Introduction
Thank you for choosing the iWALK 3-in-1 Wireless Charging Stand. This versatile charging station is designed to simultaneously power your iPhone, Apple Watch, and AirPods, providing a convenient and clutter-free charging experience. Featuring innovative Auto Rotation technology and an adjustable viewing angle, it enhances usability for various applications.
Figure 1: iWALK 3-in-1 Wireless Charging Stand with accessories.
Package Contents
Please verify that all items are present in your package:
- iWALK 3-in-1 Auto Turn Wireless Charging Station x 1
- 20W Charging Adapter x 1
- 5ft/1.5m USB-C to C Cable x 1
- User Manual x 1
Setup Guide
- Unpack the Device: Carefully remove the charging stand and all accessories from the packaging.
- Connect Power: Insert one end of the provided USB-C to C cable into the USB-C port on the back of the charging stand. Connect the other end of the cable to the 20W Charging Adapter.
- Plug into Outlet: Plug the 20W Charging Adapter into a wall power outlet. The charging stand is now ready for use.
- Prepare for Apple Watch Charging: The Apple Watch charging module is integrated and can be flipped out from the side of the main unit.
Figure 2: The 3-in-1 charging stand in use, demonstrating simultaneous charging.
Operating Instructions
Charging Your iPhone
The iWALK charging stand features a powerful N52 magnet for secure and efficient MagSafe-compatible charging. It delivers up to 15W high-speed wireless charging for compatible iPhone models.
- Ensure your iPhone is MagSafe compatible (iPhone 12 series and newer).
- Place your iPhone onto the magnetic charging pad. The magnets will automatically align your device for optimal charging.
- A charging indicator on the stand will illuminate, confirming that your iPhone is charging.
Figure 3: Magnetic alignment and 15W wireless charging capability.
Charging Your Apple Watch
The integrated Apple Watch charging module supports all Apple Watch Series (10/9/8/7/6/5/4/3/2/SE/Ultra/Ultra 2).
- Flip out the Apple Watch charging arm from the side of the main unit.
- Place your Apple Watch onto the charging puck. It will magnetically snap into place and begin charging.
Charging Your AirPods
The base of the charging stand provides a dedicated wireless charging spot for your AirPods (3/2/Pro/Pro 2).
- Place your AirPods charging case onto the designated charging area at the base of the stand.
- Ensure the AirPods case is centered on the charging area for optimal contact.
Auto Rotation and StandBy Mode
The iWALK stand incorporates infrared (IR) Auto Turn technology, allowing your iPhone to automatically switch between landscape and portrait orientations without physical contact. This feature is particularly useful for utilizing iOS StandBy Mode.
- When your iPhone is placed on the magnetic charger, the built-in infrared sensor detects your presence and can initiate rotation.
- To activate StandBy Mode, ensure your iPhone is running iOS 17 or later and is placed horizontally on the charger.
Figure 4: iPhone automatically rotating between landscape and portrait.
Figure 5: The iWALK stand supports iOS StandBy Mode, unlike some other chargers.
Adjustable Viewing Angle
The charging stand offers an adjustable viewing angle from 0° to 65°, allowing you to find the most comfortable position for viewing your device while it charges.
Figure 6: Adjusting the viewing angle for optimal comfort.
Safety Information
- Do not expose the device to liquids, moisture, or extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Do not disassemble, modify, or attempt to repair the device yourself.
- Ensure proper ventilation around the charging stand during use.
- The charger includes short circuit protection. If an issue occurs, disconnect from power immediately.
- Use only the provided 20W adapter and USB-C cable for optimal performance and safety.
Maintenance
- To clean the charging stand, disconnect it from the power source.
- Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the charging surfaces free of dust and debris to ensure efficient charging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging. |
|
|
| Auto Rotation not working. |
|
|
| Slow charging. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | MXS006 |
| Brand | iWALK |
| Connectivity Technology | Wireless, USB |
| Connector Type | USB Type C |
| Input Voltage | 5 Volts |
| Max Wireless Output | 15W (for iPhone) |
| Magnetic Strength | N52 Powerful Magnet (1.2kg suction force) |
| Adjustable Angle | 0-65° |
| Special Features | Charging Indicator, Fast Charging, MagSafe Compatible, Short Circuit Protection, Auto Rotation (Infrared Sensor), Travel-friendly, Sleep-Friendly |
| Item Weight | 1.52 pounds |
| Package Dimensions | 6.26 x 4.29 x 3.07 inches |
| Manufacturer | U2O GLOBAL CO.,LTD |
Compatibility
This charging stand is compatible with the following Apple devices:
- iPhones: iPhone 16, iPhone 15, iPhone 14, iPhone 13, iPhone 12 series (Pro Max, Pro, Mini, Plus, X, XR, XS Max, SE Plus) - Requires MagSafe compatibility.
- Apple Watch: Apple Watch Series 10, 9, 8, 7, 6, 5, 4, 3, 2, SE, Ultra, Ultra 2.
- AirPods: AirPods 3, AirPods 2, AirPods Pro, AirPods Pro 2.
For iPhone charging, ensure you are using a MagSafe-compatible phone case, or no case at all, for optimal magnetic alignment and charging efficiency.
Figure 7: Detailed compatibility overview.
Warranty and Support
For warranty information and customer support, please refer to the contact details provided in the original product packaging or visit the official iWALK website. Keep your purchase receipt for warranty claims.
For further assistance, you may contact iWALK Direct, the seller, through the Amazon platform.
