1. Introduction
Thank you for choosing the MYSTILUCK Stylus Pen. This user manual provides detailed instructions on how to set up, operate, and maintain your stylus to ensure optimal performance. This stylus is designed to enhance your iPad experience with features like palm rejection, tilt sensitivity, fast charging, and magnetic attachment.
2. Package Contents
Please check the package to ensure all items are present:
- 1 x MYSTILUCK Stylus Pen
- 4 x Replacement Pen Tips
- 1 x USB-C Charging Cable
- 1 x User Manual

Image 2.1: Items included in the MYSTILUCK Stylus Pen package.
3. Compatibility
The MYSTILUCK Stylus Pen is compatible with specific iPad models released from 2018 to 2025. Please verify your iPad model before use.
3.1. Supported iPad Models:
- iPad (6th, 7th, 8th, 9th, 10th Generation)
- iPad Air (3rd, 4th, 5th Generation, M2)
- iPad Pro 11-inch (1st, 2nd, 3rd, 4th Generation, M4)
- iPad Pro 12.9-inch (3rd, 4th, 5th, 6th Generation, M4)
- iPad Mini (5th, 6th, 7th Generation)
3.2. Non-Compatible Devices:
This stylus is NOT compatible with:
- iPad models released before 2018
- iPhone, Android smartphones and tablets
- Microsoft Surface devices, Chromebooks, Kobo, etc.

Image 3.1: Detailed compatibility chart for the MYSTILUCK Stylus Pen.
Important: How to Check Your iPad Model
To ensure compatibility, please check the model number on the back of your iPad. It usually starts with the letter 'A' followed by four digits (e.g., A2325).

Image 3.2: Location of the model number on the back of your iPad.
4. Setup and First Use
4.1. Charging the Stylus
Before first use, or when the battery is low, charge your stylus using the provided USB-C cable.
- Connect the USB-C end of the cable to the charging port on the stylus.
- Connect the other end of the cable to a USB power adapter (not included) or a USB port on a computer.
- The LED indicator lights will show the charging status. A full charge takes approximately 13 minutes.

Image 4.1: Charging the stylus via USB-C.
Battery Indicator:
- 3 Green Lights: 70-100% battery (approx. 10 hours of work)
- 2 Green Lights: 30-69% battery (approx. 6 hours of work)
- 1 Green Light: Less than 30% battery (approx. 0.5 hours of work)

Image 4.2: Stylus battery level indicators.
4.2. Powering On/Off
The stylus does not require Bluetooth pairing. Simply tap the top of the stylus to turn it on or off.
- To Turn On: Tap the top of the stylus. Three green lights will illuminate.
- To Turn Off: Tap the top of the stylus again. The lights will turn off.

Image 4.3: Powering the stylus on and off without Bluetooth.
4.3. Disconnecting Previous Pencils (If Applicable)
If you have previously connected an Apple Pencil or another stylus to your iPad, it is recommended to disconnect it before using the MYSTILUCK Stylus Pen to avoid conflicts.
- Go to your iPad's Settings.
- Tap on Bluetooth.
- Under