Dreo DR-HSH017AS
Dreo Smart Wall Heater Instruction Manual
Model: DR-HSH017AS
Introduction
This manual provides essential information for the safe and efficient operation of your Dreo Smart Wall Heater. Please read it thoroughly before installation and use, and retain it for future reference.
The Dreo Smart Wall Heater, featuring a digital display, remote control, and smartphone app connectivity.
Important Safety Information
Your Dreo Smart Wall Heater is designed with multiple safety features. Always adhere to the following guidelines to prevent injury or damage:
- Equipped with an ALCI plug for enhanced electrical safety.
- Constructed with 5VA flame-retardant materials.
- Features overheat protection to automatically shut off if internal temperatures become too high.
- IP24 waterproof rating makes it suitable for use in damp environments like bathrooms, but it is not submersible.
- Features a Child-Lock function to prevent accidental changes to settings.
- Ensure proper ventilation and do not block air inlets or outlets.
- Do not operate with a damaged cord or plug.
- Always plug directly into a wall outlet. Do not use extension cords.
Overview of the multi-layer protection features integrated into the Dreo Smart Wall Heater for safe operation.
Package Contents
Upon opening the package, verify that all items are present and in good condition:
- Dreo Wall Heater DR-HSH017AS
- Remote Control
- Accessory Package (includes mounting brackets, screws, and drywall anchors)
- User Manual (this document)
- Quick Start Guide
Product Overview
The Dreo Smart Wall Heater features a sleek design with intuitive controls.
Control Panel & Display:
- Digital Display: Shows current temperature and mode.
- Wi-Fi Indicator: Shows connectivity status.
- Timer Button: Sets the auto-off timer.
- Minus (-) Button: Decreases temperature or timer setting.
- Plus (+) Button: Increases temperature or timer setting.
- Mode Button: Cycles through heating modes (H1, H2, H3, ECO) and fan-only mode.
- Power Button: Turns the unit on/off.
Adjustable Airflow:
The heater features a 30° manual adjustment (15° up and down) for precise airflow direction, allowing you to direct warmth where it's needed most.
The heater is designed to warm up spaces effectively with its adjustable airflow.
Setup and Installation
The Dreo Smart Wall Heater is designed for easy wall-mounted installation. A drilling template is included to simplify the process.
- Choose Location: Select a suitable wall location, ensuring it is near a power outlet and away from flammable materials. The power cord is 70.8 inches long.
- Mark Drilling Points: Use the provided drilling template to mark the precise locations for the mounting screws on the wall. The template includes a built-in level for accuracy.
- Drill Holes: Drill holes at the marked points. Insert the provided drywall anchors if drilling into drywall.
- Attach Brackets: Secure the two mounting brackets to the wall using the provided screws. An extra screw is included.
- Mount Heater: Carefully align the heater with the mounted brackets and slide it into place.
- Cable Management: Utilize the cable winding feature on the back of the heater to manage any excess power cord, ensuring a neat and secure installation.
An instructional video is available to guide you through the installation process step-by-step.
The back of the heater features a fan and a convenient cable recess for managing the power cord.
Operating Instructions
Your Dreo Smart Wall Heater offers various modes and control options for optimal comfort.
Powering On/Off:
Press the Power button on the unit or remote control to turn the heater on or off.
Adjusting Modes:
Use the Mode button to cycle through the following settings:
- H1 (Low Heat): 900 Watts
- H2 (Medium Heat): 1300 Watts
- H3 (High Heat): 1500 Watts
- ECO Mode: Functions like a thermostat, maintaining a set temperature between 41°F and 95°F. The heater will adjust its power output to maintain the desired temperature, offering energy savings.
- Fan-Only Mode: Circulates air without heating, useful for warmer seasons.
The heater allows precise temperature control within a range of 41°F to 95°F.
Temperature Control:
In ECO mode, use the Plus (+) and Minus (-) buttons on the unit or remote to set your desired temperature. The heater will automatically adjust to maintain this temperature within a 2°F fluctuation.
Timer Function:
Set an auto-off timer for up to 24 hours using the Timer button. This allows you to program the heater to turn off automatically after a set period.
Smart Control (Wi-Fi & App):
The Dreo Smart Wall Heater can be controlled via the DREO app or voice commands through Alexa. Connect the heater to your Wi-Fi network (takes approximately 5 seconds) to enable these features. This allows you to control the heater remotely, set schedules, and monitor its status from your smartphone.
Control your Dreo Smart Wall Heater conveniently from anywhere using the DREO app or voice assistants like Alexa.
Mute & Display Off:
- Mute Function: Press the mute button on the remote control to silence button presses and alerts, ideal for use in bedrooms at night.
- Display Off: Press the display off button on the remote to turn off the digital display, leaving only a small red indicator light to show it's plugged in.
Child Safety Lock:
To activate the child safety lock, press and hold the Plus (+) and Minus (-) buttons on the unit's control panel for 3 seconds. This will disable the control panel, preventing accidental changes to settings. Repeat the process to unlock.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Dreo Smart Wall Heater.
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Periodically clean the air inlet and outlet grilles with a vacuum cleaner or soft brush to remove dust and debris.
- Store the heater in a cool, dry place when not in use, preferably in its original packaging.
Troubleshooting
If you encounter issues with your Dreo Smart Wall Heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in, power outlet issue, overheat protection activated, child lock engaged. | Ensure the ALCI plug is fully inserted and reset if tripped. Check the power outlet. Allow the heater to cool down. Deactivate child lock by holding + and - buttons for 3 seconds. |
| Heater stops heating unexpectedly. | Overheat protection, tip-over switch activated, ECO mode reached set temperature. | Allow the heater to cool. Ensure the heater is on a stable, flat surface. In ECO mode, this is normal behavior once the room reaches the set temperature. |
| Display shows an error code. | Internal malfunction. | Unplug the heater for 10 minutes, then plug it back in. If the error persists, contact customer support. |
| Remote control not working. | Dead batteries, obstruction, remote out of range. | Replace batteries. Remove any obstructions between the remote and the heater. Ensure you are within effective range. |
| Wi-Fi connectivity issues. | Incorrect Wi-Fi password, router issues, distance from router. | Double-check Wi-Fi password. Restart your router. Move the heater closer to the router. Refer to the DREO app for specific pairing instructions. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Dreo |
| Model Number | DR-HSH017AS |
| Power Output | 900W (H1), 1300W (H2), 1500W (H3) |
| Voltage | 120 Volts |
| Temperature Range | 41°F - 95°F |
| Oscillation | 30° Manual Adjustment (15° up/down) |
| Waterproof Rating | IP24 |
| Dimensions (D x W x H) | 4.53"D x 16.02"W x 12.2"H |
| Item Weight | 8.38 pounds |
| Power Cord Length | 70.8 inches |
| Special Features | Digital Display, Adjustable Temperature, Fast Heating, Weatherproof, Wi-Fi Enabled, ALCI Plug, Overheat Protection, Child Lock, 24H Timer |
Warranty and Support
Dreo provides a standard warranty for this product. For detailed warranty information, product registration, or technical support, please visit the official Dreo website or contact their customer service team. Keep your purchase receipt as proof of purchase.
You can also visit the Dreo Store on Amazon for more products and information.
Related documentsDR-HSH017AS
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.