QTHREE RX 590 GME 8G

QTHREE Radeon RX 590 GME Graphics Card User Manual

Model: RX 590 GME 8G

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your QTHREE Radeon RX 590 GME Graphics Card. Please read this manual thoroughly before installation and retain it for future reference.

QTHREE Radeon RX 590 GME Gaming Graphics Card

Image 1.1: QTHREE Radeon RX 590 GME Gaming Graphics Card overview.

2. Package Contents

Verify that all items are present and in good condition upon opening the package:

  • 1 x QTHREE Radeon RX 590 GME Graphics Card

3. System Requirements

Before installing the graphics card, ensure your system meets the following minimum requirements:

  • Motherboard: PCI Express x16 3.0 slot available.
  • Power Supply: Minimum 500W power supply with one 6-pin or 8-pin PCIe power connector.
  • Operating System: Windows 7/10/11 (64-bit recommended). Note: Not compatible with macOS.
  • Case: Standard ATX or larger PC case. Note: Not compatible with Small Form Factor (SFF) cases due to card dimensions.
  • Display: Monitor with DisplayPort, HDMI, or DVI input.

4. Installation

Follow these steps to install your QTHREE Radeon RX 590 GME Graphics Card:

  1. Prepare Your System:
    • Turn off your computer and disconnect the power cable from the wall outlet.
    • Open your computer case.
    • Ground yourself to discharge any static electricity (e.g., by touching a metal part of the case).
  2. Remove Old Graphics Card (if applicable):
    • If you have an existing graphics card, carefully disconnect any power cables and display cables.
    • Unscrew the retaining screw(s) holding the card to the case.
    • Press the PCIe slot retention clip and gently pull the old card straight out of the slot.
  3. Install the New Graphics Card:
    • Locate an available PCI Express x16 slot on your motherboard.
    • Remove the corresponding expansion slot cover(s) from your computer case.
    • Align the graphics card with the PCIe slot and press it firmly and evenly until it is fully seated. You should hear a click from the retention clip.
    • Secure the graphics card to the case with the retaining screw(s).
    QTHREE Radeon RX 590 GME Graphics Card installed in a PC

    Image 4.1: The QTHREE Radeon RX 590 GME Graphics Card, showing its dual-fan design and PCIe connector.

  4. Connect Power:
    • Connect the 6-pin or 8-pin PCIe power cable from your power supply to the corresponding connector on the graphics card. Ensure it is securely connected.
    Close-up of the 8-pin power connector on the RX 590 GME graphics card

    Image 4.2: The 8-pin power connector on the graphics card for external power.

  5. Connect Display Cables:
    • Connect your monitor(s) to the DisplayPort, HDMI, or DVI ports on the graphics card.
    DisplayPort, HDMI, and DVI output ports on the graphics card

    Image 4.3: The output ports (DisplayPort, HDMI, DVI) supporting multi-monitor setups.

  6. Close Case and Power On:
    • Close your computer case and reconnect the power cable.
    • Turn on your computer.

5. Driver Installation

After physical installation, you must install the appropriate drivers for the graphics card to function correctly.

  1. Boot into Operating System: Your computer should boot up, possibly with a basic display driver.
  2. Download Drivers: Navigate to the official AMD website to download the latest drivers for the Radeon RX 590 GME. It is recommended to download the Adrenalin Edition drivers for optimal performance and features.
  3. Install Drivers: Run the downloaded driver installer and follow the on-screen instructions. A system restart may be required after installation.
Screenshot of AMD driver download page for Radeon RX 590

Image 5.1: Example of the AMD support page for downloading Radeon RX 590 series drivers.

6. Operating Instructions

Once drivers are installed, your graphics card is ready for use. The AMD Radeon software provides various settings for optimizing performance, display, and other features.

  • Multi-Monitor Setup: The card supports up to three displays simultaneously. You can configure display settings through your operating system's display settings or the AMD Radeon software.
  • Gaming and Applications: The card is designed for gaming and demanding graphical applications. Ensure your games and software are updated for best compatibility and performance.

7. Maintenance

Proper maintenance can extend the lifespan and performance of your graphics card.

