Wuloo MTY0102

Wuloo Solar Driveway Alarm System MTY0102 Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Wuloo Solar Driveway Alarm System MTY0102. Please read this guide thoroughly before use to ensure optimal performance and longevity of your device.

What's in the Box

Your Wuloo Solar Driveway Alarm System MTY0102 package includes the following components:

  • 4 x Motion Sensors (Solar Powered)
  • 1 x Receiver (Indoor Unit)
  • 1 x USB-C Charging Cable
  • 4 x Mounting Screws
  • 4 x Wall Anchors
  • 1 x Screwdriver
  • 1 x User Manual
Contents of the Wuloo Solar Driveway Alarm System package
Image: All components included in the Wuloo Solar Driveway Alarm System MTY0102 package, laid out on a surface. This includes four black motion sensors, one black receiver, a USB-C cable, mounting hardware, a screwdriver, and the user manual.

Product Features

  • Expandable System: The driveway alarm system can connect to more sensors and receivers to expand the detection range. Up to 8 sensors can connect with one receiver.
  • Solar Powered & Weatherproof: Equipped with a rechargeable battery and solar panel, the sensor can operate for up to 24 months on a full charge. Its waterproof design ensures reliable performance in rain or snow.
  • Adjustable Sensitivity: Features 3 levels of sensitivity (Low, Medium, High) to prevent false alarms from small animals or environmental factors like leaves, while ensuring detection of larger movements.
  • Multiple Work Modes: Each sensor offers 4 work modes: Mute (no sound & no light), Light On & Sound On, Sound On Only, and Light On Only.
  • Customizable Melodies: The receiver has 16 adjustable chimes, allowing you to set different melodies for different sensors to distinguish detection areas.
  • Long Range & Reliable: Guaranteed 1/3-mile (approx. 1760 feet) long range for signal transmission between sensor and receiver, tested in real-world settings with various obstructions. The motion detection range is up to 25 feet.
Aerial view of a large property with multiple Wuloo sensors placed at various entry points, indicating expandability.
Image: An aerial view illustrating a large property with several Wuloo sensors strategically placed at different entrances and pathways, demonstrating the system's expandability by adding more sensors and receivers.
A Wuloo sensor detecting a car entering a driveway from 1/3 mile away, highlighting its long signal range and 30ft detection range.
Image: A Wuloo sensor mounted on a post next to a driveway, with a red cone indicating a 30ft detection range. A car is shown entering the driveway, and a graphic illustrates a 1/3 mile signal transmission range to a receiver inside a house.
A Wuloo sensor with a solar panel being charged by sunlight, and another sensor shown under heavy rain, demonstrating its weatherproof design.
Image: Two panels showing the Wuloo sensor's durability. One panel shows the sensor's solar panel being charged by sunlight. The other panel shows the sensor operating effectively during heavy rain, highlighting its weatherproof capabilities.
Multiple scenarios where the Wuloo sensor can be used, including driveways, walking paths, front doors, and garages.
Image: A collage of four images demonstrating various applications for the Wuloo sensor: detecting movement in a driveway, along a walking path, near front doors, and inside a garage.

Setup Guide

1. Connecting the Receiver to Power

Plug the receiver into a standard AC power outlet (110V-220V). The receiver is designed to operate continuously when plugged in.

Video: Demonstrates how to connect the Wuloo receiver to a power outlet, showing it being plugged into both a power strip and a wall socket. The receiver displays a channel number and emits a "Welcome" sound upon connection.

2. Setting the Sensor (Melody, Work Mode, Sensitivity)

The sensor comes with pre-configured default settings if purchased as a set. You can customize the melody, work mode, and sensitivity using the controls located under a protective flap on the sensor.

  • Melody Setting: Press the melody button to cycle through 12 available melodies.
  • Work Mode Setting: Select from 4 modes: Light Flash & Alarm Sound, Light Flash Only, Alarm Sound Only, or Mute (no sound & no flash).
  • Sensitivity Setting: Choose between High (H), Medium (M), or Low (L) sensitivity to adjust detection range and prevent false triggers.
Close-up of the Wuloo sensor's control panel, showing buttons for ON/OFF, Melody, Work Mode, Sensitivity, and charging port.
Image: A detailed view of the Wuloo sensor's underside, revealing the control panel with buttons for power ON/OFF, melody selection, work mode adjustment, sensitivity settings (L, M, H), a DC 5V charging port, and a solar panel on top. A ball-joint allows for angle adjustment.
Video: A demonstration of how to set the Wuloo sensor's melody, work mode, and sensitivity. It shows using a small tool to adjust the switches under the protective flap.

3. Setting the Receiver (Volume, Melody)

Adjust the receiver's volume and select melodies for different sensors.

  • Volume Setting: Press the volume button to select from 4 volume levels, including a mute option.
  • Melody Setting: The receiver has 16 ringtones. To assign specific melodies to different sensors, you must enter pairing mode.
Close-up of the Wuloo receiver's buttons for melody selection, volume control, and pairing.
Image: A close-up of the Wuloo receiver, highlighting its melody setting button, volume button, and a 'PAIRED' button for entering pairing mode and selecting channels.
Video: Demonstrates how to change the chime on the receiver for different sensors, showing the process of pressing buttons to select melodies.

4. Charging the Sensor

Sensors are partially charged from the factory. Fully charge them before installation. A red light indicates charging, and a green light indicates a full charge.

Video: Illustrates the process of charging the Wuloo sensor. It shows the sensor's power indicator flashing red when low on power, turning red during charging, and green when fully charged.

5. Installing the Sensor

After fully charging, install the sensor in your desired outdoor location using the provided screwdriver and mounting hardware. Adjust the ball-joint to achieve the optimal detection angle.

Video: Shows the installation of the Wuloo sensor onto a tree trunk using a screwdriver. It also demonstrates how to adjust the sensor's angle via its ball-joint mount after installation.

Operating Instructions

Once set up, your Wuloo Driveway Alarm System operates automatically. The sensors detect motion and transmit a signal to the receiver, which then alerts you with the chosen melody and/or light flash.

  • Turning ON/OFF: Press and hold the power button on the sensor for 3 seconds.
  • Monitoring: The sensor will detect movement within its set range and trigger the receiver according to its configured work mode.
  • Alerts: The receiver will display the channel number of the triggered sensor and play the assigned melody.

Additional Settings

1. Adding More Sensors

You can expand your system by purchasing additional sensors. To add a new sensor:

  1. Charge the new sensor fully.
  2. On the receiver, press and hold the PAIR button to enter pairing mode. Set the desired melody and channel number for the new sensor.
  3. Wave your hand in front of the new sensor to activate its detection and complete the pairing process.
Video: Demonstrates how to pair and add more sensors or receivers to the Wuloo system. It shows the steps of entering pairing mode on the receiver, setting channel numbers and melodies, and activating new sensors.

2. Adding More Receivers

To hear alarms in different rooms, you can add more receivers:

  1. Plug the new receiver into an AC power outlet.
  2. Press and hold the PAIR button on the new receiver to enter pairing mode. Set the desired ringtone and channel number.
  3. Activate the sensor (by waving your hand in front of it) to pair it with the new receiver.
Video: Demonstrates how to pair and add more sensors or receivers to the Wuloo system. It shows the steps of entering pairing mode on the receiver, setting channel numbers and melodies, and activating new sensors.

3. Clearing Pairing History (Reset)

To clear all paired devices from a receiver:

  • Press and hold both the PAIR button and the VOLUME button on the receiver simultaneously for 2 seconds.
  • You will hear a

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.