KONKIN BOO 20240805-QY1-261

KONKIN BOO 42V AC Adapter Charger Instruction Manual

Model: 20240805-QY1-261

1. Introduction

This manual provides essential instructions for the safe and efficient use of your KONKIN BOO 42V AC Adapter Charger, model 20240805-QY1-261. This charger is specifically designed for Ancheer 26 Inch Wheel 350W Electric Mountain Bikes equipped with a 36V 10.4Ah Lithium-ion Battery. Please read this manual thoroughly before using the charger to ensure proper operation and to prevent damage to the product or injury.

The KONKIN BOO charger is engineered for high performance and stable output, ensuring reliable power delivery to your e-bike battery.

Image showing the charger with a battery charging icon and text 'LOW LOSS AND HIGH EFFICIENCY'

The charger is designed for low power loss and high efficiency during the charging process.

Image showing the charger with text 'HIGH PERFORMANCE, STABLE DURABLE' and 'STABLE OUTPUT' with a cable being stretched

Illustrates the charger's high performance, durability, and stable output.

2. Safety Information

Your safety is paramount. This charger incorporates several built-in safety features to protect both the device and the user. Always adhere to the following safety guidelines:

The charger features multiple protections:

Diagram illustrating built-in safety protections: Short Circuit Protection, Over Voltage Protection, Over Current Protection, Over Temperature Protection.

Visual representation of the charger's integrated safety mechanisms.

Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Setup

Follow these steps to set up your charger for the first time:

  1. Unpack: Carefully remove the charger from its packaging. Inspect it for any visible damage.
  2. Placement: Place the charger on a stable, flat, and dry surface, away from direct sunlight, heat sources, and flammable materials. Ensure adequate ventilation around the unit.
  3. Connect to Power: Plug the AC power cord into a standard AC 100-240V electrical outlet.
  4. Connect to E-bike: Locate the charging port on your Ancheer 26 Inch Wheel 350W Electric Mountain Bike (36V 10.4Ah Lithium-ion Battery). Insert the round tip connector of the charger firmly into the bike's charging port.

Ensure all connections are secure before proceeding to operation.

4. Operating Instructions

Once the charger is properly set up, follow these steps to charge your e-bike battery:

  1. Initiate Charging: After connecting the charger to both the power outlet and the e-bike battery, the charging process will begin automatically.
  2. Charging Indicator: Observe the indicator light on the charger (if present). Typically, a red light indicates charging in progress, and a green light indicates a full charge or standby mode. Refer to your e-bike's manual for specific battery indicator behavior.
  3. Charging Time: Charging time will vary depending on the battery's current charge level and capacity. Avoid overcharging by disconnecting the charger once the battery is fully charged.
  4. Disconnect: Once charging is complete (indicated by the charger or bike's battery indicator), first unplug the charger from the e-bike's charging port, then unplug the AC power cord from the wall outlet.

Do not leave the charger connected indefinitely after the battery is fully charged.

5. Maintenance

Proper maintenance ensures the longevity and safe operation of your charger:

6. Troubleshooting

If you encounter issues with your charger, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Charger not working / No indicator lightNo power from outlet; Loose connection; Damaged charger.Check power outlet with another device; Ensure all connections are secure; Inspect charger for damage. If damaged, discontinue use.
Battery not chargingIncorrect connection; Battery issue; Charger fault.Verify the charger is correctly plugged into the e-bike; Consult your e-bike manual for battery troubleshooting; If the charger is suspected faulty, contact support.
Charger is hot during useNormal operation; Poor ventilation; Overload.A slight warmth is normal. Ensure adequate ventilation around the charger. If it becomes excessively hot, disconnect immediately and contact support.

If the problem persists after attempting these solutions, please contact KONKIN BOO customer support.

7. Specifications

8. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official KONKIN BOO website. Warranty terms and conditions may vary.

If you require technical assistance, have questions about your charger, or need to report a defect, please contact KONKIN BOO customer support through the retailer where the product was purchased or via the manufacturer's official contact channels.

Manufacturer: KONKIN BOO

Related Documents - 20240805-QY1-261

Preview Legrand Motor Operator for DPX³ Circuit Breakers - Installation and Operation Manual
Comprehensive guide for installing and operating the Legrand motor operator for DPX³ 630 and DPX³ 1600 circuit breakers. Includes control descriptions, operating modes, assembly steps, technical specifications, and safety guidelines.
Preview Trojan Lithium-Ion Charger Compatibility Guide
A comprehensive guide from Trojan Battery Company detailing compatibility between Trojan Lithium-Ion batteries and various charger models, including voltage, wattage, battery profile, and application notes.
Preview KAYOBA Barncykel Bruksanvisning | Modeller 001-255, 001-261, 001-263, 001-264
Officiell bruksanvisning för KAYOBA barncyklar (modeller 001-255, 001-261, 001-263, 001-264). Innehåller säkerhetsanvisningar, monteringsguide, handhavande och underhållstips för säker användning.
Preview Geberit TIA Cleaning Adapter for Wall Drains - Maintenance and Installation Manual
This manual provides detailed maintenance and installation instructions for the Geberit TIA Cleaning Adapter for Wall Drains (Model 972.261.00.0). It includes step-by-step guidance, diagrams explained textually, and essential technical information for proper use and upkeep.
Preview 48Gbps eARC Audio to Amplifier Adapter User Manual
User manual for the NÖRDIC 48Gbps HDMI eARC Audio to Amplifier Adapter (Model HDC-MC02/SGM-261), detailing features, specifications, connections, and operation for 8K audio extraction and amplification.
Preview White Rodgers 1F81-261 & 1F83-261 Configuration and Wiring Diagrams
Configuration menu details and typical wiring diagrams for White Rodgers 1F81-261 and 1F83-261 thermostats. Includes setup options, button functions, and system wiring schematics.