solutions:
- Lights Not Turning On:
- Ensure the USB cable is securely connected to both the light kit's control board and a functioning 5V DC power source.
- Test the power source with another device to confirm it is supplying power.
- Check for any loose connections between the individual light components and the main control board.
- Flickering Lights:
- This can indicate a loose connection. Inspect all wire connections and ensure they are firmly seated.
- Ensure the power source provides stable power. Try a different USB power adapter.
- Missing or Incorrect Parts:
- If you believe parts of the light kit are missing or incorrect, please refer to the package contents list (Section 2) and contact BRIKSMAX customer service immediately.
- Note that the light kit does not include any LEGO bricks; it is designed to be added to an existing LEGO 21265 set.
If these steps do not resolve the issue, please contact BRIKSMAX customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | BRIKSMAX |
| Model Number | 21265 (Compatible with LEGO The Crafting Table) |
| Light Source Type | LED |
| Power Source | USB Powered |
| Voltage | 5 Volts (DC) |
| Material | Plastic |
| Item Weight | 7.4 ounces (210 Grams) |
| Product Dimensions | 6.5 x 4.72 x 1.57 inches |
| Manufacturer Recommended Age | 8 years and up |
8. Warranty Information
BRIKSMAX offers a 3-year spare part availability duration for this product within the EU. For specific warranty details and claims outside the EU, please refer to the information provided at the time of purchase or contact customer support.
9. Customer Support
For any questions, technical assistance, or support regarding your BRIKSMAX Light Kit, please do not hesitate to contact our customer service team. We are committed to providing high-quality products and excellent service.
You can typically find contact information on the product packaging, the BRIKSMAX official website, or through your purchase platform.
