TREKURE 10-in-1 Jump Starter with Air Compressor User Manual

Introduction

Thank you for choosing the TREKURE 10-in-1 Jump Starter with Air Compressor. This versatile device combines a powerful 6000A jump starter, a 160 PSI air compressor, a 45W fast-charging power bank, and a 600 lumen LED emergency light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and emergency lighting. Please read this manual thoroughly before use to ensure proper operation and maximize the lifespan of your device.

Safety Information

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle.

• Do not operate the jump starter if the cables or clamps are damaged.
• Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative). Reverse polarity can cause damage.
• Do not jump start a frozen battery.
• Keep the device away from children.
• Do not expose the device to rain or extreme temperatures.
• Use the device in a well-ventilated area.
• Wear eye protection when jump starting a vehicle.
• Do not disassemble the unit. Refer all servicing to qualified personnel.
• The included insulated gloves are for emergency and professional tasks, providing protection up to 400V.

Package Contents

Please check the package for the following items:

• TREKURE Beta07 Jump Starter with Air Compressor
• Smart Jumper Clamps
• Air Hose with Nozzles (for various inflatables)
• USB-C Charging Cable
• Insulated Gloves
• User Manual
• Storage Case

Product Overview

Figure 1: Front view of the TREKURE Beta07 Jump Starter showing the large display, control buttons, and integrated air hose.

The TREKURE Beta07 features a robust design with an intuitive interface.

• Large 3.3-inch LCD Display: Shows battery level, pressure readings, and operational status.
• Power Button: Turns the device on/off.
• Boost Button: For forced jump starting.
• Air Compressor Controls: Buttons for inflation mode selection (+/-), unit selection (M), and start/stop (U).
• USB-C Port (PD 45W In/Out): For fast charging the device and external devices.
• USB-A Ports (2 x 18W Out): For charging other electronic devices.
• Jump Start Port: For connecting the smart jumper clamps.
• Air Hose Port: For connecting the air hose.
• LED Light: Multi-mode emergency light.

Charging the Device

Figure 2: The TREKURE Beta07 connected to a power source via its USB-C PD 45W port for rapid charging.

Before first use, fully charge the TREKURE Beta07. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C (PD 45W In/Out) port on the jump starter.
2. Connect the other end of the USB-C cable to a compatible 45W PD wall charger (not included) or a suitable USB power adapter.
3. The LCD display will show the charging progress. The device can charge from 0% to 80% in approximately 1 hour with a 45W charger.
4. Once fully charged, the display will indicate 100%. Disconnect the charging cable.

Setup

The TREKURE Beta07 is designed for ease of use. No complex setup is required beyond initial charging. Ensure all accessories are present and in good condition before operation.

• Verify the device is fully charged.
• Familiarize yourself with the ports and buttons as described in the "Product Overview" section.
• Keep the smart jumper clamps and air hose readily accessible.

Operating Instructions

1. Jump Starting a Vehicle

Figure 3: The TREKURE Beta07 connected to a vehicle battery, ready to jump start.

The TREKURE Beta07 can jump start most 12V vehicles (up to all gasoline engines or 12.0L diesel engines).

1. Ensure the jump starter is at least 50% charged.
2. Turn off the vehicle's ignition and all accessories.
3. Connect the red (+) clamp of the smart jumper cable to the positive (+) terminal of the vehicle's battery.
4. Connect the black (-) clamp to the negative (-) terminal of the vehicle's battery.
5. Plug the smart jumper cable connector into the jump start port on the TREKURE Beta07. The display will show "Ready" or similar indication.
6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
7. Once the vehicle starts, immediately disconnect the smart jumper cable from the jump starter, then disconnect the black (-) clamp, followed by the red (+) clamp from the vehicle battery.
8. If the battery is completely dead, you may need to use the "BOOST" function. Press and hold the "BOOST" button until the display indicates "Forced Start" or similar. Then proceed with starting the vehicle.

2. Using the Air Compressor (Tire Inflator)

Figure 4: The TREKURE Beta07 connected to a car tire, demonstrating its inflation capability.

The integrated 160 PSI air compressor can inflate tires and other inflatables quickly.

1. Connect the air hose to the air hose port on the TREKURE Beta07.
2. Attach the appropriate nozzle to the air hose and connect it securely to the item you wish to inflate (tire valve, ball, etc.).
3. Turn on the device. The display will show the current pressure.
4. Press the 'M' button to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball, Custom).
5. Use the '+' and '-' buttons to set the desired pressure.
6. Press the 'U' button (Start/Stop) to begin inflation. The compressor will automatically stop once the preset pressure is reached.
7. Disconnect the air hose and store it properly.

3. Using as a Power Bank

Figure 5: The TREKURE Beta07 simultaneously charging a smartphone and a tablet via its USB output ports.

The TREKURE Beta07 can charge your electronic devices with its multiple USB output ports.

• USB-C (PD 45W In/Out): Use this port for fast charging compatible laptops, smartphones, and tablets.
• USB-A (2 x 18W Out): Use these ports for charging other USB-powered devices.

Simply connect your device's charging cable to the appropriate port on the TREKURE Beta07, and charging will begin automatically.

4. Using the LED Emergency Lights

Figure 6: The TREKURE Beta07's LED light providing illumination in a dark engine compartment.

The built-in 600 lumen LED light offers four modes for various situations.

• Flashlight: For general illumination.
• Strobe: For signaling or attracting attention.
• Warning (Orange Strobe): For roadside emergencies.
• SOS: For emergency signaling.

To activate the light, press the dedicated light button. Press repeatedly to cycle through the modes.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your TREKURE Beta07.

• Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage case for protection.
• Recharging: Recharge the device every 3-6 months, even if not used, to prevent battery degradation.
• Cable Care: Inspect jumper cables and air hose for any damage before each use. Replace if necessary.

Troubleshooting

Specifications

Warranty and Support

TREKURE offers a 3-year hassle-free return policy and lifetime technical support for the Beta07 Jump Starter.

For any issues or inquiries, please contact TREKURE customer support. You can find contact information on the official TREKURE website or through your purchase platform.

To extend your warranty to three years, register your product on the TREKURE website within 7 days of purchase.