ASUS NUC 13 Pro Slim Kit RNUC13L3KV500000I User Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your ASUS NUC 13 Pro Slim Kit RNUC13L3KV500000I. This mini PC is designed for various computing tasks, offering a compact form factor with robust performance. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

Figure 1: The ASUS NUC 13 Pro Slim Kit RNUC13L3KV500000I mini PC. This image shows the compact design of the barebone unit.

2. Safety Information

• Power Source: Use only the power adapter provided with your device or an approved replacement. Ensure the power outlet is properly grounded.
• Ventilation: Do not block ventilation openings. Ensure adequate airflow around the device to prevent overheating.
• Environment: Operate the device in a dry environment, away from direct sunlight, heat sources, and liquids. Avoid extreme temperatures.
• Servicing: Do not attempt to service the device yourself. Refer all servicing to qualified service personnel.
• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.

3. Package Contents

Verify that all items are present in your package. If any item is damaged or missing, contact your retailer.

• ASUS NUC 13 Pro Slim Kit RNUC13L3KV500000I (Barebone Unit)
• Power Adapter and Power Cord
• VESA Mounting Bracket (if included)
• Quick Start Guide
• Screws for M.2 SSD and VESA mount

Note: As a barebone kit, RAM (DDR4 SO-DIMM) and storage (M.2 SSD) are not included and must be purchased separately.

4. Setup

4.1 Installing Memory (RAM)

1. Unscrew the bottom cover of the NUC unit and carefully remove it.
2. Locate the two SO-DIMM slots on the motherboard.
3. Align the notch on the DDR4 SO-DIMM module with the notch in the slot.
4. Insert the module at a 45-degree angle and push down until the retaining clips snap into place.
5. Repeat for the second module if installing dual channel memory.

4.2 Installing Storage (M.2 SSD)

1. Locate the M.2 slot on the motherboard.
2. Insert the M.2 SSD into the slot at a slight angle.
3. Gently push down the SSD and secure it with the provided screw.

4.3 Connecting Peripherals

• Display: Connect your monitor to the HDMI or Thunderbolt 4 (USB-C) port using an appropriate cable.
• Keyboard/Mouse: Connect your USB keyboard and mouse to the available USB 3.2 Gen 2 ports.
• Network: For a wired connection, connect an Ethernet cable to the Gigabit Ethernet port.
• Power: Connect the power adapter to the DC-in port on the NUC and then plug it into a power outlet.

4.4 Operating System Installation

Since this is a barebone unit, an operating system (e.g., Windows 11, Linux) must be installed. Prepare a bootable USB drive with your preferred OS installer and follow the on-screen instructions during boot-up to install the operating system on your M.2 SSD.

5. Operating Instructions

5.1 Powering On/Off

• Power On: Press the power button located on the front of the unit.
• Power Off: From your operating system, select "Shut Down" or "Power Off". Alternatively, press and hold the power button for 4 seconds to force a shutdown (use only when necessary).

5.2 Wireless Connectivity

• Wi-Fi 6E: Once the operating system is installed, navigate to network settings to connect to your wireless network.
• Bluetooth 5.3: Enable Bluetooth in your operating system settings to pair with compatible devices such as keyboards, mice, or audio devices.

6. Maintenance

6.1 Cleaning

• Ensure the device is powered off and unplugged before cleaning.
• Use a soft, lint-free cloth to wipe the exterior. For stubborn marks, slightly dampen the cloth with water.
• Use compressed air to clear dust from ventilation openings periodically.

6.2 Software Updates

Regularly update your operating system, drivers, and BIOS to ensure optimal performance, security, and compatibility. Visit the ASUS support website for the latest drivers and BIOS updates for your model.

7. Troubleshooting

7.1 No Power

• Check if the power adapter is securely connected to both the NUC and the power outlet.
• Verify the power outlet is functional by plugging in another device.
• Ensure the power button is pressed firmly.

7.2 No Display Output

• Confirm the monitor is powered on and set to the correct input source.
• Check the display cable connections at both ends. Try a different cable or port if available.
• Ensure RAM modules are correctly seated. Reseat them if necessary.

7.3 Operating System Not Booting

• Verify the M.2 SSD is properly installed and detected in the BIOS/UEFI settings.
• Check the boot order in BIOS/UEFI to ensure the SSD is prioritized.
• If recently installed, ensure the OS installation was completed successfully.

8. Specifications

9. Warranty and Support

The ASUS NUC 13 Pro Slim Kit RNUC13L3KV500000I comes with a 3-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official ASUS support website.

For technical support, driver downloads, and further assistance, please visit the ASUS support website:

www.asus.com/support/

When contacting support, please have your product model number (RNUC13L3KV500000I) and serial number ready.