1. Introduction
This manual provides detailed instructions for the safe and efficient use of your Cal 100W 3 Way Macon Glass Table Lamp with 2W LED Night Light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Figure 1: Cal 100W 3 Way Macon Glass Table Lamp, showcasing its elegant design with a white fabric shade and a clear glass base.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury to persons, please observe the following safety precautions:
- Read all instructions carefully before assembly and operation.
- Do not connect electricity until the lamp is fully assembled.
- Always unplug the lamp from the electrical outlet before cleaning or changing bulbs.
- Use only the specified bulb type and wattage. This lamp supports a 100W (main) and 2W LED (night light) bulb.
- Do not use with a damaged cord or plug. If the cord or plug is damaged, do not attempt to repair it. Contact qualified service personnel.
- Do not place the lamp near heat sources or in direct sunlight.
- This product is for indoor use only. Do not expose to water or moisture.
3. Package Contents
Verify that all components are present and undamaged before proceeding with assembly:
- Lamp Base (Metal and Glass Construction)
- Hardback Fabric Shade
- Harp and Finial (pre-attached or separate)
- User Manual
Figure 2: The Cal Macon Glass Table Lamp illuminated, demonstrating the main light source.
4. Setup and Assembly
Follow these steps to assemble your table lamp:
- Carefully unpack all components from the packaging.
- Place the lamp base on a stable, flat surface.
- If the harp is not pre-attached, squeeze the two ends of the harp and insert them into the saddle on the lamp base.
- Place the fabric shade onto the harp. Ensure it sits evenly.
- Secure the shade by screwing the finial onto the top of the harp.
- Insert the appropriate main bulb (up to 100W, E26 base) into the main socket.
- The 2W LED night light bulb is typically integrated or pre-installed.
- Plug the lamp into a standard 120V AC electrical outlet.
Figure 3: The Cal Macon Glass Table Lamp positioned on a nightstand in a bedroom, demonstrating its functional and aesthetic integration into a living space.
5. Operating Instructions
This lamp features a convenient 3-way rotary switch for versatile lighting options:
- First Turn: Activates the 2W LED night light, providing a soft, ambient glow.
- Second Turn: Activates the main 100W bulb, providing bright illumination for general lighting.
- Third Turn: Activates both the main 100W bulb and the 2W LED night light for maximum brightness.
- Fourth Turn: Turns the lamp off.
6. Maintenance
Proper care will ensure the longevity and performance of your lamp:
- Cleaning: Always unplug the lamp before cleaning. Wipe the lamp base with a soft, dry cloth. Do not use abrasive cleaners or polishes as they may damage the finish. The fabric shade can be gently dusted with a soft brush or vacuum cleaner attachment.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb, not exceeding 100 watts for the main light. The LED night light is typically long-lasting and may not require replacement.
7. Troubleshooting
If you encounter any issues with your lamp, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Lamp not plugged in. Bulb is loose or burnt out. Power outlet is not working. | Ensure plug is fully inserted into outlet. Tighten or replace bulb. Test outlet with another appliance or check circuit breaker. |
| Light flickers. | Loose bulb. Incorrect bulb wattage. | Tighten bulb. Ensure bulb wattage is within specified limits (max 100W). |
| Night light not working. | First turn of rotary switch not engaged. Integrated LED failure. | Rotate switch to the first position. Contact customer support if integrated LED fails. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | BO-3181TB |
| Brand | Cal |
| Dimensions (D x W x H) | 16"D x 16"W x 29"H |
| Item Weight | 9.9 Pounds |
| Main Light Wattage | 100 Watts (Max) |
| Night Light Wattage | 2 Watt LED |
| Voltage | 120 Volts |
| Bulb Base | E26 |
| Switch Type | 3-Way Rotary Switch |
| Material | Glass, Metal, Fabric (Shade) |
| Finish Type | Painted (Brushed Steel) |
| Shade Color | White |
| Light Source Type | Incandescent (Main), LED (Night Light) |
| Indoor/Outdoor Usage | Indoor |
9. Warranty Information
This product is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.
10. Customer Support
For further assistance, technical support, or warranty inquiries, please contact Cal Lighting customer service. Refer to the product packaging or the retailer's website for the most current contact information.
We appreciate your purchase of the Cal 100W 3 Way Macon Glass Table Lamp.
