RELAX4LIFE Round Outdoor Daybed with Canopy Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, setup, operation, and maintenance of your RELAX4LIFE Round Outdoor Daybed with Canopy. Please read this manual thoroughly before assembly and use to ensure safe and correct operation and to prolong the life of your product.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the daybed on a soft, non-abrasive surface to prevent scratches.
• Always place the outdoor daybed on a flat, stable surface to prevent tipping.
• Keep children and pets away from the assembly area.
• Do not exceed the maximum weight capacity: Round Table: 220 lbs, Each Fan-shaped Sofa: 400 lbs, Half-moon Sofa: 800 lbs.
• Keep cushions dry to ensure longevity. Store indoors during inclement weather.
• Avoid exposing the product to extreme temperatures or harsh chemicals.

Package Contents

Verify that all components listed below are included in your package:

• 1 x Outdoor Daybed with Canopy
• 4 x Seat Cushions
• 1 x Round Cushion
• 2 x Throw Pillows
• 1 x Instruction Manual

Assembly Instructions

Assembly is required for this product. It is recommended that two people assemble the daybed, with an estimated assembly time of 60-90 minutes. An Allen wrench is recommended for assembly instead of an electric drill to prevent overtightening.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent damage.
2. Initial Fastening: When attaching pieces, loosen screws by 50% initially. This allows for adjustment and alignment of all holes before fully tightening.
3. Align Holes: Ensure all holes are perfectly aligned before proceeding to tighten any screws.
4. Tighten All Screws: Once all components are in place and holes are aligned, gradually tighten all screws until secure. Do not overtighten.
5. Attach Canopy: Follow the specific instructions provided in the included manual for attaching the retractable canopy mechanism.
6. Place Cushions: Position the seat cushions, round cushion, and throw pillows onto the daybed frame.

Setup and Configuration

Your daybed offers versatile configurations to suit your outdoor space and needs.

Daybed Configuration

To use as a full round daybed, ensure all sectional pieces are pushed together to form a complete circle. The round cushion can be placed in the center or removed as desired.

Conversation Set Configuration

The daybed can be transformed into a modular conversation set. Separate the fan-shaped sofa sections and the half-moon sofa section. The central round ottoman can be used as a coffee table by removing its cushion.

• Use the included 6 patio furniture clips to secure the sectional pieces together in your desired arrangement.

Operating Instructions

Retractable Canopy Operation

The daybed features a retractable canopy for adjustable shade. To extend or retract the canopy, gently push or pull the canopy frame. The gas strut mechanism will assist in smooth movement. Ensure the canopy is fully extended or retracted to prevent damage in windy conditions.

Cushion Usage

The daybed comes with soft seat cushions and throw pillows for comfort. The seat cushions have fixing ties to prevent them from slipping. The cushion covers are removable via zippers for easy cleaning.

Maintenance

Cushion Care

• The cushion covers are removable and washable. Use a mild detergent and cold water for cleaning. Air dry only.
• Always keep the cushions dry to prevent mold, mildew, and damage. Store cushions indoors during rain or extended periods of non-use.

Rattan Frame Care

• Clean the PE rattan frame with a soft cloth and mild soap and water. Rinse thoroughly and dry completely.
• Avoid using abrasive cleaners or brushes that could damage the rattan.

Canopy Care

• Wipe the canopy fabric with a damp cloth and mild soap. Allow to air dry completely before retracting or storing.
• Ensure the canopy is clean and dry before storing to prevent mildew.

Troubleshooting

• Difficulty Aligning Holes During Assembly: If holes do not align, ensure all screws are only partially tightened (50% loose) until all pieces are in place. Then, gently adjust the components to align the holes before fully tightening.
• Canopy Not Retracting/Extending Smoothly: Check for any obstructions in the canopy mechanism. Ensure the gas struts are clean and free of debris. Do not force the canopy.
• Cushions Slipping: Ensure the fixing ties on the cushions are securely fastened to the daybed frame.
• Stability Issues: Verify that the daybed is placed on a completely flat and level surface. Check that all assembly screws are fully tightened.

Specifications

Warranty and Support

This RELAX4LIFE product comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the documentation included in your package or contact RELAX4LIFE customer service directly.

For further assistance, you may visit the official RELAX4LIFE store on Amazon: RELAX4LIFE Store.