Manuals+

Fuers A6908Kit

Fuers 5MP Security Camera System User Manual

Model: A6908Kit | Brand: Fuers

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Fuers 5MP Security Camera System. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

1.1 Package Contents

  • 1x 5MP 8CH DVR (Pre-installed 500G Hard Drive)
  • 2 x 5MP Dome Security Cameras
  • 2 x 15 meters integrated BNC Cables
  • 1 X DVR Power Supply
  • 1 X USB Mouse
  • 1 X User Manual
  • 2 X Camera Power Supply
  • 2 X Screw Bags for Camera
Package Contents of Fuers 5MP Security Camera System
Figure 1.1: All components included in the Fuers 5MP Security Camera System package.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

  • Use only the power adapters provided with the system.
  • Ensure proper ventilation for the DVR to prevent overheating.
  • Avoid placing the DVR or cameras in extreme temperatures, direct sunlight, or near water.
  • Do not attempt to disassemble or modify the product.
  • Keep cables organized to prevent tripping hazards and damage.

3. Product Overview

The Fuers 5MP Security Camera System provides comprehensive surveillance with advanced features.

3.1 Key Features

  • 5MP Super HD Resolution: Captures clear videos with 2 times the resolution of 1080p HD.
  • AI Human Detection: Smart motion technology detects human presence and sends alerts.
  • H.265+ Advanced Compression: Saves storage space while maintaining clear video quality.
  • Stunning Night Vision: 24pcs infrared LEDs provide up to 49ft night vision.
  • Remote Access: View live feeds and playback via free mobile app (iCSee) or PC software (VMS).
  • 24/7 Recording: Continuous recording with pre-installed 500GB HDD, expandable up to 14TB.
  • Plug & Play Setup: Easy installation with Auto-Pair technology.
  • Multi-format DVR: 8CH DVR supports TVI, CVBS, AHD, CVI, XVI Analog, and IP cameras.
  • IP66 Waterproof Dome Cameras: Suitable for both indoor and outdoor monitoring.
Fuers 5MP Security Camera System with DVR and two dome cameras
Figure 3.1: Overview of the Fuers 5MP Security Camera System.

3.2 DVR and Camera Components

Detailed diagram of DVR ports and dome camera features
Figure 3.2: Detailed view of DVR input/output ports and dome camera specifications.
Diagram showing the rear panel of the DVR with labeled ports
Figure 3.3: Rear panel of the DVR with labeled ports for video input, HDMI, VGA, audio, USB, LAN, and power.
Diagram showing the 360-degree rotation and 90-degree tilt capabilities of the dome camera
Figure 3.4: Dome camera with 360° rotation and 90° tilt capability for flexible positioning.

4. Setup

4.1 Physical Connections

  1. Connect the DVR to a monitor using an HDMI or VGA cable.
  2. Plug the USB mouse into one of the DVR's USB ports.
  3. Connect the DVR power supply to the DVR and a power outlet.
  4. Connect the 5MP dome cameras to the DVR's video input ports using the provided BNC cables.
  5. Connect the camera power supplies to the cameras and power outlets.
  6. For remote access, connect the DVR to your router using an Ethernet cable.
Diagram illustrating the plug and play setup of the security camera system
Figure 4.1: Plug & Play setup diagram showing connections between cameras, DVR, router, and power.
Diagram showing the simple plug and play connection for the DVR and camera
Figure 4.2: Simplified diagram of DVR and camera connections for easy setup.

4.2 Hard Drive Installation (if not pre-installed)

Your DVR comes with a 500GB HDD pre-installed. If you need to install or replace a hard drive, follow these steps:

  1. Unplug the DVR from power and remove the top cover.
  2. Connect the SATA power and data cables from the DVR to the corresponding ports on your hard drive.
  3. Secure the hard drive inside the DVR casing using screws.
  4. Replace the top cover and plug in the DVR.

Video 4.1: Hard disk installation method for the DVR.

4.3 Initial Configuration

  1. Power on the DVR. The system will boot up and display on the connected monitor.
  2. Follow the on-screen wizard to set the language, time zone, and create a strong password for the administrator account.
  3. Ensure the display resolution is set to 1920x1080P for optimal viewing quality.
  4. Configure network settings (DHCP is usually enabled by default for automatic IP assignment).

Video 4.2: Setup and connection guide for the 8CH DVR with 5MP dome cameras.

5. Operating

5.1 Live View

After initial setup, the live view of all connected cameras will be displayed on your monitor. You can switch between single-camera view or multi-camera grid layouts.

Screenshot of mobile app showing live view from multiple cameras with global map overlay
Figure 5.1: Remote live view of cameras via mobile application.

5.2 Recording

The system supports 24/7 continuous recording. With H.265+ compression, video quality is maintained while optimizing storage space.

Image showing DVR with 500GB HDD and option for up to 14TB, indicating 24/7 recording capability
Figure 5.2: The DVR supports 24/7 recording with a built-in 500GB HDD, expandable up to 14TB.
Comparison image showing H.264 vs H.265+ video compression quality and efficiency
Figure 5.3: H.265+ compression provides smoother and clearer video quality compared to H.264, while saving storage space.

5.3 Playback

Access recorded footage through the DVR interface or the mobile app. The system supports smart playback features like face search.

Video 5.1: Guide on how to configure DVR video playback settings.

5.4 Remote Access

Download the free