  • Cleaning: Periodically clean dust from the fans and heatsink using compressed air. Ensure the computer is powered off and unplugged before cleaning.
  • Airflow: Ensure adequate airflow within your computer case to prevent overheating. Keep the area around your computer clear of obstructions.
  • Driver Updates: Regularly check the AMD website for updated drivers to ensure optimal performance and stability.
Diagram illustrating the all-aluminum heatsink and heat-pipe design for cooling

Image 7.1: Illustration of the graphics card's cooling system, featuring an all-aluminum heatsink and heat pipes.

8. Troubleshooting

If you encounter issues with your graphics card, refer to the following common troubleshooting steps:

  • No Display:
    • Ensure the monitor is connected to the graphics card, not the motherboard's integrated graphics port.
    • Verify all power cables (including the PCIe power connector) are securely attached.
    • Reseat the graphics card in its PCIe slot.
    • Test with a different display cable or monitor.
  • Driver Issues:
    • If you experience crashes or graphical anomalies, ensure you have the latest drivers installed from the official AMD website.
    • Consider using a driver uninstaller utility (e.g., DDU) to completely remove old drivers before installing new ones.
  • Overheating:
    • Check fan operation on the graphics card.
    • Ensure proper case airflow and clean any dust buildup.
    • Monitor temperatures using software utilities.
  • Performance Issues:
    • Ensure your system meets the recommended specifications for the applications or games you are running.
    • Check for background applications consuming system resources.
    • Verify that your power supply is sufficient.

9. Specifications

Detailed technical specifications for the QTHREE Radeon RX 590 GME Graphics Card:

Table of RX 590 GME 8G parameters including GPU clock, memory, shaders, and interfaces

Image 9.1: Key parameters of the RX 590 GME 8G graphics card.

FeatureSpecification
Graphics CoprocessorAMD Radeon RX 590 GME
GPU Clock Speed1206 MHz
Graphics RAM Size8 GB GDDR5
Memory Clock Speed6000 MHz
Memory Bus Width256-bit
Stream Processors2048 SP
Video Output Interface1x DisplayPort, 1x HDMI, 1x DVI
PCI Express InterfacePCI Express 3.0 x16
Power Connector1x 6-pin/8-pin
Maximum Power Draw (TDP)175W
DirectX SupportDirectX 12
Dimensions (Approx.)21cm (8.26") L x 14cm (5.51") W x 4cm (1.57") H
Item Weight1.39 pounds
Screenshot of GPU-Z software displaying detailed specifications for the AMD Radeon RX 590 GME

Image 9.2: Detailed GPU-Z information for the Radeon RX 590 GME.

10. Warranty and Support

For any questions regarding the QTHREE Radeon RX 590 GME Graphics Card, please contact seller support through your purchase platform. Keep your proof of purchase for warranty claims.

Related Documents - RX 590 GME 8G

Preview Gigabyte Graphics Cards Quick Guide: Hardware and Software Installation
This Gigabyte Graphics Cards Quick Guide provides essential steps for hardware installation, including connecting the card to the motherboard and display, and software installation for drivers and utilities. It also details supported ports, restricted substances compliance, and important product notices.
Preview Sapphire Radeon NITRO+ RX 480 Graphics Card Mail-in Rebate Offer
Details and instructions for claiming a mail-in rebate of up to $15.00 on select Sapphire Radeon NITRO+ RX 480 graphics cards purchased between November 3, 2016, and December 15, 2016, exclusively from Newegg.com.
Preview PowerColor Graphics Card Quick Installation Guide
A comprehensive guide for installing and setting up PowerColor graphics cards, including system requirements, hardware installation steps, driver installation, and additional support information.
Preview Supported PC Hardware for Batocera
A comprehensive guide to PC hardware compatibility for Batocera, focusing on graphics card support. It covers Nvidia (GTX, RX) and AMD Radeon GPUs, including driver installation, configuration overrides via `batocera-boot.conf`, hybrid/Optimus laptop setups, legacy driver options, and troubleshooting Radeon HDMI audio output. It also touches upon Intel integrated graphics like i965.
Preview AMD Radeon RX 6000 Series Graphics Cards Quick Setup Guide
A quick setup guide for installing AMD Radeon RX 6000 Series graphics cards, including the RX 6800 XT and RX 6800. Covers system requirements, hardware installation, and software setup.
Preview PowerColor Red Devil Graphics Card Quick Installation Guide
This guide provides quick installation instructions for the PowerColor Red Devil graphics card, covering system requirements, hardware setup, driver installation, and ARGB LED connection.