Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your iMaihom 65W LED Security Light with Motion Sensor (Model BDP60G-3). Designed for outdoor use, this hardwired floodlight offers powerful illumination with advanced motion detection and dusk-to-dawn capabilities. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
Product Features
- Wide Lighting Area: Three adjustable heads provide extensive illumination coverage up to 1150 sq. ft., ideal for yards, gardens, and driveways.
- Highly Sensitive Motion Sensor: Promptly activates lights upon detecting movement, enhancing security.
- Dusk to Dawn Mode: Automatically turns off during the day, lights up at night at 30% brightness, and increases to 100% brightness upon motion detection.
- Easy Installation: Designed for straightforward hardwired connection to a mounting bracket.
- IP65 Waterproof Rating: Constructed from high-quality ABS material, ensuring durability and reliable performance in various weather conditions, including heavy rain and snow.
Package Contents
Verify that all components are present before beginning installation.
- iMaihom 65W LED Security Light (1 unit)
- Mounting Hardware (screws, expansion rubber plugs, EVA gasket, silicone gasket, wire nuts)
- Instruction Manual
Image: The iMaihom 65W LED Security Light, showing its three adjustable light heads and integrated motion sensor.
Video: Product unboxing and walk through, demonstrating the contents of the package.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Ensure the mounting surface can support the weight of the fixture.
- Do not connect to a dimmer switch.
- Do not look directly into the LED lights when illuminated.
Setup and Installation
This security light is designed for hardwired installation. Follow these steps carefully:
- Turn off Power: Before starting, ensure the power supply to the junction box is turned off at the circuit breaker.
- Attach Mounting Bracket: Secure the mounting bracket to the junction box using the provided screws. Ensure it is firmly attached.
- Connect Wiring:
- Connect the black wire from the fixture to the black (live) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the green (ground) wire from the fixture to the bare copper or green (ground) wire from the junction box.
- Use the provided wire nuts to secure all connections.
- Mount the Fixture: Align the fixture with the mounting bracket and secure it using the long machine screw. Ensure the foam gasket is properly seated to prevent water ingress.
- Adjust Light Heads: Loosen the screws on the side light heads and the motion sensor to adjust their angles as desired. Tighten screws once adjusted.
- Restore Power: Turn the power back on at the circuit breaker.
Image: Detailed diagram illustrating the three-step installation process, including securing the mounting bracket, connecting wires, and attaching the light fixture.
Video: Security Lights Motion Sensor Install, demonstrating the physical installation process of the light fixture.
Video: Super easy product installation guide, providing a visual guide to installing the security light.
Operating Instructions
The iMaihom security light offers multiple operating modes controlled by switches on the motion sensor unit.
Mode Selection
- Sensor Mode (Motion Only): The light remains off until motion is detected. It will then illuminate at 100% brightness for a set duration.
- Dusk to Dawn Mode (D2D): The light automatically turns on at 30% brightness when it gets dark and stays on. Upon detecting motion, it brightens to 100% for a set duration, then returns to 30% brightness.
- Test Mode: Used during installation to check the motion sensor's range and light coverage. The light will turn on for a short period when motion is detected, regardless of ambient light.
Adjustments
The motion sensor unit features dials for adjusting TIME, DIST (distance/sensitivity), and MODE.
- TIME: Adjusts how long the light stays on after motion is detected (e.g., 10 seconds to 10 minutes).
- DIST (Sensitivity): Controls the detection range of the motion sensor (e.g., Low, Medium, High).
- MODE: Selects between Sensor, D2D, and Test modes.
Image: Close-up view of the motion sensor's control dials for Mode, Time, and Distance settings.
Image: Visual representation of the Dusk to Dawn mode, showing the light turning on at 30% brightness at night and increasing to 100% upon motion detection.
Maintenance
The iMaihom LED Security Light is designed for minimal maintenance.
- Cleaning: Periodically wipe the light fixture and motion sensor lens with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
- Weather Protection: The IP65 waterproof rating ensures protection against dust and water jets. No special weatherproofing is required under normal conditions.
- Inspection: Annually inspect wiring and mounting for any signs of wear, damage, or loosening.
Image: The iMaihom security light demonstrating its IP65 waterproof capability during rainfall.
Troubleshooting
If your iMaihom LED Security Light is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Power is off; Sensor mode selected; Ambient light too high. | Check circuit breaker; Switch to D2D mode; Ensure sensor is not obstructed by other light sources. |
| Light stays on constantly. | D2D mode selected; Continuous motion detected; Sensor malfunction. | This is normal behavior for D2D mode at 30% brightness; Check for constant movement in sensor's range; Contact support if issue persists. |
| Light turns on too frequently or not enough. | Motion sensor sensitivity (DIST) setting is incorrect. | Adjust the DIST dial on the motion sensor to a lower or higher setting as needed. |
| Light turns off too quickly or stays on too long. | Time duration (TIME) setting is incorrect. | Adjust the TIME dial on the motion sensor to increase or decrease the illumination duration. |
Specifications
| Feature | Detail |
|---|---|
| Brand | iMaihom |
| Model Number | BDP60G-3 |
| Wattage | 65 watts |
| Brightness | 6500 lumens |
| Light Source | LED |
| Color Temperature | 6500K (Daylight White) |
| Number of Light Heads | 3 |
| Control Method | Motion Sensor, Dusk to Dawn |
| Motion Detection Angle | 180 degrees |
| Motion Detection Distance | Up to 72 feet |
| Water Resistance Level | IP65 Waterproof |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Mounting Type | Wall Mount, Surface Mount |
| Item Dimensions (L x W x H) | 9.48"L x 5.98"W x 4.52"H |
| Item Weight | 0.71 Kilograms |
Image: Diagram detailing the dimensions of the iMaihom 65W LED Security Light.
Warranty and Support
The iMaihom 65W LED Security Light (Model BDP60G-3) comes with a 2-year manufacturer's warranty.
For technical support, troubleshooting assistance, or warranty claims, please contact iMaihom customer service. You can find more information and contact details on the official iMaihom store page: iMaihom Store.
