NAVFS B3

NAVFS Smart Bird Feeder with 2K Camera and Solar Power

Model: B3

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your NAVFS Smart Bird Feeder. This device combines a bird feeder with a high-definition camera, solar charging capabilities, and artificial intelligence for bird identification, offering an enhanced bird-watching experience.

NAVFS Smart Bird Feeder in a snowy backyard scene with a cardinal eating seeds.

Image: The NAVFS Smart Bird Feeder, showcasing its design with a solar panel and a bird perch, set in a winter environment.

Safety Information

  • Ensure the feeder is securely mounted to prevent falling, which could cause injury or damage.
  • Keep the charging port dry and clean. Do not expose it to moisture during charging.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
  • Position the solar panel in an area that receives direct sunlight for optimal charging performance.
  • Regularly clean the feeder to maintain hygiene for visiting birds and ensure clear camera views.

Package Contents

Verify that all items are present in your package:

  • Smart Bird Feeder Unit with Camera
  • Feeder Cover
  • Bird Perch
  • 3W Solar Panel with Cable
  • Mounting Bracket
  • Mounting Kit (Screws, Anchors, Strap)
  • Type-C Charging Cable
  • External Antenna
  • Fruit Holders (6x)
  • Jelly Feeder (1x)
  • Ejector Pin
  • User Manual
  • Drilling Template Sticker
  • Solar Bracket Positioning Sticker
  • Bracket Screwdriver
All components of the NAVFS Smart Bird Feeder laid out on a wooden floor.

Image: An unboxing view showing all included accessories and the main feeder unit.

Setup Instructions

1. Initial Charging

Before first use, fully charge the feeder's internal 5200mAh battery using the provided Type-C charging cable. The solar panel will maintain the charge once installed, but an initial full charge is recommended.

2. Physical Assembly

  1. Attach the Feeder Cover: Secure the blue feeder cover onto the top of the main unit.
  2. Install the Bird Perch: Attach the bird perch to the front of the feeder. This provides a landing spot for birds.
  3. Connect the External Antenna: Screw the external antenna into the designated port on the feeder unit for improved Wi-Fi signal reception.
  4. Install Fruit Holders and Jelly Feeder (Optional): Insert the six fruit holders and the jelly feeder into their respective slots on the perch for offering additional food types.

3. App Installation and Device Pairing

  1. Download the App: Scan the QR code in the user manual or search for the "NAVFS Bird Feeder" app in your device's app store.
  2. Create an Account: Follow the in-app instructions to register a new user account.
  3. Add Device: Power on the bird feeder. In the app, select "Add Device" and follow the on-screen prompts to connect the feeder to your 2.4Ghz Wi-Fi network. (Note: 5Ghz Wi-Fi is not supported.)

4. Mounting Options

The NAVFS Smart Bird Feeder offers versatile mounting options:

  • Wall Mount: Use the mounting bracket, screws, and anchors to secure the feeder to a wall.
  • Tree Mount: Utilize the provided strap to attach the feeder securely around a tree trunk.
  • Pole Mount: The feeder can be mounted on a pole (maximum 0.97 inches diameter) using the appropriate bracket.

Ensure the solar panel is positioned to receive maximum direct sunlight throughout the day to maintain battery charge.

Diagram showing three different mounting options for the NAVFS Smart Bird Feeder: wall mount, pole mount, and tree mount.

Image: Visual guide illustrating various installation methods for the bird feeder.

Operating Instructions

1. Live Video and Recording

Access the live 2K HD video feed through the app. The 160° wide-angle lens captures a broad view of your feeder. The camera supports both day and night vision, ensuring clear footage at all times.

Split image showing the NAVFS Smart Bird Feeder camera view during day and night, with a bird on the perch.

Image: Comparison of the camera's 2K high-definition day and night vision capabilities.

2. AI Bird Identification and Notifications

The integrated AI system can identify over 10,000 bird species (30-day trial included). When a bird is detected, you will receive instant notifications on your smartphone, including the identified species.

Smartphone screen showing an instant notification from the bird feeder app, identifying a Northern Cardinal.

Image: An example of an instant notification received when a bird is recognized by the feeder's camera.

Graphic illustrating the AI bird identification feature, showing a cardinal and a notification of 'Northern Cardinal'.

Image: The advanced AI system identifies over 10,000 bird species.

3. Storage Options

The bird feeder supports two storage methods for captured video clips:

  • Cloud Storage: A 30-day trial is included. Captured events are saved securely in the cloud.
  • SD Card Storage: Supports up to 128GB SD card (not included) for local storage of recordings.
Illustration showing local SD card storage and cloud storage options for the bird feeder camera.

Image: The feeder supports both local SD card and cloud storage for video recordings.

