X2 Ultra Retro Game Stick Instruction Manual

Introduction

The OYDL X2 Ultra Retro Game Stick is a plug-and-play video game console designed to bring classic arcade and console gaming experiences to your TV. Featuring HDMI connectivity and two 2.4G wireless controllers, it comes pre-loaded with over 58,000 games across more than 40 emulators, offering extensive entertainment for all ages.

Package Contents

Please verify that all items listed below are included in your package:

• Game Console (Game Stick) x 1
• Wireless Gamepad x 2
• HDMI Cord x 1
• USB Charging Cable x 1
• USB Receiver x 1 (for wireless controllers)
• Instruction Manual x 1

Image: All components included in the X2 Ultra Retro Game Stick package.

Setup Guide

1. Connect the Game Stick: Insert the X2 Ultra Game Stick directly into an available HDMI port on your television or monitor.
   

   Image: The game stick plugged into a TV's HDMI port.

2. Power the Game Stick: Connect the USB charging cable to the Game Stick's power input port and then to a USB power source (e.g., a USB port on your TV, a USB wall adapter, or a power strip with USB ports). The Game Stick requires constant power to operate.
3. Insert USB Receiver: Plug the 2.4G USB receiver into the USB port on the Game Stick. This receiver enables wireless communication with the controllers.
4. Prepare Wireless Controllers: Insert batteries (not included) into each wireless gamepad. Ensure the controllers are powered on. They should automatically pair with the USB receiver.
5. Select HDMI Input: Switch your TV's input source to the corresponding HDMI port where the Game Stick is connected. The system interface should appear on your screen.

Operating Instructions

Navigating the System

Once the system boots up, you will see the main menu. Use the directional pad (D-pad) on your wireless controller to navigate through options and select games. The 'A' button typically confirms selections, and the 'B' button usually acts as a back or cancel function.

Playing Games

• From the main menu, select the emulator or game category you wish to browse.
• Scroll through the list of available games.
• Select a game to launch it.
• In-Game Menu: During gameplay, pressing the START and SELECT buttons simultaneously on your controller will typically bring up the in-game menu. This menu allows you to save game progress, load saved states, exit the game, and access other options.

Image: A user holding the wireless controller, demonstrating its ergonomic design for immersive gameplay.

Saving and Loading Game Progress

The in-game menu (accessed by pressing START + SELECT) provides options to save your current game state (save state) and load previously saved states. This feature allows you to pick up exactly where you left off, even in games that do not have an in-game save function.

Using Cheat Codes

Many games support cheat codes, including GameGenie codes. To use them:

1. During gameplay, press START + SELECT to open the in-game menu.
2. Scroll down and select "Cheats".
3. Choose "Add Cheat" to create a new cheat field.
4. Select the new field to enter the cheat code and an optional description.
5. Apply changes and resume your game. Cheats can be enabled, disabled, or deleted at any time from this menu.

Maintenance and Care

• Cleaning: Use a soft, dry cloth to clean the Game Stick and controllers. Do not use liquid cleaners or abrasive materials.
• Storage: Store the device and accessories in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care (Controllers): Remove batteries from the wireless gamepads if they will not be used for an extended period to prevent leakage.
• Handling: Avoid dropping the Game Stick or controllers, and do not expose them to water or excessive moisture.

Troubleshooting

Controllers not connecting or experiencing lag:

Ensure the 2.4G USB receiver is securely plugged into the Game Stick. Check that fresh batteries are installed in the controllers and they are powered on.

Some Wi-Fi routers may interfere with the 2.4G signal. If your router supports both 2.4G and 5G bands, ensure it is configured to allow 2.4G connections (e.g., set Wi-Fi mode to "mixed" or enable both bands). This can prevent interference and improve controller connectivity.

Game Stick not powering on or no signal on TV:

Verify that the USB charging cable is properly connected to the Game Stick and a reliable power source. The Game Stick requires continuous power to operate.

Ensure your TV is set to the correct HDMI input channel where the Game Stick is connected.

Games freezing or crashing:

Ensure the Game Stick has adequate ventilation and is not overheating. Try restarting the Game Stick by unplugging and replugging the power cable.

For persistent issues, ensure the micro SD card is properly inserted and not corrupted. Avoid removing the SD card while the device is powered on.

In-game button mapping seems incorrect:

While the system provides general button mapping, specific games or emulators may have unique control schemes. Experiment with different buttons to find the correct actions. The in-game menu (START + SELECT) may offer controller configuration options for some emulators.

Specifications

Warranty and Support

For product support or inquiries, please refer to the contact information provided by your retailer or the manufacturer, OYDL. While specific warranty details are not provided in this manual, extended protection plans may be available for purchase through your retailer to cover your device beyond the standard return period.

• 2-Year Protection Plan: Available for purchase.
• 3-Year Protection Plan: Available for purchase.
• Complete Protect Plan: A monthly subscription plan covering eligible past and future purchases.

Please consult your purchase receipt or retailer's website for details on how to acquire these protection plans and for information regarding returns or replacements.