Bealife QYF-TB4041-C

Download PDF
Contents

Bealife Dining Chairs Instruction Manual

Model: QYF-TB4041-C (Set of 4, Velvet Light Grey)

Introduction

Thank you for choosing Bealife Dining Chairs. This manual provides essential information for the safe assembly, operation, and maintenance of your new chairs. Please read these instructions carefully before assembly and retain them for future reference. These chairs are designed for indoor use in dining rooms, kitchens, living rooms, and offices, offering comfort and stability.

Four assembled Bealife dining chairs in light grey velvet around a dining table.

Image: Four assembled Bealife dining chairs in light grey velvet around a dining table, showcasing their modern design and suitability for a dining area.

Safety Information

  • Weight Limit: Do not exceed the maximum recommended load capacity of 150 kg (330 lbs) per chair. Exceeding this limit may cause damage to the chair and potential injury.
  • Stable Surface: Always place the chairs on a flat, stable, and hard surface to prevent tipping.
  • Assembly: Ensure all components are correctly assembled and tightened before use. Periodically check and re-tighten all fasteners.
  • Children: Keep small parts and packaging materials away from children during assembly.

Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • 4 x Chair Seats (Velvet Light Grey)
  • 4 x Chair Backrests (Velvet Light Grey)
  • 16 x Chair Legs (Metal)
  • Hardware Pack (screws, washers, Allen key)
  • Assembly Instructions

Setup and Assembly

Assembly is required for these chairs. Please follow the steps below carefully. A screwdriver is provided, but an electric screwdriver (not included) is recommended for efficiency.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
  2. Identify Parts: Refer to the included assembly diagram to identify each component (seat, backrest, legs, hardware).
  3. Attach Legs to Seat: Securely attach the four chair legs to the underside of each chair seat using the provided screws and Allen key. Ensure all screws are tightened evenly to prevent wobbling.
  4. Attach Backrest: Connect the backrest to the seat frame using the designated screws. Ensure the backrest is firmly attached and stable.
  5. Final Check: Once assembled, gently shake the chair to ensure stability. If any wobbling occurs, re-tighten all screws.
Assembly guide showing a couple assembling furniture with tools and text instructions in French.

Image: An assembly guide illustrating the process with a couple using tools, alongside text detailing steps and tool recommendations.

Operating Instructions

These chairs are designed for comfortable seating in various indoor environments.

  • Ergonomic Design: The chairs feature an ergonomic design with a high backrest and padded seat to provide support and comfort, reducing spinal tension during prolonged sitting.
  • Versatile Use: Suitable for dining rooms, living rooms, kitchens, offices, and study areas. Their lightweight design allows for easy repositioning.
  • Floor Protection: Each leg is equipped with anti-slip foot caps to prevent scratching hard floors and reduce noise when moving the chairs.
Side view of a Bealife dining chair with an overlay illustrating ergonomic back support.

Image: Side view of a Bealife dining chair with an overlay highlighting its ergonomic design for back support.

Bealife dining chair shown in various room settings: bedroom, living room, office, dining room, and study.

Image: A Bealife dining chair depicted in multiple versatile scenarios, including a bedroom, living room, office, dining room, and study, demonstrating its adaptability.

Maintenance

Proper care will extend the life and appearance of your chairs.

  • Cleaning: For daily cleaning, simply wipe the velvet upholstery with a soft, damp cloth. For stubborn stains, use a mild fabric cleaner and blot gently. Avoid abrasive cleaners or harsh chemicals.
  • Dusting: Regularly dust the metal frame and legs with a dry, soft cloth.
  • Inspection: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary to maintain stability.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause the velvet fabric to fade.
Close-up of the velvet fabric texture of the chair.

Image: A close-up view of the light grey velvet fabric, highlighting its soft texture.

Troubleshooting

If you encounter any issues with your chairs, please refer to the following common solutions:

  • Wobbly Chair: If a chair feels unstable or wobbly, check all assembly screws. Loosen them slightly, sit on the chair to settle the legs, and then re-tighten all screws firmly and evenly. Ensure the chair is on a level surface.
  • Missing Parts: If any parts are missing from the package, please contact Bealife customer support immediately for assistance.
  • Difficulty Assembling: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. If issues persist, contact customer support.

Specifications

FeatureDetail
BrandBealife
Model NumberQYF-TB4041-C
ColorVelvet Light Grey
MaterialMetal frame, Polyester (Velvet) upholstery, Polyester filling
Product Dimensions (D x W x H)41 cm x 39 cm x 96 cm (16.1 x 15.4 x 37.8 inches)
Seat Depth39 cm (15.4 inches)
Item Weight (per set of 4)27.2 Kilograms (59.9 lbs)
Maximum Load Capacity150 Kilograms (330 lbs)
Back StyleFull Back
Special FeatureAnti-slip foot caps
Assembly RequiredYes
Country of OriginChina
Diagram showing the dimensions of a Bealife dining chair: 96 cm height, 39 cm seat depth, 41 cm overall depth, and a 150 kg weight capacity icon.

Image: A diagram illustrating the key dimensions (height, depth, seat depth) and maximum weight capacity of the Bealife dining chair.

Close-up of an anti-slip foot cap on a chair leg.

Image: Close-up of the anti-slip foot cap, designed to protect floors and reduce noise.

Warranty Information

Specific warranty details for this product are not provided within this manual. For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact Bealife customer support directly. Please retain your proof of purchase for any warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Bealife customer service. Contact information can typically be found on the product packaging, the retailer's website, or the official Bealife brand store.

We are committed to providing support and ensuring your satisfaction with our products.

© 2026 Bealife. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.