4. Sharing Access

You can share access to your bird feeder's live feed and recordings with family and friends through the app, allowing multiple users to enjoy the bird-watching experience simultaneously.

Four panels showing different groups of people watching live bird feeder video on their smartphones and tablets.

Image: The app allows up to four devices to watch live video simultaneously.

Maintenance

  • Cleaning: Regularly clean the feeder and camera lens to prevent mold, bacteria, and obstructions. Use a soft, damp cloth for the camera lens.
  • Refilling: The 1.3L capacity seed container reduces the frequency of refills. Check seed levels periodically.
  • Battery: The solar panel continuously charges the 5200mAh battery. In prolonged cloudy weather, manual charging via the Type-C port may be necessary.
  • Weather Protection: The feeder is IP65 waterproof. Ensure the charging port cover is securely closed to maintain water resistance.
Image showing the NAVFS Smart Bird Feeder being rained on, highlighting its IP65 weather resistance and drainage design.

Image: The feeder's IP65 waterproof rating and drainage system ensure durability in outdoor conditions.

Troubleshooting

IssuePossible Solution
Feeder not connecting to Wi-Fi
  • Ensure your Wi-Fi is 2.4Ghz (5Ghz is not supported).
  • Check Wi-Fi signal strength at the feeder's location.
  • Restart your router and the bird feeder.
  • Verify correct Wi-Fi password entry in the app.
Poor video quality
  • Clean the camera lens.
  • Ensure adequate lighting (for day vision).
  • Check Wi-Fi connection stability.
Battery not charging
  • Ensure the solar panel is clean and receives direct sunlight.
  • Check the connection between the solar panel and the feeder.
  • Manually charge the feeder using the Type-C cable.
No bird detection notifications
  • Verify app notification settings are enabled.
  • Check motion detection sensitivity in the app.
  • Ensure the AI bird identification trial is active or subscribed.

Specifications

  • Brand: NAVFS
  • Model: B3
  • Camera Resolution: 2K HD
  • Field of View: 160° Ultra-wide angle
  • Connectivity: 2.4Ghz Wi-Fi (5Ghz not supported)
  • Power Source: 5200mAh Lithium Ion Battery (included), 3W Solar Panel
  • Storage: Cloud Storage (30-day trial), SD Card (Max 128GB, not included)
  • AI Features: Bird AI Recognition (30-day trial)
  • Waterproof Rating: IP65
  • Seed Capacity: 1.3 Liters
  • Material: Metal, Plastic
  • Product Dimensions: 12.01"L x 7.28"W x 10.87"H
  • Item Weight: 4.22 pounds

Warranty and Support

Your NAVFS Smart Bird Feeder is covered by a manufacturer's warranty. For detailed warranty information, product support, or technical assistance, please refer to the contact information provided in the original product packaging or visit the official NAVFS website.

For any issues not covered in this manual, please contact NAVFS customer service.

© 2025 NAVFS. All rights reserved.

Related Documents - B3

Preview Wansview B3 Battery-Powered 1080P Home Security Camera Quick Installation Guide
A comprehensive guide to installing and setting up the Wansview B3, a wire-free, battery-powered 1080P home security camera. Learn about its features, components, indicator lights, button controls, installation process, and advanced functionalities like cloud storage and motion detection.
Preview MiBoxer FUT037W RGB LED Controller: WiFi + 2.4G User Guide
Comprehensive guide to the MiBoxer FUT037W RGB LED Controller, covering features, parameters, app installation, control methods (WiFi, Bluetooth, 2.4G), voice assistant integration (Alexa, Google Home), and dynamic modes.
Preview Brennan Network Connection and WiFi Troubleshooting Guide
A comprehensive guide for Brennan users on setting up WiFi, understanding network connections, and troubleshooting common WiFi and network issues for models B3, B3+, B2, BB1, and Helix.
Preview Brennan VB1: Guide to Recording Audio on B3 and B3+ Devices
Learn how to use the Brennan VB1 to digitize and stream audio from turntables, cassette decks, and other analog sources to your Brennan B3 or B3+ system via WiFi. This guide covers setup, input level adjustment, recording, track splitting, and renaming.
Preview ZKTeco VDP03-B3 Kit Quick Installation Guide
Comprehensive guide for installing and operating the ZKTeco VDP03-B3 Kit residential video door phone system. Includes setup instructions, functions, wiring diagrams, and troubleshooting.
Preview PARKSIDE PHLA 20-Li A1 Cordless LED Hand Light User Manual
Comprehensive user manual for the PARKSIDE PHLA 20-Li A1 Cordless LED Hand Light, covering intended use, safety instructions, technical data, operation, charging, and disposal.