Product Overview
The INKEE GC30 is a portable, inflatable RGB LED tube light designed for versatile photography and videography. It features a unique inflatable design for portability, a wide color temperature range, full RGB color adjustment, and a built-in rechargeable battery. This manual provides essential information for setting up, operating, and maintaining your device.
What's in the Box
- Storage Bag
- Air Tube Light
- A-to-C Charging Cable
- Magnetic Stand
- Air Blow (Manual Air Pump)
Image: Contents of the INKEE GC30 package.
Setup Instructions
- Inflation: Locate the air valve on the light tube. Use the provided manual air pump or blow into the valve to inflate the tube. Inflation takes approximately one minute.
Image: Inflating the INKEE GC30 tube light.
- Power On: Press and hold the power button on the control panel until the screen illuminates.
Image: Control panel with power button and display.
- Mounting: Utilize the 3 powerful N52 magnets on the light for attachment to iron surfaces. For tripod compatibility, use the magnetic mounting adapter (1/4" screw).
Operating Instructions
- Adjusting Brightness: Use the dedicated brightness control buttons on the display panel to increase or decrease the light intensity. The display shows the current brightness percentage.
- Color Temperature Adjustment: The GC30 offers a wide color temperature range of 2000-10000K. Use the 'K-' and 'K+' buttons to adjust the color temperature from warm to cool white.
Image: Ultra-wide range of adjustable color temperature (2000K-10000K).
- Full-Color RGB Mode: Access 360° full-color adjustment to select from endless color options. Adjust hue, saturation, and brightness to achieve desired lighting effects for any scene.
Image: Full color RGB mode for diverse lighting.
- Special Effects: The GC30 includes 16 cool special effects. Refer to the on-screen display for navigation and selection of these effects.
Image: 16 cool special effects for creative video.
Battery and Charging
The INKEE GC30 is equipped with a built-in 36Wh/5000mAh rechargeable lithium battery. It supports 30W fast charging and discharging, allowing for a full charge in approximately 90 minutes. At 100% brightness, the light offers up to 70 minutes of runtime.
Charging: Connect the provided A-to-C Charging Cable to the USB-C port on the device and to a compatible power source. The display will indicate charging status.
Note: The tube may heat up when running at full power with low battery, but this will not damage the light.
Image: Built-in 36Wh lithium battery with charging and runtime details.
Maintenance
- Water Resistance: The GC30 is waterproof. Ensure the charging port's silicone cover is securely closed when exposed to water or moisture.
- Cleaning: Wipe the exterior of the light with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, deflate the light tube and store it in the provided storage bag to protect it from dust and damage.
Image: Fully waterproof design for outdoor use.
Troubleshooting
- Light not turning on: Ensure the battery is charged. Press and hold the power button for a few seconds to activate.
- Inconsistent light output: Check battery level. If the light is deflated, ensure it is fully inflated for optimal diffusion.
- Overheating: It is normal for the tube to heat up at full power with low battery. If overheating persists or is excessive, discontinue use and contact support.
Specifications
| Feature | Detail |
|---|---|
| Power | 30W |
| Material | TPU |
| CRI | ≥95 (CRI 97/TLCI 98) |
| Waterproof Level | IP6X (Waterproof) |
| Light Effect Modes | 16 |
| Magnet | N52*3 |
| Weight | ≈370g |
| Battery Capacity | 36Wh 7.2V 5000mAh |
| Length | 35.5 inches (90cm) |
| Color Temperature Range | 2000-10000K |
| Connectivity Technology | USB |
Official Product Videos
INKEE GC30 30W RGB Handheld LED Tube Light
Video: Official product overview of the INKEE GC30 RGB Handheld LED Tube Light.
Warranty and Support
The INKEE GC30 comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please refer to the manufacturer's official website or contact their customer service directly. Contact information can typically be found on the product packaging or the INKEE official website.