1. Product Overview
The AutoBull 6-inch running boards are designed to provide a convenient and secure step for accessing your vehicle. Constructed from high-quality, rust-resistant aluminum with a black powder-coated finish, these side steps offer durability and protection against various weather conditions.
Image 1.1: A pair of AutoBull 6-inch running boards with included mounting brackets, showcasing their black textured finish and robust design.
Key Features:
- Material: High-quality rust-resistant aluminum.
- Finish: Black powder-coated for enhanced durability and corrosion resistance.
- Design: Honeycomb anti-slip pattern on the stepping surface and unique ABS plastic corner covers.
- Width: 6 inches, providing a substantial stepping area.
- Load Capacity: Supports up to 450 lbs.
Image 1.2: Detailed view of the running board, highlighting the high-quality rust-resistant aluminum material, black powder-coated finish, and unique ABS plastic corner guard design.
2. Compatibility
These running boards are specifically designed for:
- 2024 Toyota Tacoma Double/Crew Cab (4 Full-Size Doors)
- 2025 Toyota Tacoma Double/Crew Cab (4 Full-Size Doors)
Note: These running boards are NOT compatible with Access Cab models (2 narrow rear doors) or Regular Cab models.
Image 2.1: Diagram illustrating compatibility with 2024-2025 Toyota Tacoma Double/Crew Cab models, explicitly showing incompatibility with Regular Cab and Access Cab versions.
3. What's in the Box
Please verify that all components are present before beginning installation:
- 2 x Running Boards (Left and Right)
- 6 x Mounting Brackets
- 1 x Screw Pack (Hardware for installation)
4. Setup and Installation
Installation typically requires basic hand tools. It is recommended to have a second person assist with positioning the running boards. Refer to the detailed video guide for visual instructions.
Required Tools (Not Included):
- Socket Wrench Set
- Torque Wrench (for proper fastener tightening)
- Safety Glasses
- Gloves
Installation Steps:
- Identify Mounting Points: Locate the pre-drilled holes on the vehicle's frame along the rocker panel. These are typically covered by plastic plugs. Remove any plugs as necessary.
- Attach Brackets: Secure the mounting brackets to the vehicle's frame using the provided hardware. Ensure the brackets are oriented correctly (front, middle, rear). Hand-tighten all bolts initially.
- Position Running Boards: Carefully lift and align the running board with the attached brackets. The bolts on the running board will slide into the slots on the brackets.
- Secure Running Boards: Attach the washers and nuts to the bolts protruding through the brackets. Hand-tighten all fasteners.
- Adjust and Final Tighten: Adjust the running board position to your preference. Once satisfied with the alignment, fully tighten all bolts to the manufacturer's recommended torque specifications.
Video 4.1: Detailed installation guide for running boards on a 2024+ Toyota Tacoma. This video demonstrates the process of attaching brackets and securing the running boards to the vehicle's frame.
Video 4.2: A quick showcase of running boards fitting the Tacoma Double Cab Crew Cab 2024 2025, demonstrating the product's appearance and fitment.
5. Operating Instructions
The running boards provide a stable step for easier entry and exit from your Toyota Tacoma. Always step firmly onto the textured surface. The 6-inch width and 450 lbs load capacity ensure a secure and comfortable experience for users.
Image 5.1: A foot stepping onto the 6-inch wide running board, illustrating its ample stepping area and textured surface for secure footing.
6. Maintenance
Regular maintenance will ensure the longevity and appearance of your AutoBull running boards.
- Cleaning: Wash the running boards regularly with mild soap and water to remove dirt, salt, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Inspection: Periodically check all mounting bolts and hardware for tightness. Re-tighten if any looseness is detected.
- Corrosion Prevention: The black powder-coated finish is designed to resist corrosion. However, promptly clean any deep scratches or chips to prevent rust formation.
Image 6.1: A truck equipped with running boards navigating snowy conditions, demonstrating the product's resistance to rain, snow, salt, and rust.
7. Troubleshooting
- Loose Running Board: If the running board feels loose or wobbly, inspect all mounting bolts and brackets. Tighten any loose fasteners immediately.
- Unusual Noises: Squeaking or rattling may indicate loose components. Check all connection points and ensure they are securely fastened.
- Difficulty Stepping: Ensure the stepping surface is clean and free of debris, ice, or mud to maintain optimal grip.
8. Specifications
| Attribute | Specification |
|---|---|
| Model Number | ABRB-1002 |
| Material | Aluminum |
| Exterior Finish | Black Powder Coated |
| Item Dimensions (L x W x H) | 85.43 x 7.48 x 7.48 inches |
| Item Weight | 35.5 pounds |
| Vehicle Service Type | 2024-2025 Toyota Tacoma Double/Crew Cab (4 Full Doors) |
| Load Capacity | 450 lbs |
Image 8.1: Diagram detailing the dimensions of the 6-inch wide running board, including length and width measurements.
9. Warranty and Support
AutoBull running boards come with a 36-month warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical assistance, or any product-related inquiries, please contact AutoBull customer support through the retailer where the product was purchased.
