1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your vidaXL TV Stand on Wheels, model 379577. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the product:
- Do not exceed the maximum load capacity of 50 kg (110.2 lb) for the TV mount and 15 kg for the shelf.
- Ensure all screws and bolts are securely tightened before use.
- Do not allow children to climb on or play with the TV stand.
- When moving the stand, ensure the TV is securely mounted and move slowly to prevent tipping. Lock the wheels once in position.
- Place the stand on a flat, stable surface.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support.
3. Package Contents
Verify that all components are present before beginning assembly. Refer to the assembly diagram for part identification.
- Main support columns
- Base with wheels
- TV mounting plate and hooks
- Adjustable shelf
- Assembly hardware (screws, washers, nuts, tools)
- Instruction manual
4. Assembly Instructions
Follow these steps carefully for proper assembly. Two people are recommended for certain steps, especially when mounting the TV.
4.1. Attach Wheels to Base
Secure the four lockable wheels to the base frame using the provided hardware. Ensure they are tightened for stability.
4.2. Assemble Support Columns
Connect the main support columns to the base. Ensure they are aligned correctly and secured with the designated bolts.
Image: Front view of the assembled stand without a TV.
4.3. Install Adjustable Shelf
Attach the adjustable shelf to the support columns at your desired height. The shelf can be repositioned later if needed.
Image: Detail of the adjustable shelf installation.
4.4. Attach TV Mounting Plate and Hooks
Secure the TV mounting plate to the top of the support columns. Then, attach the TV hooks to the back of your television, ensuring they align with the VESA mounting holes. Refer to your TV's manual for specific VESA patterns.
Image: Detail of the TV mounting plate and hooks.
4.5. Mount the TV
Carefully lift your TV and hook the attached TV hooks onto the mounting plate. Ensure the TV is level and securely seated. Tighten any safety screws or clips to prevent accidental dislodgement.
Image: Fully assembled vidaXL TV stand with a TV mounted.
5. Operating Instructions
5.1. Adjusting TV Height
The TV mounting plate offers 5 levels of height adjustment, allowing you to adjust the TV height by 10 cm increments. To adjust, loosen the securing bolts on the support columns, raise or lower the TV to the desired height, and re-tighten the bolts securely.
5.2. Tilting the TV
This TV stand features a tilt function, allowing you to tilt the screen +/-15° (up/down) to optimize viewing angles and reduce glare. Loosen the tilt adjustment knobs on the TV mounting plate, adjust the angle, and then re-tighten the knobs.
5.3. Adjusting Shelf Height
The accessory shelf can be adjusted to different heights along the support columns. Loosen the shelf's securing mechanism, slide it to the desired position, and re-secure it firmly.
Image: Visual guide for tilt, height, and shelf adjustments.
5.4. Moving the Stand
To move the TV stand, unlock all four wheels. Gently push the stand to its new location. Once in position, lock all four wheels to prevent accidental movement and ensure stability.
5.5. Cable Management
Utilize the integrated cable management system to route and conceal TV and device cables for a tidy appearance and to prevent tripping hazards.
6. Maintenance
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the powder-coated steel finish.
- Inspection: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary.
- Storage: If storing the stand, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
7. Troubleshooting
- Stand is wobbly:
- Ensure all assembly bolts are securely tightened.
- Verify the stand is on a flat, level surface.
- Check that all wheels are locked when stationary.
- TV is not level:
- Adjust the TV hooks on the back of the TV to ensure even placement.
- Check the mounting plate for proper installation.
- Wheels not rolling smoothly:
- Check for obstructions around the wheels.
- Ensure the wheel locks are fully disengaged.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 379577 |
| Material | Powder-coated steel (Alloy Steel) |
| Color | Black |
| Overall Dimension (L x W x H) | 78L x 56W x 159H cm (30.71 x 22.05 x 62.6 inches) |
| Compatible Screen Sizes | 32" - 70" |
| Max TV Load Capacity | 50 kg (110.2 lb) |
| Max Shelf Load Capacity | 15 kg |
| VESA Compatible Sizes | 100x100, 200x100, 200x200, 200x300, 400x300, 400x400, 500x400, 600x400 mm |
| TV Plate Height Adjustment | 5 heights (96 - 136 cm, 10 cm deviation per level) |
| Tilt Adjustment | +/-15° (up/down) |
| Wheels | 4 lockable wheels |
| Cable Management | Integrated system |
Image: Dimensional drawing and VESA compatibility.
9. Warranty Information
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official vidaXL website. Keep your proof of purchase for warranty claims.
10. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact vidaXL customer support. Contact details can typically be found on the vidaXL website or on your purchase invoice.
For more information, visit the official vidaXL store: vidaXL Store on Amazon
