Goplus 36" x 18" Rolling Welding Table

Introduction

Thank you for choosing the Goplus 36" x 18" Rolling Welding Table. This robust workbench is designed to enhance your workshop's functionality and efficiency, providing a stable and organized platform for welding, repairs, and assembly tasks. Constructed from heavy-duty metal, it offers a high load capacity and features convenient tool storage and mobile functionality. Please read this manual thoroughly before assembly and operation to ensure safe and correct usage.

Important Safety Information

Always follow basic safety precautions when using this product to reduce the risk of injury or damage. Keep this manual for future reference.

• Ensure all components are securely fastened before use.
• Do not exceed the stated weight capacities for the tabletop, bottom shelf, and tool tray.
• Always lock the wheels when the table is in a stationary position to prevent accidental movement.
• Use appropriate personal protective equipment (PPE) when performing welding or other hazardous tasks on the workbench.
• Keep the work area clean and well-lit.
• Do not modify the product in any way, as this may compromise its structural integrity and void any warranty.

Package Contents

Verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer service.

• 1 x Welding Table (disassembled components)
• 1 x Instruction Manual
• Hardware Pack (screws, nuts, washers, etc.)

Setup and Assembly

Follow these steps to assemble your Goplus Rolling Welding Table. It is recommended to have a second person assist with assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list to ensure all items are present.
2. Attach Legs to Tabletop: Position the tabletop upside down. Attach the four vertical support legs to the designated mounting points on the underside of the tabletop using the provided screws and hardware. Do not fully tighten screws at this stage.
3. Install Bottom Shelf: Connect the bottom shelf to the lower sections of the vertical support legs. Ensure the raised edge of the bottom shelf is facing upwards to prevent tools from falling. Secure with screws and hardware, but do not fully tighten.
4. Attach Tool Rack and Tray: Mount the tool rack and tool tray to the side of the table as shown in the product images. Use the appropriate screws and hardware.
5. Install Wheels: Attach the four universal wheels to the bottom of the vertical support legs. Ensure all wheels are securely fastened.
6. Final Tightening: Once all components are in place, carefully turn the table upright. Systematically tighten all screws and bolts, ensuring the table is stable and rigid.

Image: Overview of the assembled welding table, highlighting the countertop, bottom shelf, tool tray, tool rack, and nozzle holders.

Image: Detailed view showing the 5/8" fixture holes on the tabletop, the raised edge of the bottom shelf, and the reinforced screw connections.

Operating Instructions

1. Using the Lockable Universal Wheels

• Moving the Table: To move the welding table, ensure all four wheels are in the "Unlock" position. The 360° rotating design allows for easy maneuverability across your workspace.
• Securing the Table: To stabilize the table for work, push down the locking levers on all four wheels to the "Lock" position. This will prevent the table from moving during operation.

Image: Illustration of the lockable universal wheels, demonstrating the unlock, lock, and 360° rotating functions.

2. Utilizing the Work Surface and Fixture Holes

• The electroplating tabletop provides a durable surface for various tasks.
• The 5/8" fixture holes are evenly arranged to accommodate a variety of jigs, clamps, and fixtures, allowing for precise positioning and securing of workpieces during welding, assembly, or repair.

Image: The welding workbench in action, demonstrating its high-strength capacity for heavy-duty welding work.

Image: A close-up of a person performing welding on the table, showcasing the practical use of the work surface.

3. Organizing Tools

• Utilize the spacious countertop, bottom shelf, tool tray, and tool rack to keep your welding tools and accessories organized and within easy reach.
• The 2 welding nozzle holders and 8 tooling slots provide dedicated storage for specific items, improving work efficiency.
• The raised edge of the bottom shelf helps prevent tools from falling off during movement or work.

Image: The versatile workbench illustrating its use for welding, repair, assembly, and tool placement.

Image: The Goplus welding table integrated into a workshop environment, demonstrating its practical use with various tools and equipment.

Maintenance

• Cleaning: Regularly wipe down the tabletop and other surfaces with a damp cloth to remove dust, debris, and welding spatter. For stubborn grime, use a mild cleaner suitable for metal surfaces. Avoid abrasive cleaners that could damage the electroplating.
• Hardware Check: Periodically inspect all screws, bolts, and connections to ensure they remain tight. Re-tighten any loose hardware to maintain the table's stability and structural integrity.
• Wheel Inspection: Check the wheels for any signs of wear or damage. Keep the wheel casters free of debris to ensure smooth rotation and effective locking.
• Rust Prevention: While the table is made of metal, prolonged exposure to moisture can lead to rust. Keep the table dry and consider applying a rust-inhibiting spray if operating in a humid environment.

Troubleshooting

• Table is Unstable/Wobbly:
  • Ensure all assembly screws and bolts are fully tightened.
  • Verify that the table is placed on a level surface.
• Wheels Not Rolling Smoothly:
  • Check for debris (e.g., metal shavings, dust) caught in the wheel casters and remove them.
  • Ensure the wheels are in the "Unlock" position.
• Wheels Not Locking:
  • Confirm that the locking levers are fully engaged in the "Lock" position.
  • Inspect the locking mechanism for any obstructions or damage.

Specifications

Image: Detailed product dimensions, including overall size, tabletop, and shelf measurements.

Warranty and Customer Support

Specific warranty information for this product is not provided in the product details. For warranty claims, technical support, or inquiries regarding missing/damaged parts, please contact Goplus customer service directly through their official website or the retailer where the product was purchased. Please have your model number (B0DCHXZWBX) and purchase date available when contacting support.