Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your DenyDan 10-inch Portable Digital TV, Model ATSC10T. Please read this manual thoroughly before using the device to ensure optimal performance and safety. Keep this manual for future reference.
Important Safety Information
- Do not expose the unit to rain or moisture to prevent fire or electric shock.
- Do not open the casing. Refer all servicing to qualified personnel.
- Ensure proper ventilation. Do not block ventilation openings.
- Use only the power adapters provided with the device.
- Keep the device away from direct sunlight, heat sources, and strong magnetic fields.
- Clean the screen with a soft, dry cloth. Avoid liquid cleaners.
What's in the Box
Verify that all items are present in the packaging:
- 1 x DenyDan Portable TV
- 1 x Instruction Manual
- 1 x AV Cable
- 1 x Antenna
- 1 x AC Charger (110V)
- 1 x Car Charger (12V/24V)
- 1 x Remote Control
Image: All included accessories with the DenyDan Portable TV.
Product Overview
Familiarize yourself with the various parts and connections of your portable TV.
Front Panel
The front panel features the 10-inch LED display and control buttons typically located along the bottom edge for power, menu navigation, volume, and channel selection.
Side Panel Connections
Image: Detailed view of the side panel connections.
- Antenna Input: For connecting the external antenna for TV signal reception.
- AV IN / AV OUT: Audio/Video input and output for connecting external devices like DVD players or other monitors.
- 3.5mm Audio Jack: For connecting headphones or external speakers.
- HDMI Input: For connecting high-definition devices.
- USB Port: For playing media files from a USB drive.
- SD Card Slot: For playing media files from an SD card.
- 12/24V DC Input: For connecting the car charger.
- Power Button: To turn the device on/off.
Rear Panel
Image: Rear view with integrated kickstand and speaker grilles.
The rear panel includes built-in speakers and a foldable kickstand for tabletop viewing. It also features warning labels and model information.
Setup Guide
Follow these steps for initial setup of your DenyDan Portable TV.
1. Unboxing and Preparation
- Carefully remove the TV and all accessories from the packaging.
- Peel off any protective film from the screen.
2. Connecting the Antenna
- Locate the antenna input port on the side of the TV.
- Connect the included antenna to this port.
- For best signal reception, place the antenna near a window or in an open area.
3. Powering the TV
- Using AC Power: Connect the AC charger to the TV's power input and then to a standard 110V wall outlet.
- Using Car Power: Connect the car charger to the TV's 12/24V DC input and then to your vehicle's cigarette lighter socket.
- The TV has a built-in 4000mAh rechargeable lithium battery, providing up to 8 hours of viewing on a full charge.
Image: Powering the TV using either a 12/24V car charger or a 110V home adapter.
4. Initial Setup Wizard and Channel Scan
After powering on the TV for the first time, the Setup Wizard will guide you through the initial configuration.
- Press the POWER button to turn on the TV.
- Navigate to the Option menu and select Setup Wizard.
- Follow the on-screen prompts to select your preferred Language, Time Zone, and Time Format.
- Select the antenna type (Air/Cable) and proceed with the Auto Scan for channels. This process may take several minutes.
- Once the scan is complete, the TV will display available channels.
Video: A step-by-step guide on unboxing, connecting the antenna, and performing the initial channel setup on the DenyDan 10-inch Portable TV.
Operating Instructions
Basic Controls
- Power: Press the POWER button on the TV or remote to turn the unit on or off.
- Volume: Use the VOL+ and VOL- buttons to adjust the sound level.
- Channel: Use the CH+ and CH- buttons to change channels.
- Menu: Press the MENU button to access the on-screen display (OSD) menu.
- Input: Press the INPUT button to cycle through available input sources (TV, HDMI, AV, USB).
Menu Navigation
Use the arrow buttons (left, right, up, down) and the ENTER/OK button on the remote or TV to navigate through the OSD menu options.
- Picture: Adjust settings like Brightness, Contrast, Color, Tint, Aspect Ratio (16:10, 4:3), and Picture Mode.
- Sound: Adjust settings like Sound Mode, Treble, Bass, Balance, Auto Volume, and Surround Sound.
- Time: Set the current time, time zone, and sleep timer.
- Option: Access OSD Language, Closed Caption settings, Setup Wizard, and Restore Factory Default.
- Lock: Set parental controls or lock channels (password required).
Media Playback (USB/SD)
The TV supports playing various media files from USB drives (up to 64GB) and SD cards (up to 32GB), and even external HDDs up to 1TB.
Image: Multifunctionality features including supported media formats.
Supported Formats:
- Video: DIVX, AVI, MKV, MP4, WMV, RMVB (up to 1080p)
- Audio: MP3, WMA, AAC, AC3
- Photo: JPG, JPEG
Steps for Media Playback:
- Insert your USB drive or SD card into the corresponding slot on the side of the TV.
- Press the INPUT button on the remote or TV until you select USB or SD.
- Use the navigation buttons to browse your files and press ENTER/OK to play.
Troubleshooting
If you encounter issues, refer to the following common problems and solutions.
| Problem | Possible Solution |
|---|---|
| No Power | Ensure the power adapter is securely connected and the power outlet is functional. Check if the internal battery is charged. |
| No Signal / Poor Picture Quality | Check antenna connection. Reposition the antenna for better reception. Perform a channel auto scan again. Ensure you are in an area with digital TV broadcast coverage. |
| No Sound | Check volume level. Ensure Mute is not activated. Check audio cables if using external speakers. |
| USB/SD Media Not Playing | Ensure the USB drive or SD card is inserted correctly. Verify that the media files are in supported formats. Check if the USB drive/SD card is formatted correctly (FAT32 recommended). |
| Remote Control Not Working | Check and replace batteries. Ensure there are no obstructions between the remote and the TV's IR sensor. |
Specifications
Key technical specifications for the DenyDan 10-inch Portable Digital TV.
Image: Display dimensions and key performance metrics.
| Feature | Detail |
|---|---|
| Model Number | ATSC10T |
| Screen Size | 10 Inches |
| Display Technology | LED |
| Resolution | 720p (1270 x 720) |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:10, 4:3 |
| Viewing Angle | 170 degrees |
| Brightness | 300cd/m2 |
| Contrast Ratio | 1000:1 |
| Connectivity | HDMI, USB, AV Input/Output, 3.5mm Audio Jack, Antenna |
| Power Input | 12V/24V DC, 110V AC |
| Battery | 4000mAh Rechargeable Lithium Battery (up to 8 hours) |
| Output Wattage | 10 Watts |
| Product Dimensions | 0.8"D x 10.6"W x 6.2"H (2.8 cm x 27 cm x 15.7 cm) |
| Item Weight | 2.2 pounds (1000 Grams) |
| Special Features | Built-In Speaker, Flat Design, Sleep Timer, Hotel Mode, FM Radio, Personal Video Recorder |
Warranty and Customer Support
DenyDan is committed to providing a seamless experience with your portable TV. For any questions, installation assistance, or troubleshooting not covered in this manual, our professional customer support team is available 24/7 to assist you.
Please refer to your product packaging or the official DenyDan website for specific warranty details and contact information.