Introduction
This manual provides detailed instructions for the installation and use of the Tjyuze Wall/Ceiling Mount, designed specifically for Samsung The Freestyle Projector models SP-LSP3BLA (1st Gen) and SP-LFF3CLA (2nd Gen). Please read these instructions carefully before installation to ensure proper setup and safe operation.
Product Compatibility
This mount is compatible with the following Samsung Freestyle Projector models:
- SP-LSP3BLA (1st Gen)
- SP-LFF3CLA (2nd Gen)
- SP-LSP3BLAXXL
- SP-LFF3CLAXXXY
- SP-LFF3CLAXXXP
- SP-LFF3CLAXXZA
Figure 1: Compatibility overview. The mount is designed for specific Samsung Freestyle Projector models (1st and 2nd Gen). Other projector models may not fit.
Figure 2: Applicable mounting locations. The bracket can be installed on walls, ceilings, or other suitable surfaces.
Safety Information
- Always ensure the mounting surface is structurally sound and can support the weight of the mount and projector.
- Use appropriate tools and follow all installation steps carefully.
- Screw installation is recommended for maximum stability and safety. Adhesive methods are not advised due to potential failure from temperature and humidity fluctuations.
- Keep small parts away from children.
Figure 3: Installation method comparison. Screw installation provides superior stability compared to adhesive methods, which can be affected by environmental factors.
Package Contents
Verify that all components are present before beginning installation:
- 1x Projector Wall/Ceiling Mount
- 4x Screws (6x30mm)
- 4x Wall Anchors
Figure 4: Package contents. Includes the main mount, screws, and wall anchors for secure installation.
Specifications
| Material | High-quality Steel |
| Color | White |
| Load Capacity | Up to 50 kg (110 lbs) |
| Mounting Type | Wall Mount, Ceiling Mount |
| Compatible Devices | Samsung Freestyle Projector (1st & 2nd Gen) |
| Dimensions (Mount) | Approx. 4.72 inches (diameter) |
| Item Weight | 12.3 ounces |
Figure 5: Product dimensions. Detailed measurements of the mount and fastening hardware.
Figure 6: Material and load capacity. The mount is constructed from high-quality steel, ensuring durability and a high load-bearing capacity.
Installation Guide
Follow these steps for secure installation of your Tjyuze Projector Mount:
- Prepare the Mounting Surface: Choose a suitable location on a wall or ceiling. Ensure the surface is clean and free of obstructions. Use a stud finder if mounting to drywall to locate a stud for maximum security, or ensure you are using appropriate anchors for your wall type.
- Mark Drill Holes: Place the mount against the desired surface and use a pencil to mark the four drill hole locations.
- Drill Pilot Holes: Using an appropriate drill bit for your wall anchors (typically 6mm for the provided anchors), drill pilot holes at the marked locations.
Step 3.1: Drilling pilot holes.
- Insert Wall Anchors: Gently tap the plastic wall anchors into the drilled holes until they are flush with the surface.
Step 4.1: Inserting wall anchors.
- Secure the Mount: Align the mount with the anchors and use the provided screws to firmly attach the mount to the wall or ceiling. Tighten the screws until the mount is secure, but do not overtighten.
Step 5.1: Securing the mount.
- Attach the Projector: Carefully slide your Samsung Freestyle Projector into the mount. Ensure it is seated correctly and feels stable.
Step 6.1: Attaching the projector to the mount.
- Final Check: Gently test the stability of the mounted projector. Ensure there is no wobbling or looseness.
Step 6.2: Projector securely mounted.
Figure 7: Comprehensive installation steps visual guide.
Operating and Adjustment
Once installed, the mount allows for flexible positioning of your projector:
- Angle Adjustment: The Samsung Freestyle Projector itself can be rotated up to 180 degrees within the mount, allowing you to project onto walls, ceilings, or floors.
- Positioning: The mount provides a fixed base. Any angle adjustments are made directly on the projector's integrated stand.
Figure 8: Flexible projection angles. The projector can be rotated 180 degrees to project onto various surfaces.
Maintenance
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Periodic Check: Periodically inspect the mount and screws to ensure they remain tight and secure. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Projector feels unstable or wobbly after mounting. | Screws are not fully tightened, or anchors are not properly seated. Mounting surface may be weak. | Ensure all screws are securely tightened. Verify that the wall anchors are appropriate for your wall type and installed correctly. If mounting to drywall without a stud, consider relocating to a stud or using heavy-duty drywall anchors. |
| Projector slides out of the bracket due to vibration. | Lack of a locking mechanism for the projector within the mount. | While the mount is designed for a snug fit, in environments with significant vibration, consider adding a small, non-permanent adhesive pad or rubber strip to the bottom of the projector where it rests in the mount to increase friction. Regularly check the projector's position. |
| Mount does not fit the projector. | Incompatible projector model. | Verify your projector model against the compatible models listed in the "Product Compatibility" section. This mount is specifically designed for Samsung Freestyle Projector (1st and 2nd Gen) models. |
Customer Support
For further assistance or inquiries, please contact Tjyuze customer support through the retailer's platform where the product was purchased. Please have your purchase details and product model information ready.
