Dyson 481761-01

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Dyson Digital Slim Cordless Vacuum

Model: 481761-01

Introduction

The Dyson Digital Slim™ Cordless Vacuum is engineered for powerful performance in a lightweight and versatile format. Designed to tackle deep cleaning tasks, it offers up to 40 minutes of fade-free suction in Eco mode. Its advanced whole-machine filtration system captures pet allergens and fine dust, expelling cleaner air. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance of your new Dyson vacuum.

Dyson Digital Slim Cordless Vacuum with attachments

Figure 1: Dyson Digital Slim Cordless Vacuum and included accessories.

What's in the Box

Your Dyson Digital Slim Cordless Vacuum comes with the following components:

  • Dyson Digital Slim Vacuum cleaner: The main unit with motor and dust bin.
  • Wand: The lightweight extension tube for floor cleaning.
  • Motorbar™ cleaner head: Designed for deep cleaning all floor types and de-tangling hair.
  • Close-up of Motorbar cleaner head with internal components

    Figure 2: Motorbar™ cleaner head.

  • Combination tool: A versatile tool combining a wide nozzle and brush for dusting and debris pickup.
  • Crevice Tool: A long, narrow tool for cleaning in tight gaps and edges.
  • Crevice tool being used to clean a narrow gap

    Figure 3: Crevice Tool in use.

  • Docking station and charger: For convenient storage and charging of the vacuum.
  • Dyson Digital Slim vacuum docked on a wall-mounted charging station

    Figure 4: Wall-mounted docking station.

Setup

Assembly

  1. Unpack all components from the box.
  2. Attach the wand to the main vacuum body by aligning the red connectors and pushing until it clicks into place.
  3. Attach the Motorbar™ cleaner head to the other end of the wand, ensuring it clicks securely.
  4. For handheld use, detach the wand and attach desired tools directly to the main vacuum body.

Initial Charging

Before first use, fully charge your Dyson Digital Slim vacuum. This typically takes 3.5 hours.

  • Mount the docking station to a wall near a power outlet using appropriate hardware (not included).
  • Connect the charger to the docking station and plug it into a power outlet.
  • Place the vacuum into the docking station. The LCD screen will indicate charging status.

Operating the Vacuum

Power Modes

The Dyson Digital Slim offers three power modes, displayed on the LCD screen, to suit different cleaning tasks:

  • Eco Mode: Provides the longest run time (up to 40 minutes) for everyday cleaning on all floor types.
  • Med Mode: Offers a balance of power and run time for general cleaning.
  • Boost Mode: Delivers maximum suction for intensive spot cleaning and stubborn dirt. Note: This mode significantly reduces run time.
Close-up of Dyson Digital Slim LCD screen showing battery life and time remaining

Figure 5: LCD screen displaying battery life and power mode.

Cleaning Versatility

The cordless format allows for versatile cleaning throughout your home and car:

  • Floor Cleaning: Use with the wand and Motorbar™ cleaner head for carpets and hard floors.
  • High-reach Cleaning: Detach the cleaner head and use the wand with the combination tool for elevated surfaces.
  • Handheld Cleaning: Remove the wand and attach tools directly to the main body for upholstery, stairs, and car interiors.
Dyson Digital Slim being used in various cleaning scenarios: high, low, and car

Figure 6: Versatile cleaning with the Dyson Digital Slim.

Maintenance

Emptying the Dust Bin

Empty the dust bin when debris reaches the MAX mark. This is a no-touch process:

  1. Hold the vacuum over a trash bin.
  2. Push the red lever down firmly to release the bin and eject debris.
  3. Close the bin until it clicks securely.
Hand operating the no-touch bin emptying mechanism

Figure 7: No-touch bin emptying.

Filter Maintenance

Regularly clean the filter to maintain optimal suction and filtration performance. Refer to the filter diagram on the vacuum for guidance.

  • Twist and pull the filter from the top of the main body.
  • Wash the filter under cold running water until the water runs clear.
  • Leave the filter to dry completely for at least 24 hours in a warm, dry place before reinserting.

Troubleshooting

ProblemPossible CauseSolution
No power/short run timeBattery not charged; filter blocked; power mode too high.Fully charge battery; wash and dry filter; use Eco or Med mode.
Reduced suctionDust bin full; filter blocked; blockage in wand/cleaner head.Empty dust bin; wash and dry filter; check for and clear blockages.
Cleaner head not spinningBlockage in brush bar; incorrect attachment.Remove brush bar and clear debris; ensure correct head is attached.

Table 1: Common Troubleshooting Steps.

Specifications

FeatureDetail
BrandDyson
Model NameDigital Slim
Model Number481761-01
ColorIron/Nickel
Special FeatureCordless, Bagless
Filter TypePre/post motor
Capacity0.1 Gallons
RuntimeUp to 40 minutes (in Eco mode)
Charging Time3.5 Hours
Item Weight4.4 pounds
Product Dimensions31.1"L x 9.84"W x 9.92"H
Battery TypeLithium-Ion
Control MethodTouch, Push Button
Number of Speeds3

Table 2: Product Specifications.

Warranty and Support

Your Dyson Digital Slim Cordless Vacuum comes with a 2-year warranty. For any product inquiries, troubleshooting assistance beyond this manual, or warranty claims, please contact Dyson customer support. Lifetime Dyson support is available for your product.

For more information, visit the official Dyson website or refer to the contact details provided in your product packaging.

© 2025 Dyson. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.