1. Introduction
The MOOKA PR1 Air Purifier is designed to improve indoor air quality by effectively removing various airborne pollutants. Featuring a multi-stage filtration system, including a washable pre-filter, PM2.5 sensor, and specialized modes for pets, this device is suitable for large rooms up to 2200 sq.ft. This manual provides essential information for the safe and efficient operation and maintenance of your air purifier.
Image 1.1: The MOOKA PR1 Air Purifier, designed for home use, shown next to a dog, illustrating its effectiveness in pet-friendly environments.
2. Safety Instructions
Please read all safety instructions carefully before using the appliance to prevent injury or damage.
- Always unplug the air purifier before moving, cleaning, or performing any maintenance.
- Do not operate the appliance with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
- Keep the air purifier away from water or other liquids. Do not use in wet environments such as bathrooms.
- Ensure the air inlet and outlet are not blocked. Maintain at least 15 cm (6 inches) clearance from walls and furniture.
- Do not insert fingers or foreign objects into the air inlets or outlets.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Use only MOOKA official replacement filters.
3. Product Components
The MOOKA PR1 Air Purifier consists of the main unit, a multi-layer filter, and a control panel.
- Main Unit: Houses the fan, motor, and air quality sensor.
- Control Panel: Located on the top of the unit, with touch-sensitive buttons and a digital display.
- Filter Compartment: Located at the back/bottom for filter installation and replacement.
Image 3.1: An internal diagram of the air purifier, highlighting the high CADR, quiet operation, and extra-large fan for efficient air circulation.
4. Setup
4.1 Unpacking
- Carefully remove the air purifier from its packaging.
- Remove all plastic wrapping from the unit and the filter.
4.2 Filter Installation
The filter comes pre-installed but is wrapped in plastic for protection during shipping. This plastic must be removed before first use.
- Turn the air purifier upside down or open the back cover (depending on model design).
- Twist the filter cover counter-clockwise to unlock and remove it.
- Take out the filter and remove the plastic bag.
- Place the filter back into the unit, ensuring it is seated correctly.
- Replace the filter cover and twist clockwise to lock it securely.
4.3 Placement
For optimal performance, place the air purifier on a flat, stable surface in the room where purification is desired. Ensure there is adequate space around the unit for proper airflow.
Image 4.1: The MOOKA PR1 Air Purifier positioned in a spacious living area, demonstrating its capability to purify air in large rooms up to 2200 sq.ft.
5. Operating Instructions
Familiarize yourself with the control panel and its functions.
5.1 Power On/Off
- Plug the power cord into a suitable electrical outlet.
- Press the Power button to turn the unit on or off.
5.2 Fan Speed Modes
The air purifier offers 6 adjustable fan speed modes:
- Sleep Mode: Operates at the lowest fan speed (26dB) for quiet operation during rest.
- I, II, III: Manual fan speed settings from low to high.
- Auto Mode: The fan speed automatically adjusts based on the detected air quality.
- Pet Mode: Increases purification effect to capture pet hair and odors faster.
Press the Speed button to cycle through the available modes.
Image 5.1: The MOOKA PR1 Air Purifier with a dog, emphasizing the 'Pet Mode' feature on the control panel, designed for pet owners.
Image 5.2: The air purifier operating quietly in a bedroom at 26dB, indicating its suitability for undisturbed sleep.
5.3 Air Quality Display
The PR1 is equipped with a PM2.5 sensor that displays real-time air quality levels on the screen. The indicator light changes color to reflect air quality:
- Green: Good air quality (0-75 PM2.5)
- Orange: Moderate air quality (76-150 PM2.5)
- Red: Poor air quality (>150 PM2.5)
Upon powering on, the air purifier enters a preheating state, and the indicator light will flash for approximately one minute before displaying the current air quality.
Image 5.3: The air quality sensor display on the MOOKA PR1, showing PM2.5 levels and their corresponding color-coded air quality ratings.
5.4 Timer Function
The timer allows you to set the air purifier to operate for a specific duration before automatically turning off.
- Press the Timer button to select desired operating hours (e.g., 2H, 5H, 8H).
5.5 Child Lock
The Child Lock feature prevents accidental changes to settings.
- Press and hold the Child Lock button for 3 seconds to activate or deactivate.
5.6 Aroma Function
The air purifier includes an aroma function to diffuse essential oils.
- Locate the aroma pad compartment.
- Add a few drops of essential oil to the aroma pad. For first-time use, moisten the pad with more essential oil.
- Close the compartment.
Image 5.4: A user adding essential oils to the aroma diffuser compartment of the air purifier, demonstrating the aromatherapy feature.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your air purifier.
6.1 Washable Pre-Filter Cleaning
The pre-filter can be cleaned to maintain efficiency.
- Unplug the air purifier.
- Remove the pre-filter (refer to Filter Installation section).
- Rinse the pre-filter under running water to remove accumulated pet hair and dust.
- Allow the pre-filter to air dry completely in the shade before re-installing.
Image 6.1: The washable pre-filter, illustrating its ability to capture pet hair and the ease of cleaning under water.
6.2 Filter Replacement
The air purifier has a filter replacement reminder function. The filter indicator light will illuminate when it's time to replace the filter.
- Recommended replacement frequency: Every 3-6 months for optimal purification.
- To reset the filter reminder: After replacing the filter, press and hold the Filter Reset button for 3 seconds.
- Replacement filter model: Search for B0DD3ZZ7ZV.
Image 6.2: The 'Pet Owners Choice' filter, designed to effectively filter pet dander, fluff, pollen, and absorb unwanted odors.
6.3 Sensor Cleaning
Regularly clean the PM2.5 sensor to maintain accurate air quality readings.
- The air quality sensor is located on the left back position of the unit.
- Gently wipe the sensor opening with a dry cotton swab or soft cloth to remove any dust accumulation.
7. Troubleshooting
This section addresses common issues you might encounter.
7.1 Why does the screen show 005 air quality?
If the screen consistently displays '005' or an unexpectedly low reading, consider the following:
- Sensor Location: The air quality sensor is located on the left back position of the unit. Ensure this area is not obstructed.
- Sensor Cleanliness: Dust accumulation on the sensor can affect its accuracy. Refer to Section 6.3 for sensor cleaning instructions.
- Preheating: After powering on, the air purifier is in a preheating state for about one minute, during which the indicator light flashes. Wait for this process to complete for accurate readings.
- Environmental Factors: In very clean environments, a low reading is normal.
7.2 Unit Not Turning On
- Check if the power cord is securely plugged into both the unit and the electrical outlet.
- Ensure the electrical outlet is functioning by testing it with another appliance.
7.3 Poor Air Purification
- Check if the filter's plastic packaging has been removed.
- Ensure the filter is correctly installed and not clogged. Replace if necessary (refer to Section 6.2).
- Verify that the air inlet and outlet are not obstructed.
- Select an appropriate fan speed or Auto/Pet mode for the room size and air quality.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | PR1 |
| Product Dimensions | 12.3"D x 6.4"W x 16.3"H |
| Weight | 8.93 Pounds |
| Floor Area Coverage | Up to 2200 Square Feet |
| Noise Level (Sleep Mode) | 26 dB |
| Color | White |
| Certifications | CARB, ETL, DOE, FCC |
| Ozone Release | No |
| UV Light | No |
9. Warranty and Support
MOOKA products are designed for long-term use and safety. This product is backed by authoritative certifications.
- For any questions or concerns regarding your MOOKA PR1 Air Purifier, please contact MOOKA customer support.
- Refer to your purchase documentation for specific warranty details.
