Introduction
The VanSmaGo Meteor Galaxy Projector SKE-TKQ01 is designed to project realistic starry skies, solar systems, and various celestial bodies onto your ceiling or walls. Featuring 13 interchangeable film discs and a meteor fall effect, this projector creates an immersive visual experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your device.
Package Contents
- 1 x VanSmaGo Meteor Galaxy Projector
- 13 x Film Discs (1 pre-inserted, 12 in boxes)
- 1 x USB-C Cable
- 1 x User Manual
Detailed view of the items included in the product package.
Product Overview
Components and Controls
Detailed diagram illustrating the various components and control buttons of the projector.
- Power On/Off & Meteor On/Off Button: Press to power on/off the projector. Long press to activate/deactivate the meteor effect.
- Timer Button: Press to set auto-off timer (1 hour, 2 hours, 4 hours).
- Rotation Speed Button: Press to adjust the projection rotation speed (3 levels).
- Varicolored Light Button: Controls the ambient light ring on the projector base.
- Focus Adjustment Knob: Rotate to sharpen the projected image.
- Film Disc Tray: Slot for inserting and removing film discs.
- Meteor Effect Knob: Adjusts the intensity or frequency of the meteor effect.
- Type-C Power Input: Connect the USB-C power cable here.
Setup Instructions
1. Unpacking
Carefully remove all components from the packaging. Verify that all items listed in the Package Contents section are present.
2. Power Connection
Connect the provided USB-C cable to the Type-C Power Input (8) on the projector and plug the other end into a compatible 5V/2A USB power adapter (not included).
3. Inserting Film Discs
- Locate the Film Disc Tray (6).
- Gently pull out the tray.
- Place a desired film disc into the tray, ensuring it is seated correctly.
- Slide the tray back into the projector until it clicks into place.
The projector includes 13 unique film discs for various celestial projections.
4. Placement and Angle Adjustment
Place the projector on a stable, flat surface. The projector features a 360° rotatable angle, allowing you to direct the projection onto ceilings, walls, or floors. Adjust the angle as desired.
The projector can cover a projection distance of 6.56ft to 9.84ft and an area of 135.19sq.ft to 255.64sq.ft.
5. Focus Adjustment
Rotate the Focus Adjustment Knob (5) on the top of the projector until the projected image appears clear and sharp on your surface.
Rotate the focus knob to achieve optimal image clarity.
Operating Instructions
1. Power On/Off and Meteor Effect
Press the Power On/Off & Meteor On/Off Button (1) once to turn the projector on. Press again to turn it off. Long press this button to activate or deactivate the meteor fall effect.
To adjust the intensity or frequency of the meteor effect, rotate the Meteor Effect Knob (7).
2. Setting the Timer
Press the Timer Button (2) to cycle through the auto-off timer options: 1 hour, 2 hours, or 4 hours. The projector will automatically shut down after the selected duration.
3. Adjusting Rotation Speed
Press the Rotation Speed Button (3) to select one of the three available rotation speeds for the projected image. This simulates the movement of celestial bodies.
4. Controlling Ambient Light
Press the Varicolored Light Button (4) to change the color or turn off the ambient light ring located on the base of the projector.
Maintenance
1. Cleaning the Lens and Discs
Use a soft, dry, lint-free cloth to gently wipe the projector lens and film discs. Avoid using abrasive cleaners or solvents, as these can damage the surfaces.
2. Storage
When not in use, store the projector in a cool, dry place, away from direct sunlight and excessive dust. Keep film discs in their protective cases.
Troubleshooting
1. No Projection or Dim Image
- Ensure the projector is properly connected to a 5V/2A power source.
- Check if the film disc is correctly inserted and not obstructed.
- Verify that the room is sufficiently dark for optimal projection.
- Adjust the focus knob to ensure the image is not just blurry but also visible.
2. Blurry Image
- Rotate the Focus Adjustment Knob (5) until the image becomes sharp.
- Ensure the projection distance is within the recommended range of 6.56ft to 9.84ft.
3. No Rotation
- Press the Rotation Speed Button (3) to ensure a rotation speed is selected.
- Check for any physical obstructions preventing rotation.
4. Meteor Effect Not Working
- Long press the Power On/Off & Meteor On/Off Button (1) to ensure the meteor effect is activated.
- Adjust the Meteor Effect Knob (7) to check for intensity settings.
5. Unusual Noise
- Ensure the projector is placed on a stable, flat surface.
- Check for any foreign objects near the rotation mechanism.
- If the noise persists, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model | SKE-TKQ01 |
| Brand | VanSmaGo |
| Color | White |
| Shape | Round |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Light Source Type | LED |
| Power Source | USB-C (5V/2A) |
| Voltage | 5 Volts |
| Wattage | 5 Watts |
| Item Weight | 500 Grams (1.1 pounds) |
| Product Dimensions | 5.31 x 5.51 x 4.65 inches |
| Projection Distance | 6.56 ft to 9.84 ft (2m to 3m) |
| Projection Area | 135.19 sq.ft to 255.64 sq.ft (12.56 m² to 23.75 m²) |
| Special Features | 13 Film Discs, Meteor Effect, HD Projection, Adjustable Focus, 360° Rotation, Auto-Off Timer |
Warranty and Support
Warranty Information
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact the seller for specific details regarding warranty coverage and duration.
Customer Support
For any questions, technical assistance, or support inquiries, please contact VanSmaGo customer service through the platform where the product was purchased. Ensure you have your model number (SKE-TKQ01) and purchase details ready.
