OLV A22

OLV Hand Warmers Rechargeable (Model A22) Instruction Manual

Model: A22

Introduction

Thank you for choosing the OLV Hand Warmers Rechargeable. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.

The OLV Hand Warmers are designed to provide portable and long-lasting warmth, featuring a strong magnetic connection for combined use, multiple heat settings, and advanced safety features. They are ideal for various indoor and outdoor activities in cold weather.

Package Contents

Upon unpacking, please ensure all items listed below are present and in good condition:

OLV Hand Warmers in gift packaging with charging cable and manual
Image: The OLV Hand Warmers, charging cable, and user manual as included in the product packaging.

Setup

Before first use, fully charge both hand warmers. Use the provided USB-C charging cable to connect the devices to a compatible USB power source.

Charging Instructions:

  1. Connect the dual USB-C ends of the charging cable to the charging ports on each hand warmer.
  2. Connect the USB-A end of the cable to a USB power adapter (not included) or a computer USB port.
  3. The blue indicator lights on the hand warmers will illuminate to show charging status. All four blue lights indicate a full charge.
  4. Charging typically takes approximately 3 hours.
OLV Hand Warmers with USB-C charging cable and certification logos
Image: The OLV Hand Warmers with their USB-C charging cable, highlighting the charging ports and product certifications.

Operating Instructions

Power On/Off:

Adjusting Heat Levels:

The hand warmers feature 4 adjustable heat levels. Once powered on, short press the power button to cycle through the heat settings:

Heat is released instantly, within 3 seconds of activation.

OLV Hand Warmer heating up in 2 seconds
Image: The OLV Hand Warmer demonstrating its rapid 2-second heat-up capability.
OLV Hand Warmer showing double-sided instant heating with 4 heat levels and battery life
Image: Visual representation of the four double-sided heating levels and their approximate durations.
Diagram showing the four heat levels (Low, Medium, High, Super High) with temperature ranges and paw print indicators.
Image: A diagram illustrating the four distinct heat levels, their corresponding temperature ranges, and how they are indicated by the paw print lights.

Magnetic Feature:

The two hand warmers are equipped with strong magnets, allowing them to be combined into a single unit for concentrated warmth or separated for individual use. This ergonomic design ensures a comfortable grip.

OLV Hand Warmers demonstrating strong magnetic connection
Image: The two OLV Hand Warmers magnetically connected, illustrating their 2-in-1 functionality.
Illustration of the magnetic double-sided warmth feature, showing two hand warmers attracting each other.
Image: A graphic depicting the magnetic double-sided warmth, showing the two units attracting to form a single warmer.

Portability:

These hand warmers are designed to be ultra-light and thin, making them easy to carry in a pocket or bag. They are also airline-friendly.

OLV Hand Warmer showing ultra-light and thin design, fitting into a pocket
Image: The OLV Hand Warmer being held and placed into a pocket, emphasizing its compact and lightweight design.
Visual comparison of the hand warmer's small size, lightweight nature, and airline-friendly design.
Image: A visual comparison highlighting the small size, lightweight nature, and airline-friendly design of the hand warmers.

Safety Information

The OLV Hand Warmers are built with premium AI intelligent chipsets and high-tech aviation-grade aluminum and ABS materials, ensuring multiple protection technologies to prevent overheating, over-voltage, over-current, and short circuits. They are flame-proof, explosion-proof, and emit no radiation.

OLV Hand Warmer showing internal safety assurance chip and multiple protection technologies
Image: An X-ray view of the OLV Hand Warmer, highlighting its internal safety assurance chip and protection mechanisms.
Graphic illustrating the multiple protection system including overheating, over-voltage, over-current, and short-circuit protection.
Image: A graphic detailing the comprehensive multiple protection system, including safeguards against overheating, over-voltage, over-current, and short-circuits.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Device not turning onLow batteryCharge the device fully.
Device not heatingNot powered on or low batteryEnsure the device is powered on (red lights visible) and fully charged.
Short battery lifeHigh heat setting used continuouslyLower the heat setting for extended battery life. Ensure full charge before use.
Charging issueFaulty cable or power sourceTry a different USB-C cable or power adapter.

Specifications

Warranty and Support

This product comes with a 1-Year Warranty from the date of purchase. For warranty claims, technical support, or any inquiries, please contact OLV customer service through your retailer or the official OLV website.

Product Videos

Magnetic Battery Hand Warmers

Video: This video demonstrates the magnetic feature of the hand warmers, showing how they connect and disconnect, and how to activate the heating function.

Life Saver Hand Warmers Keep in My Coat

Video: A short demonstration showing how easily the hand warmers can be placed and carried in a coat pocket for warmth.

Related Documents - A22

Preview AUKEY CB-A22 USB 3.0 A to C Adapter 2-Pack User Manual
Official user manual for the AUKEY CB-A22 USB 3.0 A to C Adapter 2-Pack. Find product specifications, package contents, warranty details, and customer support contact information.
Preview Hilti SI-AT-A22 and SIW 6AT-A22 Operating Instructions
Operating instructions for Hilti SI-AT-A22 and SIW 6AT-A22 fastening system components. This document provides visual guidance and essential information for the correct assembly and use of these Hilti products.
Preview Hilti X-BT-MF-N M10 Operating Instructions and Specifications
Detailed operating instructions and technical specifications for the Hilti X-BT-MF-N M10 fastening system, including measurements, compatible tools, and usage guidelines.
Preview Hilti HSL4-G with AT Module: Installation and Technical Specifications
Comprehensive guide to installing and using the Hilti HSL4-G anchor with AT module. Includes technical data, setting instructions, and removal procedures for various anchor sizes.
Preview Samsung Galaxy A22 5G Charging Port Board Replacement & Troubleshooting Guide
Detailed information and installation guide for replacing the charging port board on Samsung Galaxy A22 5G (SM-A226B/DS). Includes troubleshooting tips for common charging and audio issues.
Preview Hilti HSA-R M8 Anchor Installation and Specifications
Detailed operating instructions and technical specifications for the Hilti HSA-R M8 anchor, including installation steps, dimensions, and torque requirements.