Introduction
Welcome to the instruction manual for your new anysun R27 Programmable Remote Control Robot Dog Toy. This manual provides essential information for setting up, operating, and maintaining your robot dog to ensure a safe and enjoyable experience. Please read through all instructions carefully before first use.
Product Overview
The anysun R27 Robot Dog is an interactive toy designed for children, featuring multiple control methods including remote control, touch sensors, gesture sensing, and voice commands. It offers intelligent programming capabilities, allowing users to create custom command sequences. The robot dog can perform various stunts, dance, sing, and imitate the sounds of 10 different animals, providing an engaging and educational play experience.
Figure 1: The anysun R27 Robot Dog Toy and its remote control.
Safety Information
- Age Recommendation: Suitable for children aged 6 years and up.
- Supervision: Adult supervision is recommended during play, especially for younger children.
- Battery Safety: Use only the specified Lithium Ion battery and charging cable. Do not attempt to open or modify the battery.
- Choking Hazard: Keep small parts away from young children to prevent choking.
- Hair Entanglement: Ensure long hair is tied back to prevent entanglement with moving parts, such as the wheels on the robot's feet.
- Water Exposure: Keep the robot dog away from water and moisture to prevent damage to electronic components.
- Impact: Avoid dropping or subjecting the robot dog to strong impacts.
What's in the Box
- 1 x anysun R27 Robot Dog Toy
- 1 x Remote Control
- 1 x USB Charging Cable
- 1 x Lithium Ion Battery (included inside the robot dog)
Setup
- Unpack: Carefully remove all components from the packaging.
- Battery Installation (Remote Control): Open the battery compartment on the back of the remote control. Insert 2 x AAA batteries (not included), ensuring correct polarity. Close the compartment.
- Power On: Locate the power button on the robot dog (usually on its chest or back). Press and hold the button for a few seconds until the robot dog activates and its eyes light up.
- Pairing: The robot dog and remote control should automatically pair upon activation. If not, refer to the troubleshooting section.
Charging the Battery
The anysun R27 Robot Dog is equipped with a rechargeable Lithium Ion battery. To charge:
- Locate the charging port on the robot dog (often on its underside or side).
- Connect the small end of the USB charging cable to the robot dog's charging port.
- Connect the larger end of the USB charging cable to a standard USB power adapter (e.g., phone charger, computer USB port) or a power bank.
- The robot dog's indicator light will show charging status (e.g., red for charging, green or off for fully charged).
- A full charge typically takes approximately 70 minutes and provides about 90 minutes of playtime.
Figure 2: Rechargeable battery information, indicating 70 minutes for charging and 90 minutes of use.
Operating Instructions
Multiple Control Methods
The anysun R27 Robot Dog can be controlled using several interactive methods:
Figure 3: Overview of the robot dog's multiple control methods.
1. Remote Control
Use the provided remote control to direct the robot dog's movements and trigger various actions. The remote features directional buttons for forward, backward, left, and right, along with dedicated buttons for stunts, dancing, and other functions.
Video 1: Demonstration of the robot dog's remote control functions, including various movements and tricks.
2. Voice Commands
The robot dog responds to specific voice commands. Speak clearly and at a normal volume. Refer to the list of commands in the included quick start guide or experiment with common commands like "Sit down," "Get down," "Forward," etc.
3. Touch Sensors
The robot dog has touch-sensitive areas (e.g., on its head or back) that trigger responses when petted or touched. These responses can include happy sounds, movements, or other interactive behaviors.
4. Gesture Sensing
Certain gestures made in front of the robot dog's sensors can activate specific actions. Consult the quick start guide for details on recognized gestures.
Intelligent Programming
The robot dog can be programmed to perform a sequence of actions. To enter programming mode, press the "Program" button on the remote control. Input your desired sequence of movements and stunts using the remote, then press "Program" again to save and execute the sequence. This feature helps children learn basic programming concepts.
Figure 4: Intelligent programming feature in action.
Animal Sound Imitation
The robot dog can imitate the sounds of 10 different animals. Activate this feature via the remote control or a specific voice command. The animals include:
- Tigers
- Elephants
- Pigs
- Gorillas
- Sheep
- Cows
- Horses
- Chickens
- Cats
- Ducks
Figure 5: The robot dog's animal sound imitation feature.
Stunts, Dancing, and Storytelling
The robot dog can perform a variety of pre-programmed stunts such as push-ups, auto demos, yoga, and handstands. It can also dance to music and tell stories. These functions are typically activated via dedicated buttons on the remote control or specific voice commands.
Figure 6: The robot dog engaging with children, demonstrating its interactive playmate capabilities.
Maintenance
- Cleaning: Wipe the robot dog with a soft, dry cloth. Do not use water or cleaning solutions.
- Storage: When not in use for extended periods, turn off the robot dog and remove batteries from the remote control. Store in a cool, dry place away from direct sunlight.
- Battery Care: Recharge the robot dog's battery regularly, even if not in frequent use, to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot dog does not turn on. | Low battery or power switch off. | Charge the robot dog's battery. Ensure the power switch is in the "ON" position. |
| Remote control not working. | Remote control batteries are dead or incorrectly installed. | Replace remote control batteries, ensuring correct polarity. Ensure the remote is within range. |
| Robot dog does not respond to voice commands. | Background noise, unclear speech, or incorrect command. | Reduce background noise. Speak clearly and use the correct commands. Ensure you are close enough to the robot dog. |
| Robot dog moves erratically or stops unexpectedly. | Low battery or interference. | Recharge the robot dog's battery. Move away from other electronic devices that may cause interference. |
Specifications
- Model Number: R27
- Product Dimensions: 8 x 5 x 6 inches
- Item Weight: 2.25 pounds
- Recommended Age: 6 years and up
- Battery: 1 Lithium Ion battery (included)
- Charging Time: Approximately 70 minutes
- Playtime: Approximately 90 minutes
- Control Methods: Remote, Touch, Gesture, Voice
- Manufacturer: GUANGDONG JIANJIAN INTELLIGENT TECHNOLOGY CO., LTD.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official anysun website. Keep your purchase receipt as proof of purchase.
