OttLite LED Lamp Clip On Magnifying Glass with Light User Manual

Introduction

Welcome to your OttLite LED Lamp Clip On Magnifying Glass with Light manual. This versatile lamp combines a magnifier and light, designed for detailed tasks, crafting, needlework, and general reading. Featuring OttLite's ClearSun LED Technology, it provides balanced, smooth lighting that reduces eyestrain and ensures accurate color representation.

Image: The OttLite LED Lamp Clip On Magnifying Glass with Light, demonstrating its use with small beads for crafting.

Important Safety Instructions

• Read all instructions before operating the device.
• Do not operate the lamp near water or in excessively humid environments.
• Keep the lamp away from direct heat sources.
• Use only the power adapter provided with the unit.
• Avoid looking directly into the LED light source for prolonged periods to prevent eye discomfort.
• Ensure the magnifying lens is clean and free of debris for optimal viewing clarity.

Package Contents

• OttLite LED Lamp Clip On Magnifying Glass with Light
• Power Adapter

Setup

1. Attach the Lamp: Securely clip the lamp to a stable surface such as a desk, table, or bookshelf. Ensure the clip is firmly attached to prevent accidental dislodgement. The clip is designed for surfaces up to approximately 1.5 inches thick.
2. Connect Power: Plug the power adapter into the lamp's power input, then plug the adapter into a standard electrical outlet.
3. Position the Lamp: Utilize the 14.5-inch super flexible neck to adjust the lamp head and magnifying glass to your desired position. The flexible neck allows for precise light and magnification placement.

Image: A user positioning the OttLite lamp for detailed crafting work, highlighting the flexible neck and clip mechanism.

Operating Instructions

Power and Brightness Control

The lamp features touch-activated controls located on the clip.

• Power On/Off: Tap the touch control button once to turn the lamp on or off.
• Adjust Brightness: With the lamp on, tap the touch control button repeatedly to cycle through three brightness settings: low, medium, and high.

Using the Magnifying Glass

• The lamp is equipped with a 3-3/8 inch optical-grade magnifier providing 1.75x magnification, along with a 4x spot viewer for enhanced detail.
• To use the magnifier, position the lamp head directly over the object you wish to view.
• The magnifier includes a flip-up cover to protect the lens when not in use. Ensure the cover is open when using the magnification feature.

Image: A detailed view of the lamp's magnifying lens, showing the 1.75x magnification and the integrated 4x spot viewer.

Maintenance

• Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp and magnifying lens. For the lens, a specialized lens cleaning cloth is recommended to avoid scratches. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the lamp in a clean, dry place. Close the magnifying lens cover to protect it from dust and damage.

Troubleshooting

Lamp does not turn on:

• Ensure the power adapter is securely plugged into both the lamp and a working electrical outlet.
• Verify the electrical outlet is receiving power.

Light flickers or is dim:

• Check all power connections for a secure fit.
• Cycle through brightness settings to ensure the lamp is not on the lowest setting.

Magnification is blurry:

• Clean the magnifying lens with a soft, lint-free cloth.
• Adjust the flexible neck to bring the lens closer or further from the object until clear focus is achieved.

Specifications

Warranty and Support

For warranty information or technical support regarding your OttLite LED Lamp Clip On Magnifying Glass with Light, please visit the official OttLite website or contact their customer service department. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.

You can find more information and contact details on the OttLite Store on Amazon.