Ariete 1399 Espresso Coffee Machine User Manual

1. Introduction

Thank you for choosing the Ariete 1399 Espresso Coffee Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before first use and keep them for future reference.

The Ariete 1399 is a compact and versatile espresso machine designed for home use, offering 15 bar pressure for authentic espresso, a maxi-cappuccino device for frothing milk, and a hot water dispenser for other beverages. It is compatible with both ground coffee and ESE (Easy Serving Espresso) pods.

2. Safety Instructions

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions before operating the appliance.
• Do not immerse the appliance, power cord, or plug in water or other liquids.
• Ensure the voltage indicated on the appliance matches your local mains voltage.
• Keep the appliance out of reach of children.
• Unplug the machine from the power outlet when not in use and before cleaning.
• Do not operate the appliance with a damaged cord or plug.
• Avoid contact with hot surfaces, especially the steam wand and coffee dispenser.
• Use only cold, fresh water in the water tank.
• Do not open the filter holder during brewing as hot water and steam may escape.

3. Product Components

Familiarize yourself with the main parts of your Ariete 1399 Espresso Coffee Machine:

Image 3.1: Front view of the Ariete 1399 Espresso Coffee Machine. Key components include the control panel with buttons for 1 or 2 cups, the steam dispensing knob on the side, and the portafilter designed for both ground coffee and ESE pods. The machine has a compact width of 14 cm.

• Water Tank: Removable tank for filling water.
• Control Panel: Buttons for power, 1-cup espresso, 2-cup espresso, and steam function.
• Steam Wand (Maxi-Cappuccino Device): For frothing milk and dispensing hot water.
• Filter Holder (Portafilter): Holds ground coffee or ESE pods.
• Drip Tray: Collects excess liquid and is removable for cleaning.
• Cup Warming Plate: Located on top of the machine.
• Measuring Cup with Tamper: Included for measuring coffee and tamping.
• Cleaning Needle: Included for maintenance.

Image 3.2: Side view showing the transparent, removable water tank with 'MAX' and 'MIN' indicators.

4. Setup

4.1 Unpacking

1. Remove all packaging materials from the machine.
2. Place the machine on a stable, flat, heat-resistant surface.
3. Ensure adequate ventilation around the appliance.

4.2 Initial Cleaning and Priming

1. Wash the water tank, filter holder, and drip tray with warm water and mild detergent. Rinse thoroughly.
2. Fill the water tank with fresh, cold water up to the 'MAX' level.
3. Place a cup under the coffee dispenser.
4. Plug the machine into a power outlet and press the power button. The indicator lights will flash.
5. Once the lights are steady, press the 1-cup button to dispense water. Repeat this process 2-3 times to prime the pump and clean the internal circuits.
6. Perform the same priming process for the steam wand by turning the steam knob to release hot water/steam until a steady flow is achieved.

5. Operating Instructions

5.1 Making Espresso

1. Ensure the water tank is filled.
2. Insert the desired filter into the filter holder (for ground coffee or ESE pod).
3. For Ground Coffee: Add one or two scoops of finely ground espresso coffee to the filter. Tamp the coffee firmly with the included tamper.
4. For ESE Pods: Place one ESE pod into the appropriate filter.
5. Attach the filter holder to the group head and lock it into place by turning it to the right.
6. Place one or two cups on the drip tray under the coffee dispenser. The drip tray height is adjustable to accommodate various cup sizes.

Image 5.1: The adjustable drip tray allows for various cup heights, as shown with coffee dispensing into a tall glass.

7. Press the 1-cup or 2-cup button depending on your selection. The machine will start brewing.
8. Once the desired amount of coffee is dispensed, the machine will stop automatically.

Image 5.2: Two espresso shots being dispensed simultaneously into small glasses.

5.2 Making Cappuccino / Frothing Milk

1. Prepare your espresso as described above.
2. Fill a pitcher with cold milk (dairy or non-dairy) to about one-third full.
3. Press the steam button on the control panel. The indicator light will flash and then become steady when the machine reaches the correct temperature for steam.
4. Position the steam wand into the milk, just below the surface.
5. Slowly turn the steam dispensing knob to release steam. Move the pitcher up and down to create foam.

Image 5.3: A hand holding a metal pitcher, frothing milk using the steam wand of the Ariete 1399.

6. Once the milk is frothed to your desired consistency, turn the steam knob off and remove the pitcher.
7. Immediately clean the steam wand with a damp cloth to prevent milk residue from drying.
8. Pour the frothed milk over your freshly brewed espresso.

5.3 Hot Water Dispensing

The steam wand can also dispense hot water for teas, infusions, or to pre-warm cups.

1. Ensure the water tank is filled.
2. Place a cup under the steam wand.
3. Press the steam button. Wait for the indicator light to become steady.
4. Turn the steam dispensing knob to release hot water.
5. Turn the knob off when you have dispensed the desired amount of hot water.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your espresso machine.

6.1 Daily Cleaning

• Filter Holder and Filter: After each use, remove the filter holder, discard the coffee grounds/pod, and rinse the filter holder and filter under running water.
• Drip Tray: Empty and rinse the drip tray daily or when the indicator shows it is full.
• Steam Wand: Immediately after frothing milk, wipe the steam wand with a damp cloth to remove any milk residue. Purge a small amount of steam to clear the nozzle.
• Water Tank: Rinse the water tank daily and refill with fresh water.
• Exterior: Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.

6.2 Descaling

Over time, mineral deposits (limescale) can build up in the machine, affecting performance. Descale your machine every 2-3 months, or more frequently if you have hard water.

1. Use a commercial descaling solution suitable for espresso machines, following the manufacturer's instructions.
2. Fill the water tank with the descaling solution and water mixture.
3. Place a large container under the coffee dispenser and steam wand.
4. Run the descaling solution through the coffee dispenser and steam wand until the tank is empty.
5. Rinse the water tank thoroughly and refill with fresh water.
6. Run several tanks of fresh water through the machine to rinse out any descaling solution residue.

6.3 Auto Shut-Off

The Ariete 1399 features an auto shut-off system that activates after 25 minutes of inactivity to conserve energy.

7. Troubleshooting

If you encounter issues with your machine, refer to the following table for common problems and solutions.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

This Ariete 1399 Espresso Coffee Machine comes with a 2-year warranty. The warranty is valid only for purchases made from SILVEOR LIFESTYLE INDIA LLP, the official and exclusive importer of Ariete in India, or through their authorized online partners.

Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For any product-related queries, technical assistance, or warranty support, please contact:

• Importer: Silveor Lifestyle India LLP
• Toll Free Number: 1800 203 3450
• Email: Support@silveorindia.com
• Address: Plot-82 Patparganj Industrial Area, Patparganj, Delhi-110092, India