1. Introduction
The Wohome 2.1 Sound Bar with Wired Subwoofer is designed to enhance your audio experience for smart TVs, offering powerful sound, deep bass, and dynamic lighting. This versatile system can be configured in a single-strip or split mode to suit your space and preferences.
It features multiple connectivity options including Bluetooth 5.3, Optical, AUX, and USB, along with built-in DSP for optimized sound modes. The integrated RGB-IC backlight adds an atmospheric visual element to your entertainment setup.
2. What's in the Box
Please verify that all components listed below are included in your package:
- 1 x 32-inch Sound Bar (Detachable) & Subwoofer
- 1 x Remote Control & Power Adapter
- 1 x Optical Cable
- 1 x 3.5mm Audio Cable
- 2 x Connection Cables (0.18M & 2.5M)
- 2 x Stands
- 1 x User Manual
Figure 2.1: All included components of the Wohome Sound Bar system.
3. Setup
3.1 Unpacking and Placement
- Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Place the subwoofer in a desired location, ideally near your TV for optimal bass response.
- Choose your preferred soundbar configuration:
- Single-Strip Mode: Connect the two soundbar sections together to form a single 32-inch unit. Place it directly below your TV.
- Split Mode: Attach the provided stands to each soundbar section. Place the two sections vertically on either side of your TV for a wider soundstage.
Figure 3.1: The soundbar offers two installation options: single-strip or split mode.
3.2 Connecting the Subwoofer and Soundbar
- Connect the wired subwoofer to the main soundbar unit using the provided connection cable. Ensure a secure connection.
- Plug the power adapter into the soundbar's DC IN port, then plug the adapter into a wall outlet.
4. Operating Instructions
4.1 Powering On/Off
Press the Power button on the remote control or the soundbar to turn the unit on or off.
4.2 Input Selection
Press the Input button on the remote or soundbar to cycle through available input modes: Bluetooth (BT), Optical (OPT), AUX, and USB.
Figure 4.1: Available input ports on the soundbar.
4.3 Bluetooth Connection (Bluetooth 5.3)
- Select Bluetooth mode on the soundbar. The display will show "BT".
- On your mobile device (smartphone, tablet), enable Bluetooth and search for "Wohome S111 Pro".
- Select the soundbar from the list to pair. Once connected, the soundbar will indicate successful pairing.
4.4 Optical Connection
Connect your TV's Optical OUT port to the soundbar's OPTICAL IN port using the provided optical cable. Ensure your TV's audio output is set to PCM (or SPDIF and optical) and external speaker mode. (Note: HDMI is not supported.)
4.5 AUX Connection
Connect your device's 3.5mm audio output to the soundbar's AUX IN port using the provided 3.5mm audio cable. For some TVs, you may need to go to the audio (sound) settings, select analog output, then select "Variable" and save the setting.
4.6 USB Playback
Insert a USB flash drive into the USB port on the soundbar. The soundbar will automatically switch to USB mode and begin playing compatible audio files. This port also supports software updates.
4.7 Sound Modes (DSP)
The soundbar features a built-in DSP with three preset sound modes. Press the MODE button on the remote to switch between:
- Music Mode: Provides balanced sound for general listening.
- Movie Mode: Enhances bass for a cinematic experience.
- News Mode: Delivers crystal-clear vocals for dialogue-heavy content.
Figure 4.2: DSP with 3 Preset Sound Modes.
4.8 Bass Adjustment
Use the Bass +/- buttons on the remote control to adjust the subwoofer's output. There are 7 adjustable bass levels to customize your audio experience.
Figure 4.3: The 5-inch wired subwoofer delivers deep and powerful bass.
4.9 RGB-IC Atmosphere Lighting
The soundbar features RGB-IC backlighting. Use the remote control to:
- Switch between dynamic lighting (syncs with music via chip-level voice recognition) and static pure color lighting.
- Turn the ambient light on or off. Static pure white lighting is ideal as a background light to reduce eye strain from TV glare in dark environments.
Figure 4.4: RGB-IC lighting modes for dynamic visuals or eye comfort.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surfaces of the soundbar and subwoofer. Do not use liquid cleaners or aerosols, as they may damage the finish or internal components.
- Ventilation: Ensure proper ventilation around the soundbar and subwoofer. Do not block any ventilation openings.
- Environment: Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight. Keep it away from sources of heat and moisture.
- Cables: Periodically check all cables for any signs of wear or damage. Replace damaged cables immediately to prevent electrical hazards.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power outlet not active. | Ensure power adapter is securely connected to the soundbar and a working power outlet. |
| No sound | Incorrect input mode; Volume too low; Cables not connected properly; TV audio settings incorrect. | Select the correct input mode (Bluetooth, Optical, AUX, USB). Increase volume. Check all audio cables are securely connected. For Optical/AUX, ensure TV audio output is set to PCM/Variable and external speakers are enabled. |
| Bluetooth connection issues | Device too far; Interference; Not in pairing mode. | Ensure device is within range (approx. 10 meters). Avoid obstacles. Re-enter Bluetooth pairing mode on soundbar and device. |
| Remote control not working | Batteries low/dead; Obstruction between remote and soundbar; Not compatible with TV remote. | Replace remote batteries. Remove any obstructions. Note that the soundbar is not compatible with TV remotes (Fire, Roku, Universal). |
| Distorted sound | Volume too high; Poor audio source; Incorrect sound mode. | Lower the volume. Try a different audio source. Adjust sound mode (Music, Movie, News) or bass levels. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | S111 Pro |
| Speaker Type | Soundbar with Wired Subwoofer |
| Surround Sound Channel Configuration | 2.1 |
| Speaker Maximum Output Power | 140 Watts (Peak) |
| Subwoofer Diameter | 5 Inches |
| Bass Levels | 7 adjustable levels |
| Connectivity Technology | Bluetooth 5.3, Optical, AUX, USB (HDMI not supported) |
| Special Feature | RGB-IC Atmosphere Lighting, Detachable Design, Built-in DSP with 3 Sound Modes |
| Control Method | Remote Control, On-unit Buttons |
| Product Dimensions | 32"D x 3.6"W x 2.9"H (single-strip) |
| Item Weight | 12.54 pounds |
8. Warranty and Support
Wohome provides a 2-year warranty for this product, ensuring peace of mind regarding manufacturing defects and performance issues.
Additionally, a 30-day money-back guarantee is offered from the date of purchase.
For any technical assistance, troubleshooting, or warranty claims, Wohome offers lifetime tech support. Please refer to the contact information provided in your product packaging or visit the official Wohome website for support details.
For further assistance, you may visit the Wohome Store on Amazon.
