PELONIS 23-Inch 1500W PTC Tower Space Heater Instruction Manual

Introduction

Thank you for choosing the PELONIS 23-Inch 1500W PTC Tower Space Heater. This portable electric heater is designed for indoor use, providing efficient and comfortable warmth with advanced safety features. It features a 1500W PTC fan heater, remote control, programmable thermostat, and 70° oscillation to distribute heat effectively.

Important Safety Information

Please read and understand all safety instructions before using this heater. Failure to do so may result in electric shock, fire, or serious injury.

• Overheating Protection: The heater is equipped with an automatic shut-off feature that activates if the unit overheats.
• Tip-Over Protection: For enhanced safety, the heater will automatically turn off if it is accidentally tipped over.
• Flame Resistant Material: Constructed from high-quality, cool-touch flame-resistant material for added safety.
• Power Connection: Ensure the heater is plugged directly into a US standard outlet without any adapters or extension cords.
• Clearance: Maintain adequate clearance around the heater to prevent obstruction of air intake and exhaust.
• Supervision: Do not leave the heater unattended, especially around children or pets.

Product Overview

The PELONIS Tower Space Heater combines a sleek design with user-friendly controls for optimal comfort.

Components

• Main Unit: The tower-shaped heater housing the PTC ceramic heating elements and fan.
• Control Panel: Located on the top of the unit for manual operation.
• Remote Control: Allows convenient operation from a distance.
• Power Cord: Integrated power cord for electrical connection.
• Carry Handle: Integrated handle for easy portability.

Control Panel & Remote Functions

• Power Button: Turns the heater ON/OFF.
• Mode/Heat Settings: Cycles through High, Low, and ECO modes.
• Temperature Adjustment: Increases or decreases the target temperature.
• Oscillation (OSC) Button: Activates or deactivates the 70° oscillation function.
• Timer Button: Sets the auto-off timer (up to 8 hours).
• LED Display: Shows current settings and ambient temperature.

Setup

1. Unpack: Carefully remove the heater from its packaging and ensure all components are present.
2. Placement: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, curtains, or other combustible materials.
3. Power Connection: Plug the power cord directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.

Operating Instructions

Turning On/Off

• Press the Power button on the control panel or remote control to turn the heater ON.
• Press the Power button again to turn the heater OFF. The fan may continue to run for a short period to cool down the heating elements.

Selecting Heat Mode

• Press the Heater button to cycle through the available heat modes:
• High (1500W): Provides maximum heat output.
• Low (900W): Provides moderate heat output.
• ECO Mode: Automatically adjusts power consumption based on the ambient temperature to maintain your set temperature and save energy.

Setting Temperature

• In High or Low mode, use the Temperature Up (+) or Temperature Down (-) buttons to set your desired room temperature. The heater will cycle ON/OFF to maintain this temperature.
• The maximum temperature setting is 70°F (21°C).

Oscillation Function

• Press the OSC button to activate the 70° wide oscillation, distributing heat across a wider area.
• Press the OSC button again to stop oscillation.

Setting the Timer

• Press the Timer button to set the auto-off timer. Each press will increase the timer setting by 1 hour, up to a maximum of 8 hours.
• The LED display will show the remaining time before the heater automatically turns off.

Maintenance

Cleaning

• Always unplug the heater and allow it to cool completely before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
• Use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles.
• Do not immerse the heater in water or allow water to drip into the interior.

Storage

• Store the heater in its original packaging in a cool, dry place when not in use.
• Ensure the power cord is neatly wrapped and secured to prevent damage.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact PELONIS customer service. Keep your proof of purchase for any warranty claims.