Bowers & Wilkins Pi6 Wireless Earbuds Instruction Manual

Introduction

The Bowers & Wilkins Pi6 True Wireless Earbuds offer a premium audio experience with a true 24-bit connection and aptX Adaptive technology. Designed for optimal performance across various audio activities, these earbuds feature 12mm bio-cellulose drive units for reduced distortion and enhanced high-frequency detail. Advanced active noise cancellation and three built-in microphones ensure clear calls and an immersive listening experience. The ergonomic design provides a comfortable and secure fit, while the Bowers & Wilkins Music App allows for direct music streaming and customization.

What's in the Box

• 2 Pi6 ear buds
• Pi6 charging case
• Ear tips (XS/S/M/L)
• Cable (USB-C charging cable)
• Literature pack (including this manual)

Setup

1. Charging the Earbuds and Case

Before first use, fully charge your Pi6 earbuds and charging case. Connect the provided USB-C cable to the charging port on the case and to a power source. The LED indicator on the case will show charging status.

The Pi6 charging case, which provides up to 24 hours of additional battery life.

A quick 15-minute charge provides approximately 2 hours of listening time for the earbuds.

Quick charge support offers 2 hours of listening from a 15-minute charge.

2. Pairing with Your Device

1. Ensure your device's Bluetooth is enabled.
2. Open the lid of the Pi6 charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED on the case.
3. Select "Bowers & Wilkins Pi6" from the list of available Bluetooth devices on your phone or tablet.
4. Once connected, the LED on the case will turn solid blue or green.

3. Achieving the Best Fit

Selecting the correct ear tip size is crucial for optimal sound quality and active noise cancellation. Experiment with the included XS, S, M, and L ear tips to find the most comfortable and secure fit for your ears. A good seal will enhance bass response and noise isolation.

The ergonomic design of the Pi6 earbuds ensures a comfortable and secure fit for extended wear.

Operating Your Pi6 Earbuds

Touch Controls

The Pi6 earbuds feature intuitive single-button touch controls on each earbud. These controls can be customized via the Bowers & Wilkins Music App.

The single-button UI supports multiple functions for easy control.

• Single Tap: Play/Pause music, Answer/End call.
• Double Tap: Skip forward.
• Triple Tap: Skip backward.
• Press and Hold (1 second): Toggle Active Noise Cancellation (ANC) / Pass-Through mode.
• Press and Hold (Right Earbud, 1 second): Activate Voice Assistant.

Active Noise Cancellation (ANC) and Pass-Through

The Pi6 earbuds feature advanced active noise cancellation to block out external sounds, allowing for an immersive listening experience. The Pass-Through mode allows ambient sound to be heard, keeping you aware of your surroundings.

aptX Adaptive technology dynamically adjusts audio performance for optimal sound quality.

Toggle between ANC On, Pass-Through, and Off by pressing and holding either earbud for 1 second. The earbuds automatically adjust cancellation levels to your environment using three microphones per earbud.

Bowers & Wilkins Music App

Download the Bowers & Wilkins Music App (available for iOS and Android) to unlock the full potential of your Pi6 earbuds. The app allows you to:

• Customize touch controls.
• Adjust a 2-band equalizer (bass and treble).
• Manage noise cancellation modes.
• Stream music from various services (TIDAL, Pandora, Qobuz, Deezer, SoundCloud).
• Receive firmware updates.

Maintenance

Cleaning

Regularly clean your earbuds and charging case to maintain optimal performance and hygiene. Use a soft, dry, lint-free cloth. Avoid using abrasive materials or harsh chemicals. Remove ear tips and clean them with mild soap and water, ensuring they are completely dry before reattaching.

Water and Dust Resistance

The Pi6 earbuds have an IP54 rating, providing protection against dust ingress and splashes of water. This makes them suitable for workouts, running, and outdoor listening. However, they are not designed for submersion in water.

Troubleshooting

Connectivity Issues

If you experience intermittent connection or difficulty pairing:

• Ensure both earbuds are fully charged.
• Place the earbuds back into the charging case, close the lid, wait a few seconds, then open it again to reset the connection.
• Forget the device ("Bowers & Wilkins Pi6") from your device's Bluetooth settings and attempt to re-pair.
• Ensure your device is within the 10-meter Bluetooth range.

App Functionality Problems

If the Bowers & Wilkins Music App is not connecting or behaving unexpectedly:

• Close and restart the app.
• Check for app updates in your device's app store.
• Ensure your earbuds' firmware is up to date via the app's settings.
• If issues persist, try uninstalling and reinstalling the app.

Battery Drain

If you notice unusual battery drain from the earbuds or charging case:

• Ensure the earbuds are properly seated in the charging case when not in use.
• Confirm the charging case lid is fully closed.
• Check for any available firmware updates for your earbuds, as these often include battery optimization improvements.

Specifications

Warranty and Support

For detailed warranty information, product registration, and technical support, please visit the official Bowers & Wilkins website or contact their customer service. Keep your proof of purchase for warranty claims.

Online Support: www.bowerswilkins.com/support