Blossom 36 Inch Bathroom Vanity with Sink and LED Lights - Model V8037 Instruction Manual

Introduction

Thank you for choosing the Blossom 36 Inch Wall Mounted Floating Bathroom Vanity with Acrylic Sink and LED Lights. This manual provides essential information for the safe installation, operation, and maintenance of your new vanity. Please read all instructions carefully before beginning installation or use, and retain this manual for future reference.

Safety Information

• Always ensure the power supply is disconnected before any electrical work or maintenance.
• Installation should be performed by a qualified professional to ensure proper mounting and plumbing connections.
• Do not overload drawers or shelves.
• Keep children away from the installation area.
• Use appropriate safety gear during installation.

Package Contents

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact Blossom customer support.

• Pre-assembled Vanity Cabinet (Model V8037)
• Integrated Acrylic Sink
• Soft-Close Drawer Slides (pre-installed)
• Integrated LED Lighting System
• Mounting Hardware (for wall installation)

Specifications

Image: Overall dimensions of the Blossom 36 Inch Bathroom Vanity. The vanity measures 35.88 inches in width, 18.13 inches in depth, and 23.38 inches in height. A medicine cabinet is shown above but is not included.

Image: Detailed technical diagrams providing various measurements and internal structure of the vanity, including LED light placement. Dimensions are provided in both millimeters and inches.

Setup and Installation

The Blossom 36 Inch Bathroom Vanity is designed for wall-mounted installation. While the unit is pre-assembled, professional installation is highly recommended to ensure proper mounting, plumbing, and electrical connections for the LED lighting.

Installation Steps (General Guidelines):

1. Prepare the Wall: Ensure the wall is structurally sound and capable of supporting the vanity's weight. Locate wall studs for secure mounting.
2. Mark Mounting Points: Use the provided mounting hardware and templates (if applicable) to mark the precise locations for drilling on the wall.
3. Drill Holes: Drill pilot holes according to the marked points.
4. Mount the Vanity: Carefully lift and secure the vanity to the wall using the appropriate mounting hardware. Ensure it is level and firmly attached.
5. Connect Plumbing: Connect the water supply lines and drain to the sink. Ensure all connections are watertight.
6. Connect Electrical (LED Lights): Connect the LED lighting system to the appropriate electrical supply. This step requires a qualified electrician.
7. Test Functionality: Turn on the water supply and check for leaks. Test the LED lights for proper operation.

Image: An inside view of the vanity cabinet, showing the internal structure and space available for plumbing connections. The U-shaped drawer design is visible, accommodating the sink basin.

Operating Instructions

LED Lighting

Your vanity features integrated LED lighting located above the front fender and inside the open shelf. The lighting is adjustable, allowing you to select color temperatures from 3000K (warm white) to 6000K (cool white) to suit your preference. Refer to the specific control mechanism (e.g., touch sensor, wall switch) for adjusting the light settings.

Image: Front view of the Blossom 36 Inch Bathroom Vanity with the integrated LED lighting illuminated, showcasing the ambient light provided above the fender and within the open shelf.

Soft-Close Drawer

The vanity is equipped with a U-shaped soft-close drawer. This feature ensures the drawer closes gently and silently, preventing slamming and reducing wear over time. To operate, simply push the drawer inward; the soft-close mechanism will engage automatically as it approaches the closed position.

Image: The vanity with its U-shaped drawer open, revealing storage space for toiletries and other bathroom essentials. The design accommodates the sink's plumbing.

Care and Maintenance

Proper care will extend the life and maintain the appearance of your Blossom vanity.

• Cleaning the Vanity: Wipe the wood surfaces with a damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
• Cleaning the Sink: The acrylic sink is designed to resist scratches, stains, and fading. Clean with mild soap and water. Do not use abrasive pads or strong chemical cleaners.
• Moisture Protection: Although the vanity is moisture-resistant, promptly wipe away any standing water to prevent long-term damage.
• Drawer Slides: Periodically check the soft-close drawer slides for smooth operation. If needed, clean any dust or debris from the tracks.

Troubleshooting

This section addresses common issues you might encounter.

• LED Lights Not Working:
  • Check the electrical connection to the vanity.
  • Ensure the power switch is in the 'ON' position.
  • If the issue persists, consult a qualified electrician.
• Drawer Not Closing Softly:
  • Inspect the drawer slides for any obstructions or debris.
  • Ensure the drawer is properly aligned on its tracks.
  • If the slides are damaged, contact customer support for replacement parts.
• Water Leaks from Sink/Plumbing:
  • Immediately turn off the water supply.
  • Check all plumbing connections under the sink for tightness.
  • Inspect the drain assembly for proper sealing.
  • If unable to resolve, contact a qualified plumber.

Warranty Information

The Blossom 36 Inch Bathroom Vanity is backed by a one-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or warranty inquiries, please contact Blossom customer service. Refer to the contact information provided with your purchase or visit the official Blossom website for support details.