Introduction
This manual provides instructions for the installation and maintenance of your kwmobile replacement ear pads. These ear pads are designed to restore comfort and sound quality to your compatible Sennheiser headphones.
Product Overview
Image: A pair of black kwmobile replacement ear pads, showcasing their design and texture.
The kwmobile replacement ear pads are crafted from durable synthetic leather on the exterior and soft foam on the interior, ensuring a comfortable fit and clear audio experience. This set includes two replacement ear pads.
Compatibility
These replacement ear pads are compatible with the following Sennheiser headphone models:
- Sennheiser HD418
- Sennheiser HD419
- Sennheiser HD428
- Sennheiser HD429
- Sennheiser HD448
- Sennheiser HD449
Image: Visual representation of a compatible Sennheiser headphone model, confirming the listed compatibility.
Note:
Before installation, carefully observe the make and condition of your specific headphone model and the existing ear cushions to ensure proper replacement.
Installation Instructions
Replacing your old ear pads with the new kwmobile ear pads is a straightforward process. Follow these steps:
- Remove Old Ear Pads: Gently peel off or unclip the existing ear pads from your Sennheiser headphones. Some models may require a slight twist or pull. Be careful not to damage the headphone's speaker or mounting mechanism.
- Clean Headphone Surface: Once the old ear pads are removed, clean any dust or debris from the headphone's ear cup surface where the new pads will attach.
- Align New Ear Pads: Take one kwmobile replacement ear pad. Carefully align its edges with the appropriate brackets or grooves on the headphone's ear cup.
- Attach Ear Pads: Press the ear pad firmly around the ear cup, ensuring it is securely seated and all edges are properly attached. Work your way around the circumference until the pad is fully installed.
- Repeat for Second Ear Pad: Follow the same steps for the other ear pad.
Image: A close-up view of the foam pads, illustrating their soft texture and design for comfort.
Maintenance
To ensure the longevity and hygiene of your kwmobile replacement ear pads, follow these maintenance guidelines:
- Regular Cleaning: Wipe the surface of the ear pads periodically with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the synthetic leather.
- Avoid Moisture: Do not submerge the ear pads in water. If they become wet, gently pat them dry with a clean cloth and allow them to air dry completely before use.
- Storage: When not in use, store your headphones in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
Specifications
| Brand | kwmobile |
| Compatible Devices | Sennheiser HD418, HD419, HD428, HD429, HD448, HD449 Headphones |
| Material | Synthetic Leather (exterior), Soft Foam (interior) |
| Color | Black |
| Unit Count | 2 Ear Pads |
| Product Dimensions (approx.) | 3.94 x 3.15 x 0.28 inches (10 x 8 x 0.7 cm) |
| Item Weight (approx.) | 0.705 ounces (20 grams) |
Image: An ear pad with measurements (8 cm width, 6 cm inner length, 10 cm outer length) to illustrate its size.
Troubleshooting
If you encounter any issues during or after installation, consider the following:
- Ear Pad Not Fitting: Double-check that your headphone model is listed under the compatible devices. Ensure you are aligning the ear pad correctly with the headphone's mounting points.
- Discomfort After Installation: Allow a short period for the new ear pads to conform to your ears. If discomfort persists, verify that the pads are installed evenly and without creases.
- Sound Quality Issues: Ensure the ear pads are fully sealed around the ear cups. A poor seal can affect sound isolation and bass response.
Support
For further assistance or inquiries regarding your kwmobile product, please refer to the official kwmobile website or contact their customer support directly.
You can visit the kwmobile store on Amazon for more information: kwmobile Amazon Store