DJCLUB LED Mini Moving Head Spot Light with 3-Face Prism (60W) User Manual

1. Introduction

This manual provides detailed instructions for the safe operation, setup, and maintenance of your DJCLUB LED Mini Moving Head Spot Light with 3-Face Prism. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage to the unit or injury to yourself.

2. Safety Information

• Electrical Safety: Always connect the unit to a grounded power outlet. Ensure the voltage matches the unit's requirements. Disconnect power before cleaning or servicing.
• Heat: The unit can become hot during operation. Maintain a minimum distance of 0.20m from flammable materials. Ensure adequate ventilation.
• Eye Safety: Do not look directly into the light source. The intense light can cause eye damage.
• Installation: Securely mount the unit using appropriate hardware. Ensure the mounting surface can support the weight of the fixture.
• Moisture: Do not expose the unit to rain or moisture. This can lead to electric shock or fire.
• Servicing: Refer all servicing to qualified personnel. Do not attempt to repair the unit yourself.

3. Package Contents

Verify that all items are present upon unpacking:

• LED 60W Moving Head Stage Lighting Unit
• DMX Cable
• User Manual (this document)
• Omega Bracket
• Power Cable

4. Product Overview

The DJCLUB LED Mini Moving Head Spot Light is a versatile lighting fixture designed for various events. It features a powerful 60W white LED engine, a color wheel with 7 colors plus white, a gobo wheel with 8 gobos, and a 3-face prism for dynamic effects.

4.1 Key Components

Figure 4.1: Front view of the DJCLUB LED Mini Moving Head Spot Light.

Figure 4.2: Rear view showing DMX IN/OUT, Power input, and cooling fan.

4.2 Color Wheel

The unit features a color wheel with 8 distinct colors plus white, allowing for a wide range of color mixing and half-color effects. The speed of color changes can be adjusted.

Figure 4.3: Illustration of the color wheel and its effects, including 8 colors and half-color options.

4.3 Gobo Wheel

An 8-gobo wheel provides various pattern projections. Gobo shaking and rotation features add dynamic movement to the projected patterns.

Figure 4.4: Illustration of the gobo wheel with 8 distinct patterns, including shake and rotation capabilities.

4.4 3-Face Prism

The integrated 3-face prism splits the light beam into multiple beams, creating a wider and more complex light show. It supports both forward and backward rotation.

Figure 4.5: Close-up view of the 3-face prism component.

Figure 4.6: Example of the lighting effect produced by the 3-face prism.

4.5 Manual Focus

The light features a manual focus adjustment on the lens to sharpen or soften the beam and gobo projections.

5. Setup Instructions

1. Unpacking: Carefully remove the unit from its packaging and inspect for any damage. Retain packaging for future transport.
2. Mounting: Use the provided Omega bracket to securely mount the fixture to a truss or other stable structure. Ensure all clamps and bolts are tightened. The unit can also be placed on a flat surface (floor mount).
3. Power Connection: Connect the power cable to the unit's power input and then to a suitable 110V AC grounded power outlet.
4. DMX Connection (Optional): If using DMX control, connect a DMX cable from your DMX controller's output to the unit's DMX IN port. For multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next.
5. Addressing: Set the DMX address for each unit using the menu panel on the base of the fixture. Refer to the DMX Channel Chart in the Specifications section for channel assignments.

6. Operating Modes

The DJCLUB LED Mini Moving Head Spot Light offers several operating modes:

• Automatic Operation Mode: The fixture runs through pre-programmed light sequences without external control.
• Sound Mode: The light reacts to ambient sound via its built-in microphone, synchronizing effects with music.
• DMX512 Mode: Provides full control over all functions (pan, tilt, color, gobo, prism, strobe, dimmer) using a DMX controller.
• Master-Slave Mode: One unit acts as the master, controlling other linked units (slaves) to perform synchronized shows.
• Strobe Mode: Activates a flashing light effect.
• Pattern Dithering: A mode that introduces subtle variations to gobo patterns.

Use the menu panel buttons (MENU, UP, DOWN, ENTER) to navigate and select operating modes and settings.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your lighting fixture.

• Cleaning: Periodically clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners.
• Fan Cleaning: Ensure the cooling fan is free from dust and debris to prevent overheating. Use compressed air if necessary.
• Inspection: Regularly check power and DMX cables for damage. Inspect mounting hardware for security.
• Storage: When not in use, store the fixture in its original packaging or a suitable case in a dry, dust-free environment.

8. Troubleshooting

9. Specifications

9.1 DMX Channel Chart (Example - typical 9/11 channel mode)

Note: Actual DMX channel assignments may vary. Refer to the display panel for specific DMX modes and values.

10. Warranty and Support

This product comes with a 1-year warranty from the manufacturer, Hong Yi. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.