GIVI E455NT Monolock Top Case Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and correct installation, operation, and maintenance of your GIVI E455NT Monolock Top Case. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The GIVI E455NT is a 45-liter motorcycle top case designed for secure storage, featuring a Monolock attachment system and smoked reflectors for enhanced visibility.

Image 1.1: Front view of the GIVI E455NT Monolock Top Case.

2. Safety Information

• Maximum Load: Do not exceed the maximum load capacity of 3 kg (6.6 lbs). Overloading can affect motorcycle stability and handling.
• Speed Limit: Always adhere to the speed limits recommended by your motorcycle manufacturer and local traffic laws. Excessive speed with luggage can compromise stability.
• Weight Distribution: Distribute the weight evenly inside the top case. Place heavier items at the bottom and center to maintain balance.
• Secure Closure: Always ensure the top case is securely closed and locked before riding.
• Regular Checks: Periodically check the mounting screws and attachment system for tightness, especially after long rides or rough terrain.
• Motorcycle Handling: Be aware that adding a top case can alter your motorcycle's center of gravity and handling characteristics. Practice riding with the loaded top case in a safe environment.

3. Package Contents

Verify that all components are present in the package:

• GIVI E455NT Monolock Top Case (45 Liters)
• Universal Monolock Plate
• Mounting Hardware Kit (screws, washers, brackets)
• Keys (2x)
• Instruction Manual (this document)

4. Setup and Installation

The GIVI E455NT top case utilizes the Monolock system, which requires a universal plate to be mounted on your motorcycle's existing rear rack. If your motorcycle does not have a rear rack, a specific GIVI fitting kit may be required (sold separately).

4.1 Mounting the Universal Plate

1. Prepare the Rack: Ensure your motorcycle's rear rack is clean and free from obstructions.
2. Position the Plate: Place the universal Monolock plate on the rear rack. Adjust its position to ensure it is centered and does not interfere with the passenger seat or other motorcycle components.
3. Attach Brackets: Use the provided brackets and screws to secure the universal plate to the motorcycle rack. Depending on your rack design, you may need to use different combinations of brackets and spacers. Ensure all screws are tightened firmly but do not overtighten.
4. Verify Stability: Once mounted, gently shake the plate to ensure it is securely attached and does not wobble.

Image 4.1: Illustration of the universal Monolock plate installation on a motorcycle rack.

4.2 Attaching the Top Case to the Plate

1. Align the Case: Position the GIVI E455NT top case over the mounted universal plate, aligning the front hooks of the top case with the corresponding slots on the plate.
2. Press Down: Gently press the top case down until it clicks into place. You should hear an audible click, indicating that the rear locking mechanism has engaged.
3. Verify Security: Attempt to lift the top case without pressing the release button. It should be firmly attached to the plate.

Image 4.2: Attaching the top case to the universal Monolock plate.

5. Operating Instructions

The GIVI Monolock system allows for opening, closing, and detaching the top case with a single key.

5.1 Opening the Top Case

1. Insert the key into the lock cylinder located at the front of the top case.
2. Turn the key clockwise to unlock the lid.
3. Press the button adjacent to the lock cylinder to release the lid.
4. Lift the lid to open the top case.

5.2 Closing and Locking the Top Case

1. Lower the lid until it clicks shut.
2. Turn the key counter-clockwise to lock the lid. Remove the key.
3. Always ensure the lid is securely closed and locked before riding.

Image 5.1: Detail of the Monolock opening and locking mechanism.

5.3 Detaching the Top Case from the Plate

1. Insert the key into the lock cylinder.
2. Turn the key clockwise to the position that allows the release button to be pressed.
3. While holding the key in this position, press the large red release button located at the base of the top case, near the lock.
4. Lift the top case upwards and backwards to remove it from the universal plate.

Image 5.2: Detaching the top case from the universal plate.

6. Maintenance

• Cleaning: Clean the top case with a soft cloth, mild soap, and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate material and smoked reflectors.
• Lubrication: Periodically lubricate the lock mechanism with a silicone-based spray to ensure smooth operation.
• Storage: When not in use, store the top case in a cool, dry place away from direct sunlight to prevent material degradation.
• Reflectors: Keep the smoked reflectors clean to maintain their visibility.

7. Troubleshooting

• Case difficult to open/close: Check for obstructions inside the case or around the sealing edges. Ensure the lock mechanism is clean and lubricated.
• Case not locking: Ensure the lid is fully closed and aligned. The key should turn smoothly. Do not force the key.
• Case loose on plate: Verify that the universal plate is securely mounted to the motorcycle rack. Check that the top case is fully engaged with the Monolock mechanism (listen for the click).
• Water ingress: Check the rubber seal around the lid for damage or debris. Ensure the lid is properly closed and latched.

8. Specifications

Image 8.1: Dimensional diagram of the GIVI E455NT top case.

9. Warranty and Support

GIVI products are manufactured to high-quality standards. For warranty information, specific terms and conditions, or technical support, please refer to the official GIVI website or contact your authorized GIVI dealer. Keep your proof of purchase for any warranty claims.