Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your upHere UP2K6 6 Heat Pipes Black CPU Air Cooler. Designed for exceptional cooling performance and quiet operation, this cooler is compatible with a wide range of Intel and AMD CPU sockets. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.
Video: upHere UP2 Dual Tower 6 Heat Pipes CPU Air Cooler Overview. This video provides a general overview of the cooler's features and design.
Package Contents
Verify that all components are present before beginning installation:
- upHere UP2K6 CPU Air Cooler (with dual 120mm fans)
- Intel Mounting Bracket Kit (for LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066)
- AMD Mounting Bracket Kit (for AM5/AM4/AM3/AM2/FM2/FM1 series)
- Thermal Paste
- Screwdriver
- User Manual (this document)
Image: All components included in the upHere UP2K6 CPU Air Cooler package, showing the cooler, various mounting brackets, thermal paste, and a screwdriver.
Specifications
| Feature | Detail |
|---|---|
| Heat Pipes | 6 x 6mm Pure Copper Direct Contact |
| Fan Size | Dual 120mm PWM Fans |
| Fan Speed | 600-1650 RPM ±10% |
| Air Flow | 68.2 CFM |
| Noise Level | ≤26 dB(A) |
| Cooling Method | Air Cooling |
| Power Connector | 4-Pin |
| Voltage | 12V DC |
| Material | Aluminum Fins, Copper Heat Pipes |
| Product Dimensions | 158 x 130 x 122 mm (6.22 x 5.11 x 4.8 inches) |
| Item Weight | 2.68 pounds |
Image: Detailed diagram showing the dimensions and key technical specifications of the cooler.
Compatibility
The upHere UP2K6 CPU Air Cooler is designed for broad compatibility with various CPU sockets:
- Intel Sockets: LGA 1851, 1700, 1150, 1155, 1156, 1200, 1121, 1366, 1356, 2011, 2066 (X79/X99)
- AMD Sockets: AM5, AM4, AM3, AM2, FM2, FM1 series
Its asymmetrical design ensures 100% RAM clearance, preventing interference with tall memory modules.
Image: The asymmetrical design of the cooler, highlighting its RAM clearance feature.
Installation Guide
Follow these steps carefully to install your upHere UP2K6 CPU Air Cooler. Refer to the video for visual guidance.
Video: Detailed installation guide for the upHere UP2 Series CPU Air Cooler, demonstrating steps for both Intel and AMD platforms.
Step 1: Prepare the Motherboard
- Identify your CPU socket type (Intel or AMD).
- For Intel sockets, attach the appropriate backplate to the rear of the motherboard.
- For AMD sockets, ensure the stock AMD retention clips are removed, and install the provided AMD mounting brackets.
Image: Various mounting brackets and screws for Intel and AMD CPU sockets.
Step 2: Apply Thermal Paste
- Clean the surface of your CPU and the cooler's base with isopropyl alcohol.
- Apply a small, pea-sized amount of thermal paste to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will spread it evenly.
Step 3: Mount the Cooler
- Remove the protective film from the cooler's copper base.
- Carefully align the cooler with the mounting brackets on the motherboard.
- Using the provided screwdriver, secure the cooler by tightening the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
- The non-disassembly fan installation allows for easy setup without removing the fans or RAM.
Image: Demonstrates the easy installation method, showing a screwdriver securing the cooler from above.
Image: A close-up view of the six 6mm pure copper heat pipes designed for direct contact with the CPU.
Step 4: Connect Power
- Connect the cooler's 4-pin fan connector to the CPU_FAN header on your motherboard.
Image: The CPU cooler mounted inside a computer case, with an inset showing the 4-pin power connector.
Operation
The upHere UP2K6 CPU Air Cooler features dual 120mm PWM fans that automatically adjust their speed based on CPU temperature, providing efficient cooling while minimizing noise. The fan speed ranges from 600 to 1650 RPM, delivering an airflow of 68.2 CFM with a noise level of ≤26 dB(A).
Image: Illustration of the dual tower heatsink and dual PWM fan design, highlighting performance metrics.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your CPU cooler.
- Dust Removal: Periodically clean the heatsink fins and fan blades using compressed air or a soft brush to remove accumulated dust. Ensure the fans are not spinning during cleaning.
- Thermal Paste: It is recommended to reapply thermal paste every 1-2 years, or if the cooler is removed and reinstalled.
Troubleshooting
If you encounter issues with your CPU cooler, refer to the following common solutions:
- High CPU Temperatures:
- Ensure the cooler is securely mounted and making proper contact with the CPU.
- Verify that thermal paste was applied correctly and is not dried out.
- Check if the fans are spinning freely and are connected to the CPU_FAN header.
- Clean any dust buildup from the heatsink and fans.
- Ensure adequate airflow within your PC case.
- Fan Not Spinning:
- Check the 4-pin fan connector to ensure it is securely plugged into the motherboard's CPU_FAN header.
- Inspect for any obstructions preventing the fan blades from rotating.
- Excessive Noise:
- Ensure all mounting screws are tightened evenly to prevent vibrations.
- Check for any cables or components touching the fan blades.
- Clean dust from the fans, as buildup can cause imbalance and noise.
Warranty and Support
For warranty information and technical support, please refer to the official upHere website or contact their customer service. Keep your purchase receipt for warranty claims.
